subcategories
(3rd category level)
Manufacturer:
(Category: 706)
GEA-INTEDAS vertical tank made of AISI 304L stainless steel. On legs. Capacity: 6000l. 4 lower outputs and 1 upper entrance. With aeration valve and top manhole cover. Atmospheric. Design temperature: 90º. Previous use: mains water. Series No.: 10D100. Dimensions: Diameter: 1500mm. Height 5280mm.
Complete brewery 2 appliances - 6 hl per brew 1 brew per day possible Year of manufacture 2013 - Manufacturer: Caspar Schulz / Germany Consisting of: malt reception and transport 2 devices brewhouse - lauter tun - wort cooler - fermentation and storage tanks - brewhouse technology complete - bottle filler - KEG cleaner etc. - PROJECT: BRAU-KOMPLETT-25-6HL-2GER-HEBAF
We have tanks from 2.000 lit – 18.000 lit. 63 differnet tanks. Prices are 0,35 €/lit – 0.65 € /lit.
Siphon / Bottle / Party Keg Filler 1 digit GTH 0.5 to 3 liter bottles + 5L party kegs 30 containers/h Dependent on the operator Semi-automatic Year of construction 2025
Manufacturer: Radenska-Steinle / Germany Type: RP 20/125 Spray heads: 20 Bottles 0.50 + 1.00 L + 1.5 liters Complete V2A Running Direction: Left to Right Year of Make: 1996 With control cabinet Film available - Please request
Krones Sleevematic – Multireel – Shrinkmat Sleeve Labeling System Complete shrink sleeve labeling solution combining three advanced Krones technologies into a fully integrated system for the decoration and labeling of PET and glass containers. The system ensures high precision, continuous operation, and maximum production efficiency in modern beverage bottling lines. General Information - Manufacturer: Krones - System Type: Shrink sleeve application and shrinking system - Maximum Capacity: up to 39,000 bottles per hour - Bottle Sizes: 250 ml – 1,500 ml - Container Types: PET and glass bottles Delivery Scope - The system includes the following equipment: - 1 × Krones Sleevematic TS - 1 × Krones Multireel S - 1 × Krones Shrinkmat System Components Krones Sleevematic TS - High-performance sleeve applicator designed for precise application of shrink sleeves on ...
- Grapes: 500 kg - Dimensions: height 100 cm, diameter 90/95 cm - Condition: OK / Used
- Year of construction: 2022 Cooling: - from 30 °C to 25 °C = 29 kW - from 15 °C to 0 °C = 15.4 kW - Connected load : 8.8kW, 15.6A - Dimensions : 1.05m x 1.05m x 1.75m (L x W x H) - Machine in very good condition - Very few hours of operation!
This 2015 TOMSA DESTIL Alcohol Dehydration Plant is designed for the large-scale production of high-purity ethanol. It processes distilled alcohol (95.5% v/v) into dehydrated alcohol with up to 99.8% v/v concentration, suitable for beverages, industrial applications, or biofuel. The plant has a nominal capacity of 90,000 liters per day and operates with advanced molecular sieve technology using pressure swing adsorption (PSA), ensuring high efficiency, low energy consumption, and fully automated operation. Condition & Usage The plant was barely used and only produced 2,000 m³ of dehydrated alcohol during its operation, leaving the equipment in excellent condition. Key Features - Capacity: 90,000 L/day dehydrated alcohol (99.8% v/v). - Feedstock: Distilled alcohol at 95.5% v/v. - Technology: Molecular sieve dehydration with PSA system. - Fully automated and continuous operation. Fi ...
Set of blow molds for PET blowing machine Sidel SBO Universal - 10 molds HR for heat resistent bottle 1.0 litre - 10 molds for standard bottle1.0 litre Molds were used to produce PET bottles for juices Low working hours Molds are n very good condition Available immediately Can be customised
Twinpack automatic handle applicator model MGE Manufacturing year 2010 Setting handles on shrinked bottles packs Capacity up to 50 packs per minute Siemens S7 machine drive CE control panel Machine in very good condition Recently dismantled and now stored dry and clean in warehouse Available immediately
Atlanta wrap around carton packer mod Giotto Manufacturing year 2015 Capacity : 20 cartons per minute for 1.5L PET bottles and 16 cartons per minute for 1.0L PET bottles Wrap around case packer - entry on single lane Processing neutral or printed cartons Cartons sizes currently processed: 80 x 262 for 12 bottles1.5L and 87 x 322 for 16 bottles 1.0L Siemens S7 machine drive with touch screen User friendly HMI interface CE electrical panel Machine recently dismantled and stored dry and clean. Machine in very good condition. Available immediately
Carbonator KHS Process Technik CX 30 upgraded by KHS 2014 Processing carbonated mineral water at max 8 g/litre Capacity 30.000 litres per hour Equipment complete with pumps, tank, flowmeter and all its accessories Drive Siemens S7 Equipment in perfect working condition Was in production till March 2025 Still installed, will be dismantled Available immediately
KHS InnoPET Blomax 8 blow moulding machine Manufacturing year 2009 Capacity 14.400 bph Set for 8 quick change molds Personnalisation for preform neck 29/25 still mineral water Linear oven equipped low consumption Machine composed by: - preforms pallets tipper, hopper & feeder - PCC drive & control - KHS electrical cabinet - HP air recycling system The full air conveyor system EZS is available in option. Machine very well serviced is in exceptional condition. Machine in production till end June 2026
Kosme KSB6R rotative PET blow moulding machine manufacturing year 2008 with full upgrade by Kosme in 2024 with linear oven and 8 heating modules rotative blowing wheel for 6 quick change molds personnalisation for preform neck 21/29 Machine equipped with: -pallet preform tipper and hopper -preform elevator & conveying system, -preform unscrambler & preform infeed rail -Kosme linear oven & rotative blowing wheel -Kosme machine control by touch screen& drive -Kosme electrical cabinet Machine in production till end November 2025 Excellent machine and opportunity
Sidel SBO 6 series 2 manufacturing year 2000 with full upgrade by Sidel 2024 Capacity 7.800 bph Set for quick change molds Personnalisation for preform neck 29/21 Machine equipped with: Sidel preforms tipper Sidel preforms hopper & feeder Sidel Caterpillar oven & blowing wheel for 6 molds Solenoid valves Sidel Universal type Retrofit of elongation sensor PCC Sidel version V2.02 Sidel electrical cabinet Machine in production till end November 2025 Excellent blowing machine
Pressure filler Ortmann + Herbst/Crown Simplimatic 100/15/15 with 100 filling valves, 15head crown corker and 15head Zalkin aluminium cap screw capper with Pick and Place System model: Hansa M year of construction: 1999 running direction: left - right pitch: 113 mm with double pre-evacuation capacity: up to 40,000 bph by 250 ml mineral water bottles up to 30,000 bph by 330 ml beer glass bottles electrics: Siemens S7 with touch panel with safety cladding
60,000 litre service water tank UTH made of V2A insulated horizontal Properties: Volume 60000 L Overall length 6100 mm Cylinder length 4500 mm Total height 4300 mm Diameter 4200 mm Material V2A (AISI 304) 1.4301 Insulation 150 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Horizontal design Number of feet 4 Description: Tank crest: CIP Ball Ventilation nozzle In front: Level indicator with scale Manhole 440 x 340 mm Ladder hooks Residual drain with disc valve Thermometry Subsoil: 4 trumpet feet with domes - height adjustable with bearing cup stiffener Thermometry Behind: Connection Thermometry
Vacuum filler bloc BERTOLASO COBERT with 48 filling valves blocked with 8head screw Closermachine, aluminium work direction: right to left year of manufacturing: 1995, with safety housing Siemens S 7 control system CIP able central valve adjustment fixed for one bottle size technical inspected and ready to work
Measure filler KHS-Seitz Compakta with 12 filling valves capacity: up to 2.500 bph by 1,0 ltr.
Mixing tank type D 63 F Properties: Total height 1020 mm Width 400 mm Overall length 620 mm Installed motor power 0.18 kW from Mischtechnik GmbH, Ottobrunn Type V 1
Tetra Pak TBA19 200 ml Slim Aseptic Filling and Packaging Line Complete aseptic carton filling and packaging line designed for 200 ml Slim cartons. This line combines proven Tetra Pak filling, straw application, shrink wrapping, and secondary packaging equipment, making it an ideal solution for dairy, juice, and beverage producers seeking reliable aseptic packaging technology. Line Configuration - The system includes the following Tetra Pak equipment: - Tetra Pak TBA19 200 S Filling Machine - Tetra Pak Straw Applicator 21 - Tetra Pak Multi Shrink Wrapper TFW 72 - Tetra Pak Cardboard Packer 70 - This configuration provides a complete production flow from filling to final carton packaging. 1. Tetra Pak TBA19 200 S Filling Machine - Manufacturer: Tetra Pak - Model: TBA19 200 S - Specification: 648160-0101 - Year of Manufacture: 1998 - Operating Hours: 16,727 h - Filling ...
Press line with ACP 1500 and APEX 1600, capacity: approx. 14 to/h Continuously operating with integrated post-extraction of the pomace to increase the yield Compac press type: ACP 1500, belt width 1,500mm, length of the press approx. 4,515mm, width: 2,440mm and height approx. 2,180mm, Pressing Belt / Sieve Belt Maiche inlet funnels, juice drip trays Pneumatic cylinders for belt tension, pneumatic control, piping Belt cleaning by means of a rotating brush roller and belt scraper blade; Mash Pump Type: AMP 580, Progressive Cavity Pump in Compact Design Pressing line with APEX 1600 To obtain fruit juices to obtain particularly high yields, with an integrated system of post-extraction of the pomace Footprint: 3,500mm x 2,500mm, with:
Tribloc Eurostar 12/12/1 type: Uniblock MEC ISO DPS 12/12/1C with 12 rinsing stations pressure filler with 12 filling valves and 1 head crowner capacity: approx. 2.500 bph isobaric, with vacuum pump pre-evacuation with height adjustment fixed for 330 ml bottles with 26 mm crown cork
Tribloc Cime Careddu DPS 12/12/1 with 12 rinser stations pressure filler with 12 filling valves and 1 head crowner capacity: approx. 2.500 bph isobaric, with vacuum pump pre-evacuation with height adjustment fixed for 330 ml, 500 ml, 750 ml bottles
Pressure filler Vipoll GEA type: Visipraktik VKR-ES-DN 12-3 K capacity: up to 3.000 bph double pre-evacuation working hours: less than 1.000 for 330 ml bottles bottle diameter: 50 - 105 mm bottle height: 125 - 370 mm
For sale is a semi-automatic cup filling system for drinking yoghurt, ayran or similar. Key data on the plant: - Semi-automatic, i.e. the cup must be inserted and the button pressed for each filling. - Lid diameter: 75 mm - Capacity: Up to 300 ml - Power consumption: 1 kW (230 V plug) - Pneumatic: Compressor required. If you are interested, our compressor can also be purchased. (Please inquire separately!) - Pipe connection DN 32 (direct connection to tank possible, so that the liquid can be sucked off the system with a slope - Country of manufacture: Turkey - Thermal sealing: temperature adjustable. Aluminum lids (75 mm) were used with this system. - Magazine for sealing board available. These are placed on the cup by the system itself - Filling capacity: Variable depending on the filling quantity: 250 ml were filled with this system. Here, about 600 cups/hour were possible. ...
For the height conveying of closures
Bottle washer Klinger type: Euro Class 24/1/844 Capacity: approx. 10,000 bph Steam-heated incl. PCL Siemens S7 suitable for bottles of 200 ml - 1,000 ml Bottle diameter: 50 - 90 mm Bottle height: 110 - 330 mm Currently set up for: - 330 ml longneck - 500 ml longneck - 330 ml swing-top bottle - 500 ml swing-top bottle Dimensions: Length: 10,000 mm Width: 395 mm Height: 285 mm Weight: approx. 20 t
