subcategories
(3rd category level)
Manufacturer:
(Category: 706)
The dealcoholisation is carried out by a dialysis membrane module consisting of up to 8 modules connected in parallel. The mass transfer is driven by the concentration gradient between beer and dialysate (water or dealcoholised beer)., Additional title: dialysis, Capacity: 350 l/h remaining alcohol content: approx. 0,45 %; original alcohol content: approx. 5 %, Length: 3,6 m, Width: 1,7 m, Height: ca. 8,4 m, Weight: 900 kg, Operation / Control: Control cabinet with operating buttons and touch display, Features: 6 membrane modules, column DN400; plate heat exchanger TS6-MFG, Alfa Laval, year of manufacture 2006
Tank trailer - semi-trailer with bright beer tank for beer transport; the construction year of the trailer is 2012., Additional title: Horizontal stainless steel pressure tank on a mobile trailer, Volume: 25250 Liter , Operating pressure: 3 bar , Systemic volume: 25250 Liter, Material: Stainless steel, Position: lying on a semi trailer
Crate washer for longitudinal plastic crates with 3 cleaning levels on top of each other and dirt discharge with collection vessel. 1st level: Soaking basin with pump suction channels. 2nd level: Main spraying with upward turner and conveyor. 3rd level: Final spraying with upward turner and conveyor with water collection pool., Additional title: 2500 crates per hour, Capacity: 2500 crates/h, Volume of soaking bath: 2 m3, Power: 24,6 kW, Voltage: 380 V, Frequency: 50 Hz, Length: 6,5 m, Width: 1,4 m, Height: 3,0 m, Weight: 4300 kg, Formats: NRW crates (400x300x290 mm), NRW handy crates (400x300x300 mm), Pinolen crates (395x300x270 mm), Running direction: crates longitudinal, Material: stainless steel cladding, Base construction: standing on 4 feet, Features: 2 x crate turner, soaking basin, main spray jets, second spray jets, dirt expulsion with collection vessel, caustic dosing system
Beer transport tank in a shipping container, with CIP spray head and manhole. Includes a metering system (max. flow rate: 120 l/min)., Additional title: Stainless steel pressure tank housed in a container, Capacity: 7200 l, Operating pressure: 2,5 bar, Operating temperature: 20 °C, Length: 7,25 m, Width: 2,4 m, Height: 2 m, Features: control, pump, hose reel, flow meter, cable drum, fittings, CIP spray head, manhole
Horizontal stainless steel tank, most recently used as a beer flotation tank., Additional title: horizontal stainless steel tank, Volume: 42300 l, Operating pressure: 0,99 bar, Operating temperature: 20 °C, Material: stainless steel, Position: horizontal, Features: manhole
Vertical stainless steel tank with various fittings., Additional title: vertical tank, Volume: 3158 l, Max. permissible pressure: 0,5 bar, Max. permissible temperature: 110 °C, Material: stainless steel, Position: vertical, Base construction: cylindrical tank with flat heads
Kieselguhr dosing system for beverage filtration. Consisting of a mixing tank, pumps and various other components., Additional title: Dosing system comprising a mixing tank, pumps and other equipment, Capacity: 25000 l/h, Vessel volume: 500 l, Power: 2,42 kW, Voltage: 220/380 V, Frequency: 50 Hz, Material: stainless steel, Position: vertical, Features: agitator, sight glass, level indicator, precoat pump (80 hl/h against 2 bar), piston metering pump (36 hl/h against 8 bar), hinged lid, carbon dioxide fumigation, dust extraction device
Plant for kilning green malt. Hot air is generated at a steam-heated heat exchanger and passed through the kiln by means of a fan. It is possible to regulate the proportions of fresh and circulating air by means of flaps and a bypass. Control takes place by means of a control cabinet., Additional title: vertical vessel; year of manufacture approx. 2005, Kiln dry capacity: 200 Kg, Width: 1,1 m, Height: 3,2 m, Features: Ventilator (Pollrich Ventilatoren GmbH, 2004), air-shut-off valves (EBRO Armaturen GmbH), circular vessel with Optima strauber-sieve bottom (Steinhaus GmbH), insulated hot water vessel Control cabinet
Storage tanks with 2 torospherical heads. Fitted with bottom and side-wall cooling jackets. 2 tanks, each 83 hl total volume, with 2 x cooling jackets, Additional title: Vertical, coolable stainless steel tanks, Gross volume: 8300 l, Operating pressure: 0,9 bar, Operating temperature: 20 °C, Width: approx. 1800 mm, Height: approx. 4030 mm, Material: Stainless steel 1.4301, Position: vertical, Base construction: 4 x pipe feet, Features: bottom cooling jacket; side-wall cooling jacket; sampling valve; 2 x sight glass; side manway; CIP piping; outlet valve (butterfly valve); Contact thermometer; solenoid valve for glycol piping
Fermentation tank with two dished bottoms. - 4 tanks with 52 hl butto content each - 2 tanks with 79 hl gross capacity each, Additional title: vertical stainless steel tanks, Total volume: 7900 l storage tank 2 pcs., Operating pressure each: 0,9 bar, Operating temperature: 20 °C, Width: approx. 1400 mm, Height: approx. 4100 mm, Material: Stainless steel 1.4310, Position: vertical, Base construction: 4 x pipe feet, height-adjustable, Features: Side manway; CIP piping; outlet valve (butterfly valve)
Stainless steel brewing vessel as a wort kettle and whirlpool combination with an external boiler., Additional title: brew vessel from stainless steel, Total volume: 260 hl, Diameter approx.: 3 m , Diameter incl. insulation approx.: 3 m, Frame height: approx.: 2 m, Width: 3,4 m, Material: stainless steel 1.4301 (AISI 304), Base construction: on stainless steel pipe supports, ground pegged, Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting
Stainless steel tank with cladding, mounted on a transport frame., Additional title: Horizontal, cladded stainless steel tank, Capacity: 4000 l, Pressure: 0,99 bar, Length: 3,25 m, Width: 1,4 m, Weight: 600 kg, Material: stainless steel, Position: horzontal, Base construction: transport frame, Features: insulation, inlet DN 50, outlet DN 40
mobile kieselguhr filter from Velo, Additional title: with vertical filter elements; year of manufacture approx. 2005, Filter surface approx.: 5 m², Cos φ: 0,69, Rotational speed: 1656 1/min, Power: 0,55/0,66 kW, Current: 2,98/1,71 A, Voltage: 230/480 V, Frequency: 50/60 Hz, Length: 2,30 m, Width: 1,30 m, Height: 1,80 m, Weight: 1000 kg, Features: with receiving vessel, mixer, power unit and control
Turbo Air Wort aeration DN40 mounted on frame, mobile, Additional title: Turbo Air; year of manufacture appr. 2000, Length: 1,30 m, Width: 0,60 m, Height: 1,30 m, Weight: 150 kg, Operation / Control: semi-automatic with push buttons on the control box and Siemens TD 390 display, Material: stainless steel, Base construction: mobile on 2 castors (frame), Features: 2-component jet; Siemens control panel TD390
Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement), Crushing capacity: 6000 b/h, Current: 6,5 A, Voltage: 380 V, Frequency: 50 Hz, Length: 15220 mm, Width: 1300 mm, Height: 22600 mm, Weight: 700 kg, Base construction: on dome feet, Features: Fragment tub, noise protection box, slot for manual disposal of single bottles
Open stainless steel tank with a lid., Additional title: Open stainless steel vessel, Volume: 14500 l, Length: 2300 mm, Width: 2300 mm, Height: 4000 mm, Material: Stainless steel 1.4301, Position: Vertical, Base construction: 3 x feet, Features: Lid; access ladder; float valve
Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement. Hydraulic filter layer compression. Control of hydraulics from built-in electrical panel., Additional title: Kieselguhr and sheet filters as a combination design; years of construction 1979, Capacity approx.: 380 hl/h Combination filter - filtration area approx. 76 - 108m2 KG; 180 - 253m2 Sheet with beer filtration, Operating pressure: 8 bar , Power: 6 kW, Voltage: 220/380 V, Frequency: 50 Hz, Length: 10100 mm, Width: 1320 mm, Height: 1750 mm, Formats: Square filter elements, Operation / Control: Built-in control panel, Material: Stainless steel, Position: Horizontal, Base construction: Frame, Features: Filter plates; Filter frames; collection tray with removal screw; hydraulik filter plate compression; hose pump, Layer patterns: Vertical row arrangement
Vertical stainless steel tank with frame cooling and various fittings., Additional title: with cooling jacket, Capacity approx.: 2900 l, Width: 1,85 m, Height: 2 m, Weight: 400 kg, Material: Stainless steel 1.4301, Position: Vertical, Base construction: 3 x feet, Features: Cooling jacket (0,5 bar, 30 l); Tank outlet DN50
Vertical stainless steel tank with various connections., Additional title: Vertical stainless steel tank, Capacity: 5000 l, Width: 1,45 m, Height: 3,8 m, Weight: 350 kg, Material: Stainless steel, Position: vertical
Vertical stainless steel tank, most recently used as a CIP tank., Additional title: CIP tank; year of manufacture appr. 1995, Capacity: 7000 l, Width: 1,8 m, Height: 3,2 m, Weight: 350 kg, Material: Stainless steel, Position: Vertical, Base construction: 3 x feet, Features: Side manway; Level indicator; Outlet DN65
Vertical, insulated stainless steel tank. Most recently used as a CIP tank., Additional title: Vertical stainless steel tank with insulation; built around 2000, Capacity: 7000 l, Width: 2,2 m, Height: 3,1 m, Weight: 800 kg, Material: Stainless steel, Position: Vertical, Base construction: 3 x feet, Features: Side manway; insulation
Additional title: Vertical tank, Capacity: 5244 l, Max. allowable operating pressure: 5 bar, Operating temperature: 20 °C, Width: approx. 1600 mm, Height: approx. 3200 mm, Material: Stainless steel 1.4541, Position: vertical, Base construction: 3 x feet, Features: Manway; safety valve; CIP piping
Stationary sheet filter with quadratic filter elements in a row., Additional title: sterilisation filter, Capacity: 140 hl/h, Number of plates: 119 plates, Length: 7500 mm, Width: 1600 mm, Height: 2000 mm, Formats: Quadratic filter elements - 100 cm x 100 cm, Layer patterns: Vertical row arrangement of the filter elements
Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement., Capacity: 60 hl/h, No. of plates - KG Filter: 34 Plates , No. of frames - KG Filter: 35 filter frames, No. of plates - sheet filter: 150 Plates, Length: 6500 mm, Width: 1000 mm, Height: 1500 mm, Formats: Quadratic filter elements - 60 cm x 60 cm, Base construction: Frame, Features: Manual filter element compression , Periphery: Kieselguhr dosing unit with dosing pump, Layer patterns: Vertical filter elements in a row
Filter system constructed with horizontally stacked filter elements. Once filtration is completed the kieselguhr is expelled from the vessel by centrifugal force., Capacity: 140 hl/h, Vessel volume: 26 hl, Length: approx. 4000 mm, Width: approx. 2000 mm, Height: approx. 3500 mm, Material: Stainless steel1.4541 (vessel), Base construction: on feet, Features: Kieselguhr dosing vessel with dosing pump; pumps; fittings, measurement technology
Functioning yeast propagation consisting of 3 cylindrical tanks with jacket cooling. 1 tank is additionally equipped with a conical cooling and serves as a pure breeding tank for yeast production., Additional title: Yeast propagation plant with 3 coolable pressure tanks, Capacity: 32 hl, Pressure: 2 bar test pressure 2,6 bar, Width: 1,3 m, Height: 4 m, Weight: 500 kg, Position: vertical, Base construction: on 3 feet, Features: Operating yeast propagation system, every tank with cooling jacket,1 tank with additional cooling jacket for the cone, used as pure culture tank for yeast propagation , Periphery: After consultation we can equip the tank with the desired fittings.
consisting of: - SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m²) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station - Control cabinet with operating panel, Additional title: juice heating plant for pasteurization, Capacity: 10000 l/h, Perm. working overpressure: 16 bar test pressure 20,8 bar, Heat exchange surface: 21 m², Length: 5,6 m, Width: 2 m, Height: 2,4 m, Operation / Control: Control cabinet with operating buttons, Material: Stainless steel, Base construction: Frame, Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings
Cylindroconical 580 hl fermentation and storage tank - glycol cooling, 4 cooling zones (1 x cone, 3 x cylinder) - swivel cone - stainless steel - insulated - support skirt, Additional title: Outdoor tanks, Capacity: 58000 l, Operating pressure: 2 bar, Operating temperature: 20 °C, Cooling area: 29 m2 1 x cone cooling; 3 x side-wall cooling, Height: 10,68 m, Material: stainless steel, Position: vertical, Base construction: Short skirt support, Features: Tank cooling; swivel conus; insulation; frame; outlet DN100; CIP connection; 2 x temperature sensor; sample valve
Horizontal stainless steel pressure tank with a heating coil and various fittings., Additional title: horizontal pressure tank, Capacity: 15000 l, Operating pressure: 4 atm, Operating temperature: 20 °C, Material: Stainless steel, Position: horizontal, Features: Internal piping for heating; level indicator; CIP connection; thermometer; sampling valve
Sheet filter with square filter elements hanging vertically, arranged row. Hydraulic filter sheet press. Control of the hydraulics from the built-in electrical control panel., Additional title: Sterilisation filter with 100 sheets of 100 x 100 cm, Operating pressure: 8 bar, Number of plates: 100 pcs, Plate area: 1 m2, Length: 5,5 m, Width: 1,5 m, Height: 2,3 m, Operation / Control: Control cabinet with operating buttons, Material: Stainless steel, Base construction: Frame, Features: Hydraulic press; control panel
