subcategories
(3rd category level)
Manufacturer:
(Category: 706)
Labelling machine for neck, body and back labelling of glass bottles., Additional title: neck-, body- and back labeling, Capacity: 40000 Fl/h, Length: 2600 mm, Width: 2800 mm, Height: 2700 mm, Formats: various label tables 0.5L NRW, 0.33L Vichy, 0.33L Euro, Running direction: left -> right, Operation / Control: Simatic OP7-Panel, Krones KES 5, Position: free standing
Insulated, cylindroconical stainless steel tanks with three shell cooling zones and one cone cooling zone. Previously used as beer storage tanks., Additional title: vertical, coolable, insulated stainless steel tanks, Gross volume: 30200 l , Pressure capacity: 0,99 bar, Max. operating temperature: 40 °C, Cooling area: 14,45 m², Length: 2,83 m, Width: 2,83 m, Height: 7,86 m, Weight: 3150 kg, Material: stainless steel, Position: standing frame, Features: insulation, tank fittings
2 vertical stainless steel pressure tanks with various fittings. Each mounted on a base frame., Additional title: 2 x tanks, Volume: 1050 l, Max pressure: 3 bar, Temperature: 10 °C, Width: 1,2 m, Height: 1,9 m, Material: stainless steel, Position: horizontal, Base construction: on skirt, Features: 1 manhole and 2 connections on top, 1 side- and 1 bottom-outlet, 1 gas piping, 1 sampling point, All connections with fitting.
Two horizontal stainless steel tanks with various fittings., Volume: 20800 l, Operating pressure: 1 bar, Operating temperature: 20 °C, Material: Stainless steel, Position: horizontal
Bottling line for approx. 5000 bottles/h, Additional title: returnable glass bottle filling, years of construction 1990 - 2016, Capacity: 5000 bo/h, Formats: Eurobottle 0,5 l, Longneck 0,33 l , swing top 0,5 l, Position: free standing, Features: Unpacker (JOHA Diamant M1), bottle washer (Klinger, 2016, 7,000 bph, empty bottle inspector (Heuft Reflexx InLine IR, 2016, 8,000 bph) bottle filler and capper (Hormes), swing-top capper (AMS, 1997, 15 capping units, 6,000 bph) Labelling machine (Gernep, 2014, 9000 bph), packer (JOHA Diamant M1), crate washer, caustic settling tank
Two upright stainless steel tanks with flat cone., Additional title: vertical flatconical stainless steel tanks, Volume: 18140 l, Operating pressure: 0,5 bar, Operating temperature: 20 °C, Width: 2,9 m, Height: 4,15 m, Material: Stainless steel, Position: Vertical, Base construction: 4 support legs, cylindroconical, Features: CIP-noozle
Insulated and clad stainless steel tanks standing on upright frames, each with three frame cooling zones and one cone cooling zone., Additional title: outdoor tanks, Volume: 1700 hl, Operating pressure tank: 1 bar, Operating pressure cooling: 4 bar, Test pressure: 1 bar, Width: 3,8 m, Height: 18,1 m, Weight: 13 t, Material: Stainless steel 1.4301, Position: Vertical, Base construction: Skirt, Features: PT100, full and empty detection probe, 4 cooling zones (3 frames, 1 cone, 42 l, 42 l, 126 l, 35 l), safety valve
Concentrating plant for the juice industry. The plant dates back to 1977 and was rebuilt in 1992. It was extended and equipped with a new cooling tower circuit. The plant is designed for 6600 kg/h of cloudy apple juice. With a single-stage concentration, the juice is thickened from 12° to 25°Brix. Up to 71°Brix can be achieved in the second pass., Additional title: with aroma recovery, Input quantity apple juice: 6600 kg/h, Water evaporation: 4840 kg/h, Discharge quantity concentrated juice: 1760 kg/h, Steam consumption: 1685 kg/h, Length: 7,70 m, Width: 6,70 m
This filter system may only be used to filter preclarified products that have normal filterable properties in their composition., Max. filtration flow: 400 hl/h continuous, Permissible operating pressure: 6 bar, Permissible operating temperature: 105 °C, Volume: 1456 l, Current: 10 A, Voltage: 220 V, Water: cold water: min. 150 hl/h; hot water (max 65 °C): min. 150 hl/h, Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar, Weight: 3450 kg, Base construction: basic frame with control and measuring components and filter container; cleaning module, Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet
Vertical, coolable stainless steel tanks with various fittings., Additional title: stainless steel tanks with temperature control, Total capacity (gross): 90400 l, Material: stainless steel, Features: 3 fermenting tanks (1 x 554 hl, 2 x 175 hl), 1 yeast tank (37 hl) , own temperature control (Nerb)
Water treatment system consisting of: cation exchanger, reverse osmosis system, and pressure booster station, Additional title: Reverse osmosis system with cation exchanger and pressure booster station, Permeate capacity: 1100 l/h, Max. permissible pressure: 6 bar, Yield: 75 %, Salt retention: 98 %, Power: HD-pump 1,5 kW, 3,15 A, Frequency: 50 Hz, Length: approx. 2294 mm, Width: approx. 740 mm, Height: approx. 1220 mm, Weight: 200 kg, Features: Conductivity meter, fine filter, overpressure protection, high pressure pump, control unit, pressure booster station 2 salt dissolving and storage containers, 2 filter containers with nozzle rod and lower nozzle, central control valve with upper nozzle, control unit
6 horizontal stainless steel tanks with dished bottoms, side cooling zone, manhole, sampling tap and central outlet. The purchase of a partial quantity is possible., Additional title: stainless steel tanks with temperature control, Total capacity: 242900 l, Max. pressure 4 Tanks: 0,9 bar, Max. pressure 2 Tanks: 5 bar, Material: stainless steel, Position: vertical, Base construction: cylindrical tank with dished bottoms, placed on 4 square tube feet, Features: 4 storage tanks (approx. 445 hl), 2 pressure tanks (approx. 320 hl), shell manhole, 1 shell cooling zone, insulated with steel metal cladding , Periphery: own temperature control
- Vertical fermentation tank with a capacity of 152.60 hl. Insulated, clad and equipped with overflow spout, jacket cooling zone and sampling tap. - Vertical fermentation tank with a capacity of 161.27 hl. Equipped with overflow spout, jacket cooling zone, yeast plug, spray head and lighting fixture. - Horizontal pressure tank with a capacity of 155.00 hl and a pressure capacity of 4.4 bar. Insulated and equipped with cooling zone, thermometer, safety valve, pressure gauge, sampling tap, hose level indicator and 2 spray heads. - Mobile yeast tank with a capacity of 8.00 hl and jacket cooling. - Temperature control., Additional title: stainless steel tanks for wheat beer fermentation, Total capacity (gross): 46500 l, Features: 2 vertical tanks (1 x ca. 150 hl, 1 x ca. 160 hl), 1 horizontal tank (155 hl), 1 mobile yeast tube, own temperature control
Single-stage homogeniser, used for hop suspensions with a particle size of 1 µm. Integration into a higher-level control system is possible via signal exchange. The motor was controlled via an external FI., Additional title: high pressure homogenizing, Capacity range approx.: 1800 l/h, Pressure: 250 bar, Cellular particle size: 1 μm cellular particle, Length: ca. 2,2 m, Width: ca. 2,5 m, Height: ca. 1,9 m, Operation / Control: Integrated in a ProLeit process control, the motor was controlled by an external frequency converter., Features: CIP-able, SIP-able
Yeast cultivation with dampable wort sterilization tank designed for an operating pressure of 2 bar and a capacity of 2.47 hl, a second heatable and coolable wort sterilization tank designed for an operating pressure of 2 bar with a capacity of 12.7 hl, and a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar and jacket cooling in the lower third (without cone). All tanks are equipped with an agitator. Also includes a CIP tank. The plant is controlled via a Steinecker control cabinet (time-controlled). The tanks are also available individually, Additional title: with switch cabinet and CIP tank, Features: 2 tanks for wort sterilization with stirring unit (approx. 2,4 hl and approx. 12,7 hl), control cabinet, 1 cylindro-conical tank with stirrig unit, CIP system
This hot water tank is a vertical, insulated stainless steel tank with an and . The tank is also equipped with a ( / ) and is ideal for applications where hot water is required at a constant pressure. The tank has an outlet pipe, a hose level indicator, and a pressure gauge for pressure monitoring. The robust construction and high-quality materials ensure long-lasting and reliable use in industrial environments. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, insulated, heatable stainless steel tank, Gross volume: 2000 l, Height: 2100 mm, Material: Stainless steel 1.4404 (AISI 316 L) with insulating cladding made of 1.4301 (AISI 304), Base construction: standing on 4 feet, Features: Insulation (insulation thickness 50 mm); heating jacket; temperature control; pressure booster pump (Grundfos); outlet pipe; hose level indicat ...
5 fermentation and storage tanks (104 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap and central outlet. 1 white beer fermentation tank (81 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap, yeast chute and central outlet. 1 batching/flotation tank (122 hl) with flat conical base, frame and cone cooling zone, manhole, sampling tap and central outlet. The tanks are also available individually or in partial quantities., Additional title: 7 pcs. of vertical, coolable stainless steel tanks, Volume fermentation and storage tanks: 10474 l per piece, Volume wheat beer tank: 8071 l, Volume flotation tank: 12242 l, Material: stainless steel 1.4301, Position: standing on feet, Features: Flat conical bottom, frame and cone cooling zone, manhole, sampling tap, central spout, yeast chute
Complete vacuum evaporation system type SchoKo, with: -Expansion evaporater/vacuum tank -steam condensator -different pumps and fittings, Additional title: vacuum evaporation system, Knockout capacity: 13000 l, Volume of vacuum tank: 1471 l, Length: 2006 mm, Width: 2006 mm, Height: 2503 mm
two-component nozzle with sight glass for a wort cooling capacity of approx.130 hl/h completely assembled on stainless steel panel, Additional title: Dual-fluid nozzle for oxygenation of wort, Aeration at a wort cooling capacity of: 13000 l/h, Base construction: mounted on stainless steel panel, Features: air vent DN50, sterile air filter, air flow meter, pressure reducer, membrane valves, control cabinet
Manual operating biological lactic acid plant with 3 tanks in stainless steel as storage and dosing tanks, with all fittings, Additional title: 3-tank system with heating elements, aeration devices and temperature control, Volume and dimension per tank: 2000 l Diameter 1300 mm, cylindrical height 1500 mm, total height 2100 mm, Length: 4500 mm, Width: 1700 mm, Height: 2100 mm, Operation / Control: electrical box with buttons, switches and temperature controls, Material: stainless steel, Position: free standing, Base construction: standing tanks with lids, on pipe feet, Features: electric heating rods, temperature sensor, stand hose for content display, automatic gassing, ladder bracket, internal piping, control box
Wet spent grain conveyor - Housing with rectangular inlet chute - Wet spent grain bunker mounted at the inlet - Flushing water discharge connection - Mounted gear motor - Non-return flap with air connection, pressure gauge and ball access hatch., Additional title: Wet spent grain conveyor, Capacity approx.: 200 kg/min, Power: 4 kW, Current: 6,98 A, Voltage: 400 V, Frequency: 50 Hz, Material: Stainless steel 1.4301, Features: Spent grain bunker; non-return valve with compressed air connection, manometer and ball access hatch
Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - Insulated and clad - Stand frame, short - Cleaning air fitting with safety valve, Additional title: Refrigerated stainless steel tanks for outdoor installation, Capacity: 74480 l, Operating pressure: 0,9 bar, Width: 12,55 m, Height: 3,27 m, Material: Stainless steel, Position: vertical, Base construction: short supporting skirt, Features: Cooling: 1 x side wall cooling jacket; insulation; dearation and cleaning combination with safety valve; temperature measurement
Complete mixing tank system comprising three vertical pressure tanks, each with two cooling zones, frame insulation, a bottom-entry agitator and various fittings. One of the tanks is also equipped with a CO₂ gas injection unit and a pump for tangential feed. A pipe fence, pipe panel, control cabinet and various measurement and control equipment and pumps complete the system., Additional title: Insulated, coolable stainless steel pressure tanks as a mixing system with proce, Volume: 33000 l per tank, Max. pressure: 2 bar, Pump capacity: 28 m³/h, Operating temperature: 40 °C, Length: 2600 mm, Width: 2600 mm, Height: 8500 mm, Weight: 3900 kg, Operation / Control: Rush-Flow-Dosing: SPS-Typ = C7-633, HMI = ProTool, Material: stainless steel 1.4301, Position: free standing, Base construction: Cylindrical tank with dished ends and pipe feet on spherical caps, Features: 2 zone frame cooling, ...
PVPP filter - Filtrox CHF with: - Filter vessel - PVPP batch dosing vessel - CIP station for regeneration - Swing bend panel for system integration - all pumps, fittings and field instruments - Control cabinet with control panel, Additional title: Centrifugal horizontal filter, Filter capacity: 20000 l/h, Volume: 1620 l, Operating pressure: 6 bar, Operating temperature: 100 °C, Systemic volume: 1620 Liter, Width: 1,2 m, Height: 2,85 m, Weight: 2500 kg, Operation / Control: Manual system, mainly with pneumatic valves, operation take splace on the control cabinet panel, Material: stainless steel, Features: Filter vessel with horizontal filter elements, stack dosing container with agitator, CIP system for regeneration, control cabinet with control panel, pumps, fittings and sensors
Manufacturer: Arnold Holstein Consisting of: Packing press type H65: Capacity: 1,200 kg/h Efficiency up to 75% 24 press inserts (65 x 65 cm) 22 pressing cloths (100 x 100 cm) Dimensions: 2,330 x 840 x 2,060 mm Fruit conveyor Pasteurizer Profi PA SH: Capacity: 600 l/h 48 kW heated with gas Automatic temperature controller V4A Dimensions: 2,100 x 880 x 1,300 mm Bag-In-Box dosing machine Profi Capacity: 600 l/h including weighing unit bags with up to 10 l, Additional title: Juice bottling incl. fruit reception and processing, Capacity pasteurizing/filling: 600 l/h, Capacity press: 1200 kg/h, Power: 1,5 kW / 48 kW, Features: Fruit conveyor with water bath / shower and shredder, packing press type H65 - 1,200 kg/h, efficiency 75%, 22 pressing cloths, 2.33 x 0.84 x 2.06 m; pasteurizer Profi PA SH - 600 l/h, 48 kW, 2.1 x 0.88 x 1.3m; gas burner; automatic dosing unit - 600 l/h, incl. weighing u ...
consisting of: - Malt milll - Mash-/Wortkettle/Whirlpool - Lauter tun - Warmwater vessel - Wort cooler - Wort aeration - Siemens touch screen - 4 x Fermenting vessel - 8 x Storage tanks with shell cooling surface - Icewater vessel - mobile beer pump - Steam boiler - 2 Bottle-filler + 1 Can-filler by Fillmatic - bottle filler A. Gruber, Additional title: 5 hl-Brewery, with Grist Mill, Compact-Brewhouse, Fermenting vats, Storage tanks, Cast out wort: 500 l, Capacity wort cooler: 750 l/h, Wort cooling time: 40 min., Material: Brewing vessel, hotwater tank, fermenting and storage tanks in stainless steel, 1.4301, Base construction: Brewhouse compact unit on stainless steel frame, vertical Fermenting vats on feet, horizontal storage tanks on two layer in a stainless steel frame., Features: mobile grist mill, mash-/wortkettle, lauter tun, warm water tank, wort-cooling and aeration, 4 fermentin ...
The fully-automated carbonisation plant produces the CO2-amount of beer, beer mixing beverages, soft drinks, mineral water and wine in a continuous and high-precision way by precise controlled dosing of CO2., Capacity beer feed: 20000 l/h, Capacity degassed water: 10000 l/h, Capacity blended beer: 30000 l/h , CO2-supply: 8 barg, Power: 23 kW, Current: 50 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 6 bar, Length: 2790 mm, Width: 1250 mm, Height: 2440 mm, Weight: 500 kg, Operation / Control: fully automatic, electrical cabinet with control panel, Material: stainless steel, Features: Flange connection: Beer: DN80, degassed water: DN40, CO2: DN25, blended beer: DN65 Beer pump; carbonisation section; flow measurement; Anton Paar original wort, alcohol and CO2 measurement; pressure gauge; sampling taps; various other valves
5-vessel-brewhouse with additional whirlpool with a knockout capacity of 250 hl at 12° Plato. The brewhouse consists of a mash kettle, a mash decoction kettle, a lauter tun, a prerun vessel and a wort kettle with internal boiler. Furthermore, a classic whirlpool with wort cooling and wort aeration is installed. The brehouse is fully automated with the electronic process control brewmaxx V7 and on basis of the operation system Windows. The brewhouse is completely made in stainless steel, but installed beneath the old copper hoods. The prerun vessel is Outdoor-installation, the whirlpool is - like the other brewing vessels - installed in the brewhosue room beneath a copper hood., Additional title: Modern brewhouse made of stainless steel, copper-clad, Cast wort capacity: 25000 l, Operation / Control: Fully automatic with brewmaxx V7 process control system, Material: Stainless steel brewho ...
Can filling machine with single filling valve, mobile, on wheels. For semi-automatic filling of 5 liter cans with beer. Capacity: approx. 30 - 35 cans/h, Additional title: Filling machine for liquid foodstuffs into large containers, Capacity approx.: 50 cans/h, Height: 2,0 m, Formats: 5 liter cans, Operation / Control: semiautomatic, Material: stainless steel, Base construction: on wheels
Self-priming centrifugal pump with stainless steel housing., Additional title: self-priming centrifugal pump, Frequency: 1450 1/min, Power: 4,0 kW, Material: stainless steel, Features: stainless steel housing
