subcategories
(3rd category level)
Manufacturer:
(Category: 110)
Changing gear set according to pictures Auction-ID: A1-47017-75
LORENZ bell cutting wheels for roller sprockets, 019 W992370 + 019 W992360 019 W405750 + 019 W405750 4 pieces = 1 set Auction-ID: A1-47017-99
Changing gear set according to pictures Auction-ID: A1-47017-77
Air Operated Diaphragm Pump Type/s DL15-PM-TTT Technical data: - Connection Size Medium - 1/2\" BSPT Female Thread - Material housing - PP polypropylene - Middle part - PP polypropylene - Material diaphragm - PTFE - Material O-rings - PTFE - Material check valves -PTFE - Flow rate max. - 2.2 m³/ h - Medium pressure max. - 7 bar - Compressed air supply - up to 7 bar - Solid size max. - 2.5 mm - Dry suction max. - 2.5 m - Dimensions WxHXD - 212 x 265 X 200 mm - Net weight - 3.5 kg PTFE membrane for the highest chemical demands, very good resistance against aggressive media and chemicals, temperature range: -5 °C – +130°C. PP polypropylene housing has high resistance to acids, inorganic acids and bases. Also available as electric conductive housing material available. Temperature range: 0°C – +60°C Auction-ID: A1-47017-54
Changing gear set according to pictures Interchangeable wheels - number of teeth: Z 20 / 30 / 30 / 35 /40 / 40 / 40 / 45 / 45 / 50 / 50 / 50 / 50 / 55 / 60 / 60 / 60 / 65 / 65 / 70 R / 70 R / 70 / 75 / 75 / 80 / 80 Auction-ID: A1-47017-61
3-jaw chuck, outer Ø= 110, inner Ø= 25 mm, with mounting pin incl. Clamping jaws Auction-ID: A1-47017-89
LORENZ Disc Cutting Wheel HM: HB10 - F Z2/Z0= 15/60 14 - 44C 46 711/1 MN3.08 AN21° Z60 Auction-ID: A1-47017-95
Filter cartridge/3-5μm 340 x 450 mm - H 34 2240/40 KIT MANN FILTER Oil Filter Element Mann Filter filter element for oil with the highest quality for the Erosion, die-sinking EDM and spark erosion drilling. The Mann + Hummel Oil Filter Element H 34 2240/40 KIT reliably removes Dirt and solid particles such as dust, metal abrasion, oil, coal, soot, etc. It offers optimal protection and is used for filtration of engine, hydraulic and transmission oil . Technical data Height: 450 mm Outer diameter: 340 mm Auction-ID: A1-47017-40
Siemens 1 GG 5162-0KM46-6HU1-Z shunt motor, see nameplate used, normal signs of use, scope of delivery according to photos, Auction-ID: A1-47017-42
Tschuldin HTG 22 Probe 380 x 340 x 220 Auction-ID: A1-47017-100
Interchangeable gears/gears This 32-piece steel interchangeable wheel set consists of: Gears with the number of teeth from 20 - 149 Auction-ID: A1-47017-28
Various disc cutting wheels for oblique tempering from Lorenz. Technical details can be seen in the photos. 9 pieces in a set Auction-ID: A1-47017-97
Colchester Master 2500 lathe incl. clamp chuck Auction-ID: A7-47048-55
Product information \"Henninger Schnellauf - Milling Spindle Type 801 \" However, the Henninger quick-opening milling spindles are not highly sensitive devices. They are suitable for everyday production The Henninger quick-opening milling spindles are not only used with carbide milling cutters or when processing non-ferrous metals, but also for processing steel and casting. Even if the machines reach the required speeds, , people like to use the high-speed milling spindle to clean the machines. and to prevent dimensional deviations due to heating of the headstock. - Type: Quick-run - Milling spindle type 801 - Tool holder SK 40 - Tool holder collets: yes - Collet range: Ø 2 - 16 mm - Gear ratio: 1:6 - Maximum speed ED 70%: 6,000 1/min Auction-ID: A1-47017-93
offered : 2 pieces of pusher spindle for Lorenz gear slotting machines type LS 630 to LS 1250 1 refurbished new 1 needs to be overhauled. Auction-ID: A1-47017-18
Mitutoyo, FN 905 S 3D Measuring Machine Auction-ID: A7-47048-39
Interchangeable Wheel Set for Rice Cutter UL 1800, , in wooden box Auction-ID: A1-47017-7
Easy Marker / Richter EM 100 Nailer Auction-ID: A7-47048-76
Accessories for Leadwell LTC-50CL CNC Lathe Shelf content, without shelf Auction-ID: A7-47048-6
This machine is set up for pushing and pulling forehead and helical wheels according to the rolling process. By means of a special device, gears can also be produced using the hand-cut process. Normally, cutting wheels with approx. 4\" = 100 m/m pitch circle diameter . Since the machine works according to the rolling process, only a cutting wheel of a certain module, all the number of teeth can be cut. Dimensions for external gearing: - Largest wheel diameter for Strin wheels: 1000 mm - Largest wheel diameter for helical wheels: 750 mm - Largest tooth width: 160 mm Dimensions for internal gearing: - Largest wheel diameter for Strin wheels: 750 mm - Largest wheel diameter for helical wheels: 750 mm - Largest tooth width: 130 mm - Largest pitch to be planed in steel: 8.5/8.6 module - Hole of the table spindle : 160 mm - Number of ram strokes: 6 - Number of cut ...
Interchangeable gear set for KOEPFER / Wahli. Interchangeable wheels - number of teeth: Z 24 / 25 / 26 / 27 / 29 / 30 / 31 / 32 / 33 / 34 / 35 / 36 / 37 / 38 / 39 / 40 / 41 /42 / 43 / 44 / 45 / 46 / 48 / 49 / 51 / 52 / 53 / 54 / 60 / 61 / 69 / 70 / 80 / 82 / 83 / 85 / 86 / 87 / 88 / 90 / 91 / 92 / 93 / 94 / 96 / 98 / 99 / 100 / 102 / 105 / 108 / 111 / 114 Auction-ID: A1-47017-56
Product information \"Henninger Schnellauf - Milling Spindle Type 814 \" However, the Henninger quick-opening milling spindles are not highly sensitive devices. They are suitable for everyday production The Henninger quick-opening milling spindles are not only used with carbide milling cutters or when processing non-ferrous metals, but also for processing steel and casting. Even if the machines reach the required speeds, , people like to use the high-speed milling spindle to clean the machines. and to prevent dimensional deviations due to heating of the headstock. - Type: Quick-run - Milling spindle type 814 - Tool holder SK 40 - Tool holder collets: yes - Collet range: Ø 4 - 25 mm - Gear ratio: 1:6 - Maximum speed ED 10%: 12,000 1/min - Maximum speed ED 80%: 10,000 1/min Auction-ID: A1-47017-92
Workbench with tools for Mori Seiki SL 300 BMC / 700 Auction-ID: A7-47048-13
Accessories and tools for Mori Seiki SL 15 Auction-ID: A7-47048-70
\"Tailstock Bison Type 5819-170-200\" Tailstock Bison Type 5819, with adjustable tip height - Suitable for use with bison dividing heads and rotary tables - Precise adjustment of the height from 170-200 mm possible Auction-ID: A1-47017-30
Accessories for Mori Seiki NL 2000/500 Auction-ID: A7-47048-67
200 € 
