beverage machines used for sale (2,039)

Overview  This bottle unpacker was manufactured in 1982 by German company Joha. The machine was part of a bottling line operating at 2,500 bph and is immediately available. Technical data Capacity: Part of a line running at 2,500 bph Formats: Prepared for 0.33 L Longneck Unpacking head: Packing head for 24 bottles in a modular crate

Item No. Z-HF63-WH - 30 cm rack with 30 plates - As good as new device, built in 2022 - Total Trubraum approx. 249ltr. - Total filter area approx. 19.5m² - With electric hydraulic pump - without feed pump - Connection thread DN50 DIN 11851 - with monofilament cloths and end cloth - 1 year functional warranty

High-pressure injection system for your filler between filler outlet and infeed of the capping machine consisting essentially of: - High-pressure pump including frame - Heating system as well as valves - Nozzle unit - Electrical control cabinet - Pressure tank A technical description including pictures can be found in the attachment by an offer.

Strasbourg Labeling Service SES-120-II Hotmelt labeler for square and round containers, configured for 0.1 ltr, 0.25 ltr, and 0.5 ltr pocket bottles, etc., for square containers with 2 labels or for round containers with one label., Output up to 4,000 units per hour, worked until the end... ran only 10 times a year

Overview The filler and capper was originally built by the Stork company and was overhauled by the ROBAK company in 2018. The machine can be used to fill still beverages into glass bottles. The machine is in excellent condition, currently dismantled and stored in a well-maintained environment. Technical data  Capacity: 7.000 bph Filler is prepared for 700 ml bottles 31,5mm aluminum cap The machine is missing a cap aligner and a cap slide and feeder. These should be made for a specific cap

Overview This tray packer was manufactured in 2012 by the german manufacturer MEYPACK. It is already dismantled and stored in the BEVMAQ warehouses. The conveyor system is not included, the inlet and tray magazine are included. Technical data  type: VP500 year of manufacture: 2012 Total output: 20 cycles/min length 8000 mm | width 1600 mm | infeed and outfeed height: 1250 mm packaging data:  length: 100-300 mm width: 200-450 mm height: 60-350 mm height of tray edging: 40-100 mm pre-cut: length: 200-500 mm width: 290-600 mm power: 400V,N,PE | 10kW/33A |  air: 6-7 bar | 20 NL/cycle

Rinser AVE with 28 rinser stations 1-Kanla System Running direction: left - right with safety cladding Frequency-controlled

Overview The Kosme / Krones Barifill is an isobaric filler that is currently in operation in a German brewery and can be seen in operation. The machine was manufactured by Kosme in 2015 and installed in 2016. It has a maximum output of 8,000 bottles per hour and the rated speed of the manufacturer is 7,000 bph. The system is designed for 26 mm crown corks and has 30 filling stations. Technical details  Output: 8,000 bottles/hour (for 0.33-liter bottles) Type of closure: 26 mm crown cork Formats: 0,5 NRW 0,5 Longneck 0,5 Lochmund 0,33 ALE 0,33 SUD 0,33 Steinie Bügel Filling stations: 30 Electrical specifications: Max. Voltage: 3x400 V + N + GND 50Hz Power consumption: 13,00 kW Operating hours: 18393 (March 2025) Spare parts included: Drives Gearboxes Cardan Shaft others Serviced by Kosme/Krones each year Lifting cylinders in 2024 Valves and capper in 2025 Features: Bottle shower High pr ...

Overview  This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data  Capacity: 18,000 bottles per hour Label positions: Full bottle sleeve or partial bottom sleeve Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery  CLEVER Machines GS 4001 sleeving unit Shrink tunnel CLEVER Machines STJ 3

Empty Bottle Inspector Heuft InLine reflexx Release 9, Pre-sorting of the Heuft Spectrum SX TB 72 and the associated Gateway II (network connection) (output max. 72,000 bph; Built in 2009). The following types of bottles can currently be checked: • 0.33 l ale / green / KK • 0.33 l Ale / brown / KK • 0.50 l NRW / brown / KK • 0.50 l NRW / clear / SV • 0.50 l Euro / brown / KK • 0.33 l swing-top bottle / brown / embossing • 0.50 l swing-top bottle / brown The following checks are carried out: • Pre-sorting Heuft Spectrum SX TB 72: - Bottle shape - Bottle height • Empty bottle inspector Heuft InLine reflexx Release 9: - Sidewall inspection (inlet and outlet) - Muzzle inspection - Thread inspection - Soil inspection - Residual liquid (IR/HF) - Additional detection in the outlet for any sticking labels in the neck area - Test bottle detection T ...

Stainless steel tunnel pasteurizer - new Hermis type TP 20 capacity: 22.000 cph - 500 ml Product: beer Year of manufacturing: 2025 Treatment area: 74 m² Number of modules: 7 pcs Treatment length: 13.500 mm Total number of zones: 10 pcs Total width: 6.500 mm Total length incl. infeed / discharge conveyor: 15.000 mm Total number of zones: 10 pcs Heating system: Plate heat exchanger outside of the pasteurizer Steam pressure: 3 bar Electrical system: Siemens S 7 - 1200 The main conveyor of the pasteurizer is made of plastic - Movex - Italy Active transfer - Rexnord - Holland Plate heat exchanger in outside of pasteurizer - Funke - Germany Pumps, stainless steel - Lowara - Italy Spray Nozzles - Lechler - Germany Steam valve - Burket - Germany Air supply system - SMC - Germany Electro peumatic - Fest - Germany Electrical control - Klöckner / Möller or ...

REF-0 INVIA DCOM/3 DIATOMACEOUS EARTH FILTER Brand: InVIA Model: DCOM/3 Year: 2013 Mobile diatomaceous earth filter (kieselguhr filter) with manual backwash. Suitable for the initial filtration and clarification of wine, beer and liquid food products. All AISI 304 stainless steel. Filtering process through horizontal discs. Equipped with a built-in dosing system with electric pump and flowmeter. GAMAR diaphragm dosing pump (0.3 kW) EBARA recirculation pump (2.2 kW) Installed power: 2.5 kW Voltage: 400 V/50 Hz Filtering surface: 3 m2 Max. capacity: 8,000 l/h Max. pressure: 6 bar Operating temperature: 0 - 80 °C Overall dimensions (mm): 1,200 x 650 x 1,500 (LxWxH) Weight: approx. 210 kg

CIP system 3x10HL, new

CIP system 2x10HL, new

CIP system 3x15HL, new

KEG wash and fill, 20-30 KEG/h, automatic, new

KEG wash and fill, 7-10 KEG/h, manual, new

Manufacturer: Weightpack S.r.l., Goito (MN), Italy Model: WSFC 32/24/6 – 141 NH ESL Serial number: WL 0289 Year of manufacture: 2010 Type: Rotary filling line for high-hygiene dairy products Version: ESL – Extended Shelf Life 32 sterilization stations 24 filling stations Capacity: Sterilisation of containers using H₂O₂ Precise volumetric or gravimetric filling technology Max. 12,000 l/h for 1-litre format (see photo above) -> in practice, we produced at 7,000 l/h

Overview This Krones Linapac A-T-1600 automatic bottle unpacker was manufactured in 1998 and was previously installed in a returnable glass beer bottling line. The machine is designed to automatically remove empty bottles from beverage crates and transfer them onto the bottle conveyor system for further processing. The unpacker was operated in a production line with a capacity of approximately 33,000 bottles per hour, making it suitable for high-capacity returnable glass operations. Machines of the LINAPAC series are widely used in the beverage industry due to their robust design and reliable crate handling. The machine is currently out of production but complete, electrical disconnected, and available for inspection. Documentation and CE conformity are available. Technical Data Manufacturer: Krones / Linapac Model: A-T-1600 Machine type: Automatic bottle unpacker Year of manufacture: 19 ...

Bottle washing machine O + H Contina type E44C / 302-110 year of manufacturing: 1995 capacity approx. 30.000 bph incl. Siemens S7 PLC control system incl. HMI touch panel incl. fully automatic bottle transport system incl. integrated safety systems and emergency stop incl. electrical control cabinet The machine is made of stainless steel and it is suitabble for returnable glass bottles. The machine is still in production until November 2026 in Germany.

Overview  This atmospheric filler was manufactured by Borelli in 2016 and is in good and well-maintained condition. The machine is still installed and can be viewed and tested in person at any time. Technical details  Filling valves: 10 Filling principle: Atmospheric Bottle formats: 0.33L (0.75L possible if with 26mm crown cap) Closure: 26mm crown cap Output: 1,500 bottles/hour

The brewing system has a 470 L wort kettle and a 500 L lauter tun. The heating is electric with 21 kW heating power. The heating is in the walls and floor ordered. The brewhouse yield is max. 74%. The original gravity can be brewed up to 18 degrees Plato . Two-vessel brewhouse, consisting of a mash tun/wort kettle combination and a lauter tun/whirlpool vessel. Under the mash tun is a highly efficient pump with which the wort is mixed and passed between the devices by means of hoses. can be transported here. recipe management, automatic mashing program, timer function and manual Operating modes are operated via a control system, which has a 7-inch touch display. The built-in plate heat exchanger for re-pouring preparation makes it possible to use tap water directly to the required temperature and by means of nozzles in the lid of the lauter tun directly and gently. No addition ...

Overview This brewing facility, with equipment from 2018 - 2020, is becoming available as brewing operations will cease in the summer. The machines are still in operation and will be available from 01.05.2024. This offer consists of a malt mill (Maltman), brewhouse (Speidel), fermentation and storage tanks (Speidel), a bottle filler (Rizzolio) with labeling (ENOS) as well as accessories for the operation of the brewery. Scope Brew house | Braumeister | 500l | 2019 3x Pressure Tank | Speidel BBT | 1.2 bar 625l | 2018 – 2020 1x Pressure Tank | Speidel BBT | 2.5 bar 625l | 2021 4x Fermentation and storage tanks | Speidel BBT | 625l | 2018 Counter pressure filler | Rizzolio | RLV 4-4-2 | 2019 Cooler with 100l buffer tank and automation | Energytech/ Onnline | 2019 Labeller | Enos Euro | Compatta | 2020 Mill | Maltman | MM-150SP | 2018 Density meter | Anton Paar | DMA35 | 2019 Plate heat ex ...

Save energy and water, Efficient surface drying, Compact, powerful drying system, particularly energy efficient, Optional: with tunnel system, Areas of application:, • Water carryover, • Bottle neck drying, • Blowing off crown caps / flip-top bottles, • Can level blow-off, • Coding area drying, • Blow off dust, • Blowing off residual water for camera-supported control, Compact design in different versions:, • Band attachment (approx. 500 x 500 mm), • Rack mount, • Wall mount, Technical specifications:, • Max. power consumption 1,300 watts, • 230V connection, • Infinitely variable, • Ambient temperature 0-50°, • Storage temperature –40 to +85°, • 220 m3/hour or 3,666l/minute, • Overheating/overvoltage protection, Suitable e.g. for:, • Bottles, • Cans, • Beverage carton packaging, • Glasses, • Bowls, mugs, • Vacuum packaging

Capsule applicator and shrinker, make Enos, type Capsulatrice 1T., year 2015, for closing PVC capsules, with protective covering according to CE regulations, made of AISI 304 stainless steel,, Capacity: up to 2,500 bottles with PVC capsules,, up to 1,700 bottles for capsules made of aluminium, tinfoil, polyamine, This machine can be used for bottles of the formats:, Hmin= 230mm; Hmax= 370mm;, diameter min= 60mm; max= 110mm., Suitable shrink capsules should be made of PVC with dimensions:, Hmin= 35mm; Hmax= 70mm;, diameter min= 20mm; max= 40mm., The dimensions of the capsules used so far were:, H= 40mm; Diameter 32.5mm, The machine was used for the following bottle diameters:, 42mm; 52mm; 65mm and for a square bottle with LxW 45x45 mm., All moldings for these formats are for sale. Operating instructions are available., power: up to 2,500 bottles / hour, Dimensions / weight: L x W x H: app ...

Dosing device for liquid nitrogen, manufacturer Terboven, type LIN-Master-SCT, year 2018, to increase the pressure of bottles / cans filled with non-carbonated beverages,, for displacement of oxygen in the headspace of filled bottles / cans, glasses., electr. operation of the valve to release the dosage,, up to 28,000 containers / h are possible (depending on the dosing time), The device is installed in such a way that the liquid nitrogen outlet of the dosing device is centered over the container. This ensures that the full cross-section of the opening can be used., Different signal detections determine the exact position of each individual container and give a corresponding release signal to the dosing head., In order to keep the outlet area dry and free of ice, there is a continuous flushing with gaseous nitrogen.

Micro-blower instead of compressed air-driven nozzles, e.g., for installation in front of the inkjet coder for drying the coding area, all-aluminum housing, IP67 protection rating, integrated electronics, power consumption: max. 190 watts, compact, quiet (55 dB(A)) and efficient, flow rate at 43,000 rpm: min. 160 l/min, pressure: 119 mbar, optional power supply., This small and quiet 24-volt fan, IP67 rated, delivers incredible performance. See for yourself!, - Energy savings of up to 90% compared to compressed air applications, - Easy installation, - Only about 70 decibels, - Can also be used as a vacuum blower, Power consumption: max. 190 watts

Overview  This glass bottle depalletizer was manufactured in 2006 by Italian company MAS PACK. The machine is currently in production until end of July 2026 and forms part of a wine bottling line. Visits are possible on request. The machine is well maintained. Technical data  Capacity: Up to 7,200 bph Application: Glass bottles Formats: 37.5 cl Bourgogne 75 cl Bourgogne 1.5 L Magnum Power supply: 5 kW Air supply: 150 L/min

Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously operated in a returnable glass production line. The machine is designed as a head machine with parallel bottle infeed and discharge and is suitable for high-speed labelling applications. The system is equipped with two labelling aggregates: one for neck and front labels and one for back labels. The neck label is applied using hot glue for closure sealing, while the remaining labels are applied using cold glue. The machine is fitted with two glue pumps and includes one spare hot glue unit. The back labelling station is disengageable, while the front station is permanently installed. With 36 bottle plates and a production capacity of up to 33,000 bottles per hour, the machine is suitable for demanding returnable glass operations. The machine has accumulated approximately 44,350 operating hours as of ...

Overview  This fill level and closure inspection unit was manufactured in 2014 by the German company Krones AG. The Krones Checkmat 731 was used for overfill and underfill detection based on high-frequency (HF) measurement as well as closure control for metal caps via sensor technology integrated into the filler. The system was recently dismantled in full working condition after being replaced by a newer camera-based inspection system. All peripheral components such as trigger light barriers, encoder, and pusher were properly disconnected and are included in the delivery. Technical data Inspection functions: Overfill and underfill detection using HF (high-frequency) method Closure control via integrated sensor for metal caps (mounted in filler) Condition: Excellent, fully functional before dismantling Status: Dismantled and stored, ready for shipment Application: Bottling lines for beve ...