subcategories
(3rd category level)
Manufacturer:
(Category: 706)
Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data Manufacturer: KHS AG (Dortmund, Germany) Model: Innopro warmer-cooler Year of manufacture: 2006 (control cabinet 2007) Machine type: thermoregulator for heating or cooling wine, skid-mounted Product: wine Throughput: 9,900 l/h (99 hl/h) Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at ...
Overview This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skids own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data Manufacturer: KHS AG (Dortmund, Germany) Model: Corvus Year of manufacture: 2007 (filter housings 2006) Machine type: cartridge filtration system (microfiltration), skid-mounted Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each Housing design rat ...
Flow steam generator with 33 kw/h Capacity: 50 kg/h steamStrom / Volt: 400capacity / hour ca.: 50customs no.: 84022000
New Seegräber GmbH TD9 electric steam generator. Manufacturer: Seegräber GmbH, manufacturer article: 100-0001-0900.9.9 kW, steam output 15 kg/h, maximum steam pressure 2.5 bar.3/N/PE 400 V AC, 50 Hz, CEE 5-pole 16 A, fusing 16 A.Water: GeKa coupling, minimum 2.5 bar, steam outlet NW 25.760 × 345 × 690 mm, approx. 50 kg. Cable approx. 5 m.Standard version, accessories quoted separately. Price and delivery time on request.
Overview Tunnel pasteurizer for the continuous thermal treatment of filled cans and bottles by water spray. The tunnel is built in a U-shape: infeed and outfeed sit on the same end of the machine, so the line returns to the operator side and the footprint stays compact at 6.2 m² of working area. The treatment length is divided into eight zones – three heating zones, one pre-pasteurization zone, one pasteurization zone and three cooling zones – with energy recovery between the zones, so heat taken out of the cooling side is fed back into the heating side. Heating is by steam through a plate heat exchanger mounted on the side of the tunnel. Product enters at +10 °C, is held at +70 °C for 10 minutes in the pasteurization zone and leaves at +37 °C; the full cycle takes 41 minutes. Tunnel body and electrical cabinet are built entirely in AISI 304 stainless steel. Control is by Siemens ...
Overview This KOSME FLEXA 15/720 P3 MM is a rotary labelling machine for pre-cut labels, built in 2013. It carries two wet-glue labelling stations, and a third station adds hot-melt labelling, so one machine covers several labelling tasks. It suits bottlers who work with pre-cut labels and need to switch between different labelling jobs. Bottles enter and leave the labelling carousel via infeed and outfeed starwheels, guided through the carousel by container plates and top centring bells. Brush units and side pressing belts in the outfeed area press the labels on. The machine is fully enclosed by transparent safety doors and panels and is operated from a KOSME touch panel that shows machine and production data. The machine is set up with 4 formats, covering containers from 400 to 450 g/ml, and reaches an output of up to 15,000 bottles per hour. Technical data Manufacturer: KOSME Model: F ...
Overview This KOSME DEPACK B B1F A/67-Rf is a depalletizer for empty containers such as blown bottles, built in 2013. It takes containers delivered in several layers on pallets, removes them layer by layer and transfers them to the downstream machine in the line. It handles containers from 100 to 500 ml at up to 13,000 containers per hour. Full pallets run in on pallet chain conveyors, a gantry-type depalletizing head clears the layers and removes the tier sheets. The machine is enclosed by safety fencing with light curtains and access protection. It is controlled by a Siemens PLC from a separate control cabinet outside the machine and operated from a KOSME touch panel. The machine is format-dependent, with several formats set up. Technical data Manufacturer: KOSME Model: DEPACK B B1F A/67-Rf Year of manufacture: 2013 Machine type: depalletizer for empty containers Output: up to 13,000 c ...
Used AVE 16-16-4 filling line, still & sparkling water - 2 PET blowerTechnical Specifications & Performance DataThis used bottling line is configured for beverage production in 0.33L, 0.5L and 1.5L bottle formats. The AVE filling line, manufactured in 2008, is designed for spring water and flavored water. Its stated capacity reaches 6,000 bph for 0.5L bottles and 2,500 bph for 1.5L bottles.Production capacity: 6,000 bph for 0.5L bottlesProduction capacity: 2,500 bph for 1.5L bottlesCompatible formats: 0.33L, 0.5L and 1.5LFilling monoblock configuration: 16/16/4 rinser, filler and capperCap specification: 28mm plastic screw cap, PCO 1881 neck finishSMF Combi 200 blow molding machine: 2003, 700 kg, 3 x 380 V, 28 kW, 50 HzSMF Combi 400 blow molding machine: 2016Advanced Automation & Control SystemsThe line combines bottle forming, conveying, filling, capping, labeling and shrink wrapping eq ...
The system is used to automatically clean empty vessels / containers / bottles before the filling process by means of movable air nozzles (pure filters). The KOSME JET CLEAN G 16/960 1T UP turns the empty containers (overhead) and removes loose particles and impurities by blowing in filtered air via movable nozzles. The machine is used to remove loose deposits from the containers before they enter the filling system. Capacity: up to 6000 bottles/h Dimensions: 2500 x 2500 mm Machine weight: 1600 kg Connection: 3x400 V, N, 50 Hz Air pressure: 6 bar Water pressure: 3 bar
The depalletizer separates pallets, multi-layer containers (e.g. blown bottles / bottle blanks) into a transport container up to the next connected machine. Capacity: 13,000 b/h Control: Siemens Connection: 3x400 V, N, 50 Hz Protection class: IP 54 Power (electr.): 27 kW Current: 49 A Condition: well-maintained, fully functional Availability: from week 43 2026
Overview H&K (Holstein und Kappert) SVF 120-D rotary can filler, built in 1991, with 120 filling valves for can format 211/202. Rated output is approx. 80,000 cans per hour with standard 330 ml cans. The filler is supplied together with an Angelus 121 L can seamer from 1991, the rinser that ran with it, and the filler platform. It is controlled by a Siemens S7-400 PLC. The machine is already dismantled and ready for loading. Technical data Manufacturer: H&K (Holstein und Kappert) Model: SVF 120-D Year of manufacture: 1991 Machine type: rotary can filler Filling valves: 120 Can format: 211/202 Output: approx. 80,000 cans/h (330 ml) Power supply: 380 V, 50 Hz, 3/N Rated current: 24 A Control voltage: 24 V DC PLC: Siemens S7-400 (CPU 416-2) Scope of delivery Can filler SVF 120-D with 120 filling valves and can lift cylinders Can seamer: Angelus 121 L (202), year 1991 Can rinser operated tog ...
Overview This SMI SK 452 T is a shrink packer for PET bottles, built in 2002 by SMI (Italy). It collates bottles into pack formations, wraps them in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 30,000 bottles per hour. It handles 0.5 l, 0.75 l, 1.0 l and 1.5 l bottles in 3x2 packs and 0.5 l bottles in 4x3 packs, and has a pass-through mode for running bottles unpacked. The wrapping section is fully enclosed by safety guarding with viewing windows. The machine has been running as the shrink packer of a PET bottling line for water and is still installed and under power, so it can be inspected in production. Technical data Manufacturer: SMI (Italy) Model: SK 452 T Year of manufacture: 2002 Machine type: shrink packer for PET bottles with integrated heating tunnel Output: up to 30,000 bottles/hour Pack formats: 0.5 l (3x2 and 4x3), 0.75 l (3x2), 1. ...
Overview This Twin Pack handle applicator, built in 2002, applies carry handles to PET bottle multipacks. It comes from a mineral water packaging line of the same year with an output of 20,000 - 30,000 bottles per hour depending on format. The machine is still installed and under power and can be inspected on site. Technical data Manufacturer: Twin Pack Year of manufacture: 2002 Machine type: handle applicator for beverage multipacks Line output: 20,000 - 30,000 bottles/h depending on format Line formats: PET bottles 0.25 l, 0.33 l, 0.5 l, 0.75 l, 1.0 l and 1.5 l Control: Siemens text operator panel Equipment Handle application unit with tape reels on a blue steel frame above the pack conveyor Control panel with separate start, stop and reset for the front and rear sections, emergency stop Guarded enclosure with transparent doors Condition Still installed and under power. An inspection o ...
Cylindroconical 965 hl fermentation and storage tank - designed for cooling with ammonia (can also be cooled with glycol), 1 x cone cooling, 3 x frame cooling - Swivel cone - stainless steel - insulated - Stand frame, short - Cleaning air fitting with safety valve - Vacuum valve 5 tanks, also available individually or in partial quantities., Additional title: Outdoor tanks for storing fluids; years of manufacture 1988 - 1991, Capacity: 96450 l, Operating pressure: 2 bar, Length: approx. 12400 mm, Width: approx. 3950 mm, Height: approx. 3950 mm, Weight: 6220 kg, Material: Stainless steel 1.4301, Position: vertical, Base construction: short supporting skirt, Features: 7 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement
Used complete 10hl craft brewery lineTechnical Specifications & Performance DataThis complete 10 hl craft brewery and bottling line is built around a BBC INOX Essential 1000 steam-heated, two-vessel brewhouse. Designed for bottle-conditioned beer production, the plant combines brewing, fermentation, glycol cooling, gravity filling, labeling, crown capping, cold storage, cleaning and handling equipment in one integrated industrial packaging installation.Brew length: 10 hl / 1,000 L per brewBrewhouse: BBC INOX Essential 1000, two vessels, AISI 304 stainless steel, steam heatedHot liquor tank: 2,000 L AISI 304 tank with internal steam coilFermentation: 3 x 18 hl gross-volume cylindro-conical fermenters, approximately 15 hl working volume eachFilling system: six-head linear gravity bottle filler, 480 L/hBottle formats: compatible with 0.33L, 0.5L and 0.75L bottlesWort cooling: Kelvion plate ...
The system labels with two modules using the wet-glue process and can label with hot glue by means of a third additional module. Dimensions: approx. 3.80m x 3.00 m The labeller achieves an output of up to 15,000 bottles per hour. Condition: in operation, fully functional Machine dimensions (LxW): 3800 x 3000 mm Output: up to 15,000 bpm Viewing by arrangement
Bottling line, consisting of: 1. Depalletizer and Palletizer Manufacturer: Pack und Palettiertechnik Rudolf Steinle Gersthofen GmbH Type: RAPID-EK Year of Make: 1993 Air pressure: 6 bar Connection: 220/380 V, 50 Hz Control: 24 V DC 2. Unpacker Manufacturer: Radenska & Steinle (RS) Type: ARO-P3 Year of Make: 1995 Air pressure: 6 bar Connection: 380 V, 50 Hz Power: 3 kW 3. Crate washer Manufacturer: Radenska & Steinle (RS) Type: SPN-2S Year of Make: 1995 Connection: 380 V, 50 Hz Power: 8 kW 4. Bottle washing machine Manufacturer: Schymanski GmbH (MAG) Type: SIRIO 8-24 Year of construction 2000 Connection: 400 V, 50 Hz 5. Bottle inspector Manufacturer: miho Inspektionsysteme GmbH Type: DAVID Year of Make: 2002 Connection: 230 V, 50-60 Hz 6. Bottle filling line Bottle filler Manufacturer: KHS Type: VVF Bottle capping system Manuf ...
The Krones VarioFlash B is a highly efficient flash pasteurization system designed for the thermal treatment of products. It was developed specifically for the microbiologically safe filling of beer, beer-based mixed drinks, wine, and fruit juice spritzers. Performance range: The VarioFlash B was designed specifically for small breweries and is particularly well-suited for an output range of 18 to 45 hectoliters per hour. Compact design: The entire flash pasteurization system (in the compact version) is sized to fit inside a single container. This significantly simplifies transport, installation, and on-site commissioning. Gentle preservation: Equipped with dynamic PU (pasteurization unit) control and an adapted hot-water circuit, the beer is heated extremely gently ("express pasteurization") to optimally preserve its flavor. High energy efficiency: During production stop ...
Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data Manufacturer (line builder): Leifeld & Lemke Year of manufacture: 1990 (continuously upgraded since) Machine type: complete automatic KEG cleaning and filling line Capacity: up to 130 kegs/h at 30 L (seller-stated) Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery Empty-keg infeed with ce ...
Used Tetra Pak dual-mode pasteurizer, 10 ton - Year 2014Technical Specifications & Performance DataThe Tetra Therm Lacta pasteurizer is designed for continuous thermal treatment in dairy processing and beverage production. This industrial pasteurization system is configured for yogurt and pure milk applications, supporting controlled heat treatment before subsequent processing, filling, or packaging operations.Model: Tetra Therm LactaYear: 2014Production capacity: 10 tonnes/hHolding time: 285 seconds for yogurt pasteurizationPlate heat exchanger: Tetra PlexHeat exchanger design pressure: 10 BAR on both circuitsHeat exchanger design temperature: 150 °C on both circuitsHeat exchanger test pressure: 13 BAR on both circuitsAdvanced Automation & Control SystemsThe pasteurizer is built around a continuous thermal process in which product flow, heating and holding stages must operate in coordi ...
Overview This Haloila Octopus 1800 SFTS TWIN is an automatic rotary-ring stretch wrapper for palletised loads, built in 2008. It was built by Oy M. Haloila Ab and delivered under the ITW Mima Packaging Systems brand; the Octopus line is sold today under the Signode name. The machine is still installed, under power and running in production, and can be inspected in operation. The rotating ring carries the film carriages around the stationary pallet, so the load itself is never turned. In the TWIN configuration two film carriages run on the ring, which is what carries the output: up to 100 pallets per hour with standard overlap and 21 wraps. Euro pallets and half pallets are processed. A top sheet unit is installed, functional and in daily use. The machine has no automatic reel change (RCS). Technical data Manufacturer: Haloila Model: Octopus 1800 SFTS TWIN Year of manufacture: 2008 Machin ...
Used KRONES Gera Returnable Glass Bottling Line, 20000 BPHTechnical Specifications & Performance DataThis used bottling line is a complete returnable glass bottling line designed for handling bottles in crates, covering the process from crate preparation through filling, labeling, inspection, crate packing and palletizing. The line combines equipment from Krones, Kettner, Rink, Syscona, Matec, Falterbaum and Bohrer.Filler capacity: 20,000 bphFilling type: isobaric filling (counter-pressure) - ( Heineken-style)Premix capacity: 22,000 L/hContainer formats: 0.33L and 0.75L returnable glass bottlesPackaging configuration: bottles in cratesClosure type: plastic screw caps Labeling technology: wet-glue labeling with 2 aggregatesMain equipment years: 1996–2016Advanced Automation & Control SystemsThe line includes automated systems for crate sorting, crate decapping, bottle unloading, washing, ...
FBF 4022 HOMOGENIZER 3,500 LITRES/HOUR Manufacturer: FBF ITALIA Model: FBF 4022 Serial no.: 17124175 Year: 2017 Industrial high-pressure homogenizer Capacity: 3,500 l/h Maximum operation pressure: 180 bar Minimum feed pressure: 2 bar Electrical specifications: 22.3 kW/400 VAC/50 Hz/42 A/3PH+PE Overall dimensions: 1,400 x 1,150 x 1,200 mm (WxLxH) Weight: 850 kg CE Marking Includes user and maintenance manual in Spanish
Overview GEA Procomac Opera palletizing unit from 2009, sold as a complete end-of-line group: low-level infeed palletizer with all pallet conveyors, pallet magazine, mother pallet station, Robopac stretch wrapper and Logopak pallet labelling. The Opera is a low-level infeed palletizer for low to medium production capacities, with automatic changeover for different pallet patterns and pallet sizes. Still in production in Germany until October 2026. Technical data Year of manufacture: 2009 Design: low-level infeed palletizer Changeover: automatic, for different pallet patterns and pallet sizes Output range: low to medium production capacities Handled at the site: shrink-wrapped PET bottle packs Pallet handling: infeed and discharge pallet conveyors, pallet magazine, mother pallet station Machine guarding: mesh safety fencing with access gates around the cell Scope of delivery GEA Procomac ...
Homogeniser for oat milk, Additional title: High pressure pump , Performance: 5500 l/h, Max. pressure: 200 bar, Power: 45 kW, Length: 1050 mm, Width: 1600 mm, Height: 1400 mm, Weight: 2500 kg
Overview This Gernep Soluta 6-720 2SK SD is a rotary self-adhesive labelling machine built in 2023. It carries two self-adhesive labelling stations on a 720 mm container table with twelve servo-driven bottle plates, and runs at a rated output of 11,000 bottles per hour with an adjustable range of 2,000 to 12,000 bottles per hour. Containers are fed in through a single infeed worm and an eight-division star, held on servo-driven bottle plates while the labels are applied, and discharged through the same star pitch. Height adjustment is electric, the labelling stations and the bottle-plate drive are servo-controlled, and the machine is operated from a touch panel with a free-standing control cabinet. Broken-container detection is fitted, and a VPN router for remote maintenance is installed. Technical data Manufacturer: Gernep Model: Soluta 6-720 2SK SD Year of manufacture: 2023 Machine typ ...
Used Tetra Pak TBA19 125 slim 7500 PPH - Year 2009Technical Specifications & Performance DataTetra Pak TBA/19 TBA 12SS (RCI) filling machine configured for aseptic carton filling and integrated straw application. Built in 2009 and reconditioned in 2017, this equipment is designed for high-output industrial packaging operations where accurate filling and reliable downstream pack presentation are required.Manufacturer: Tetra PakModel: TBA/19 TBA 12SS (RCI) 030V Production speed: 7,500 packs/hFunctions: Filling and straw applicationManufacturing year: 2009Reconditioned: 2017Documentation: Manuals availableAdvanced Automation & Control SystemsThis filling and straw application machine is intended for automated carton packaging workflows. The integrated process combines carton filling with straw application, supporting continuous product handling and coordinated operation within an industrial ...
Complete PET bottling line for still and carbonated water, with a capacity of 14,400 bottles per hour for 0.5 L bottles.Technical DataCapacity: 14,400 bottles/hour for 0.5 L bottlesProducts: Still and carbonated waterContainers: PET bottlesBottle formats: 0.33 L, 0.5 L, 1.0 L, 1.5 L and 2.0 L, currently running 0.5 L bottlesLabelling: PE Roll-LineCap feeding system: Gravity 26Pack formats: Packs of 12 for 0.5 L and 1.0 L bottles Packs of 24 for 0.5 L bottles Packs of 6 for 1.5 L bottlesPallet formats: Euro pallets measuring 800 × 1,200 mm and Düsseldorf pallets measuring 800 × 600 mmCondition: Used lineVideo: youtu.be/XUEY0L49VJQMachines and Equipment1. PET blow moulding machine – Sidel SBO 8, year 2006Including preform tipper, preform hopper, elevator, orienter and feed chute2. Air conveyor – Lanfranchi, year 20063. Chiller – MTA, year 20264. Filling machine – SACMI Blu Star ...
Used OLMOS compact eco2 bottling line, pet & glassTechnical Specifications & Performance DataOlmos COMPACT 800 2 is an in-line labeling and capping machine designed for bottle handling in industrial packaging and beverage production environments. Its double-position inlet configuration supports continuous integration within a bottling line, combining labeling and capping operations in one machine.Manufacturer: OlmosModel: COMPACT 800 2Manufacturing year: 2012Bottle formats: compatible with 0.5L to 5.0L bottlesContainer materials: PET and GlassFunctions: in-line labeling and cappingMains voltage: 380V ACAdvanced Automation & Control SystemsThe machine is configured for in-line operation, allowing the labeling and capping stages to be incorporated into a coordinated bottle-handling process. The double-position inlet is intended to support controlled bottle entry and reliable transfer throu ...
Filler blocks from CIMEC Italy consist of rinser, filler and capper. Output 1000 bottles per hour. Loading and dispensing by hand on collection plate
