Manufacturer:
(Category: 105)
Auction-ID: A1-43571-222
With 5 m long tube inlet, and 5m long outlet Auction-ID: A1-43571-82
Auction-ID: A1-43330-211
with three-phase motor - 3 phase: 400- 6.4 A Auction-ID: A1-43317-7
Included: 1 x battery and chargers Auction-ID: A1-43317-60
1 BOSCH GTA 2600 Base Auction-ID: A1-43317-8
Round materials: approx. 260–320 mm; square material: approx. 250–300 mm; infinitely adjustable cutting speed; Hydraulic lowering control Auction-ID: A1-43331-5
Rodia saw table -full stainless steel container -saw blade 350mm currently there is one for concrete -saw table fully checked has new capacitor on it -only the water pump is not present but can be ordered as soon as possible Auction-ID: A3-40482-22160
Rodia saw table - equipped with stainless steel water bowl -saw blade 350mm blade for ceramic cutting of carat -fully checked and has new capacitor Auction-ID: A3-40482-22161
Rurack VS300HA Semi-Automatic Circular Saw Machine Range up to 40mm Max. saw blade diameter 300mm 2 cutting speeds Features: Pneumatic Material Clamp Automatic power supply 380V connection Coolant reservoir with pump Control box with emergency stop Rubber feet for stand In working order. Auction-ID: A1-41984-21
Carat saw table - 350mm blade for tiles (can cut tiles up to 1m) -fully checked new capacitor and cabling Auction-ID: A3-40482-22167
Auction-ID: A3-40481-18214
Auction-ID: A7-43098-12
Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-42662-121
Technical data Manufacturer: JAESPA Model: GBS-110 Machine Type: Vertical Band Saw Machine Year of Make: 2008 Roll diameter: 1100 mm Projection: 1070 mm Cutting height: 1700 mm Saw blade: 41 × 1.3 × 9900 mm (diamond, sprinkled) Belt speed: 250 – 1250 m/min Saw motor: 18.5 kW Connected load: 24.1 kW Mains voltage: 400 V Machine weight: approx. 10,000 kg Configuration Material support height: 1600 mm (without pit) / 900 mm (with pit) Table bridge: 1000 × 2600 mm Feeding table: 3000 × 1600 mm Feed: hydraulic, 10 – 800 mm/min Equipment: incl. conveyor technology and housing Note: The machine was used for graphite processing. Cleaning and technical inspection is recommended. Auction-ID: A7-40659-6
Auction-ID: A7-43646-123
Auction-ID: A1-43011-11
Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-42662-216
Auction-ID: A7-43646-89
Auction-ID: A1-43011-129
Sale due to discontinuation of business. In excellent working condition, with a roller conveyor of 2 meters. • This is not a small hand-held chop saw, but a commercial chop saw with foot and pneumatic control — intended for longer profiles and series cutting.  • The Ø 400 mm saw blades and ±45° mitre adjustment range make it suitable for profiles and frames that need to be cut at angles.  • The machine typically has pneumatic clamps for secure and secure positioning of workpieces during cutting.  Capacity in mm (indication) • Saw blade Ø: ± 400 mm • Max. square cutting capacity: ~133 × 133 mm (51/4\" × 51/4\") • Mitre angle: 0–45° L/R See attached photos. Auction-ID: A3-40481-7835
20004659; Table dimensions 1080 (1800) x 750mm Auction-ID: A7-43387-90
Machine type: Mitre saw Brand: Elu Design: Heavy industrial version, full metal construction Housing: Solid cast housing (low vibration, high stability) Engine / Power Motor type: three-phase motor Voltage: 220/380 V Power: 2000 W / 2.7 HP Rated speed: 2800 rpm Features / Features Saw table: Rotatable for mitre cuts Saw arm: Robust design with protective cover Application: Solid wood, panel material, construction timber Condition / Miscellaneous Condition: Signs of wear due to age, dusty Completeness: Complete Assembly: Stationary use, currently mounted on pallets for transport Auction-ID: 03Z-3W1-4
Design: Horizontal hacksaw in classic workshop design Frame: Solid Steel Cast Frame/Cast Construction Drive: Belt drive via multi-stage pulley system Cutting speeds: Several speeds can be adjusted by folding the straps Application: Cutting steel, non-ferrous metals and profile material Machine stand: Stable stand with integrated clamping device for secure workpiece fixation Operation: Manual control levers, adjustable cutting pressure and material tension Condition: Used, signs of wear due to age, mechanically functional Electrics: Plug missing – must be replaced Auction-ID: 03Z-3WE-4
MAC SPECIAL 400S Controlled Descent Band Saw• Motor: 1.5 / 1.8 kW – 3 Ph 380 V• Cutting speed: 36 / 72 m/min• Blade dimensions: 3727 × 27 × 0.9 mm• Cutting capacity: 280 × 220 mm at 0°, 220 × 200 mm at +45°, 140 × 100 mm at +60°• Max. opening vice: 285 mm• Adjustable hydraulic lowering• Dimensions: 700 × 1730 × 1810 mm• Weight: 370 kg• Serial number: 60987• Year: 2003 Auction-ID: A1-43483-5
Surplex GmbH
30 € 