Manufacturer:
(Category: 101-1)
Key data: 630 mm, 1100 mm, 600 mm
Clamping area: Ø700 x 500 mm Rapid traverse X/Y/Z: 60/60/56 m/min Milling spindle Max. spindle speed: 18,000 rpm SK-40 Other equipment Air on the workpiece Cooling by the spindle, 70 bar Renishaw RMP 600 Probe F) Tool tip control 5-axis simultaneous machining Tool radius compensation – 5-axis simultaneous Drilling cycle with torque-dependent chip breaking G00 slope constant Synch. Threading Cylinder interpolation EIA Dynamic Compensation 2 (included 1) KNOLL Coolant System KF200/1250 Paper Belt Filter 70 bar high-pressure pumoe KNOLL Chip Conveyor 640-S-1
x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmcontrol: Sinumerik 840 D SL SiemensMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWtool taper: SK 40 DIN 69871max. Torque: 83 / 57 Nmtension force: 8 kNwork table:: table surface area: 790 x 560 mmnumber of T-slots: 4 + 1 T-slot - distance: 100 mmT-slot - width: 4x 14H12 / 1x 14H7 mmmax. table load: 600 kgtable height over floor: 720 mmdistance spindle nose and table: 120 - 580 mmTool-Presetter:: number of toolpositions: 30 pos.Max. mould width: 80 / (130) mmmax. tool length: 250 mmmax. tool weight: 6 kgmax. total weight: 80 kgchange-time tool to tool: 1,6 secchange-time chip to chip: 6,0 secfeeds:: rapid traverse: 30 m/minfeed speeds: 1 - 20.000 mm/minFeed force: max. 5 kNtotal power requirement: 28 kVAweight of the machine ca.: 3,8 tdimensions of the machine ca.: 3,5 x 4,0 ...
x-travel: 400 mmy-travel: 400 mmz-travel: 375 mmtotal power requirement: --- kWweight of the machine ca.: 7,6 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1100 mmy-travel: 610 mmz-travel: 610 mmcontrol: Heidenhain 530 total power requirement: kWweight of the machine ca.: 7800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical machining center Travel x/ y/ z = 1020/ 600/ 500 mm Table size 1250 x 600 mm max. workpiece weight 800 kg Tool magazine 32 Tool positions HSK 63 Rapid traverse 70 m/min CNC control Heidenhain iTNC 530 Chip conveyor Coolant system
x-travel: 1.250 mmy-travel: 1.000 mmz-travel: 1.000 mmControl: MillPlus B - axis: -30 - +180 °tool taper: HSK 100 spindle turning speed - stepless: 20 - 10.000 U/minpower capacity at 100 % load: 25,00 kWpower capacity at 40 % load: 38,00 KWmax. torque at 40% / 100% load: 288 / 187 Nmfeed X/Y/Z/-axis: 20 - 10.000 mm/minrapid traverse X/Y/Z: 60,00 m/mintable surface area: Ø 1.100 mmtable load: 1,50 ttoolpiece magazine: chain magazine: 120 Stücktool diameter: 110 mmtool diameter with 2 vacant positions: 230 mmtool length - max.: 500 mmweight of tools max.: 30,00 kgrotary table speeds infinitely variable: 10 - 500 U/mintotal power requirement: 85,00 kWweight of the machine ca.: 25,00 tdimensions of the machine ca.: 9,50 x 8,50 x H3,50m m5-axis turning/milling machining center withMillPlus IT FD control, dual pallet changer,coolant system, coolant through the spindle,chip conveyor, rotatin ...
Key data: 750 mm, 600 mm, 520 mm
Universal machining center Spindle speed up to 18,000 1/min; Rapid traverse 50 m/min; Tool magazine 32 tool positions HSK 63; Swivel table - table size 700 x 500 mm; Table load 350 kg; CNC control Heidenhain TNC 530; Chip conveyor; Coolant system
x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 440 mm, 280 mm, 315 mm
CNC Machining Center MATRA KIRA KN40VS – FANUC 21-M Specifications (KN40VS) Machine Type: 2-Pallet Machining Center Control: FANUC 21-M Travel: X 440 mm / Y 280 mm / Z 315 mm Pallet size: 500 × 300 mm Tool changer: 12-speed Spindle speed: 200–4,500 rpm Drive power spindle: 7.5 kW Equipment / Condition Pallet changer (2-fold) Machine used, inspection/test run possible by arrangement
x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General Manufacturer: Spinner Type: U5-1520 Year of Make: 2012 Control: Heidenhain TNC 620 Travel X/Y/Z: X 1,520 mm Y 520 mm Z 460 mm Travel C-axis: 360° B-axis travel: -5°(-50°)/+130° Rapid traverse: 48 m/min Spindle Spindle speed: 12,000 rpm Tool changer: 32-fold Work table Table load: Max. 300 kg Table dimensions: 720×540 mm Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Portable Handwheel HR410 TNC620 Option "Software option 2" TNC620 Option "Software option 3" Glass scales in X/Y/Z Preparation for high-pressure flushing Preparation of the interface for Blum infrared probes
x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
5 Axle BAZ DMG DMU 50 evo BJ 2000 more technical data and more pictures on request
x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
5 axle BAZ Chiron FZ 12 KS BJ 2003 more technical data and more pictures on request,
x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2 x poles BAZ Manufacturer: DMG Type: DMP 60s BJ: 2004 and 2003
x-travel: 1.600 mmy-travel: 1.250 mmz-travel: 1.000 mmsize of pallet: 1.000 x 1.250 mmcontrol: SIN840D power capacity at 40 % load: 38,00 KWspindle turning speed - stepless: 20 - 10.000 U/minpower capacity at 100 % load: 25,00 kWmax. torque at 40% / 100% load: 288 / 187 Nmtool taper: SK50 feed X/Y/Z/-axis: 20 - 15.000 mm/minrapid traverse X/Y/Z: 60,00 m/minB - axis: -150° / +80° x 0,001 °feed B-axis: 3.600 ° / minC-axis: 360 x 0,001 °Rapid motion C- axis: 1 - 3.600 U / min.table load: 3.000 Kgtool magacine with: 240 tool diameter: 110 mmwotkpiece diameter with 2 vacant positions: 250 mmtool length - max.: 650 mmweight of tools max.: 15,00 kgtotal power requirement: 75,00 kWweight of the machine ca.: 55,00 tdimensions of the machine ca.: 12,50 x 8,00 x 4,20 m5-axis machining center with SIEMENS Sinumerik 840D control electronical handwheeloperating mode 4240-position tool magazine 4- ...
General Manufacturer: Hermle Type: C 40 U Year of Make: 2005 Control: Heidenhain TNC 430 Travels: X 850 mm, Y 700 mm, Z 500 mm B swivel axis Working spindle Speed: 28,000 rpm Tool/movement Tool changer: 38-speed Tool holder: HSK63A Dimensions and weight Weight: 10,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included Spindle coolers IKZ high-pressure system 80 bar Blum Laser Measurement Workpiece probes Electric Handwheel HR410 Chip conveyor Oil mist extraction
x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmcontrol: iTNC 530 HeidenhainMain spindle:: power capacity - main spindel: 13 / 9 kWturning speed range - main spindle: 20 - 10.000 min/-1Torque: 83 / 57 Nmtool taper: SK 40 tension force: 10 kNwork table:: table surface area: 790 x 560 mmnumber of T-slots: 4 + 1 T-slot - width: 4 x 14H12 / 1 x 14H7 mmT-slot - distance: 100 mmmax. table load: 600 kgtable height over floor: 720 mmTool-Presetter:: number of toolpositions: 30 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6 kgTotal weight, approx.: max. 60 kgfeeds:: feed speeds: max. 20.000 mm/minFeed force: 5 kNinput unit: 0,01 mmrapid traverse: 30 m/mintotal power requirement: 20 kVAweight of the machine ca.: 4,1 tdimensions of the machine ca.: 4,5 x 4,0 x 2,8 mDocuments: Coolantsystem: high pressure coolant: 6 barChip con ...
Key data: 650 mm, 600 mm, 500 mm
For sale is a Hermle 5-axis machining centre type C30 U (5 simultaneous axes). Equipped with the Heidenhain i TNC 530 controller. The travels of the X, Y and Z axes are 650 x 600 x 500 mm. The table diameter is 280 mm. The machine includes various clamping pallets that can be attached to the table. The maximum speed range is between 20 and 18,000 rpm. The spindle holder is HSK-63. In addition to the standard 32-cavity tool magazine, the machine has an expansion to 157 tool positions, bringing the total number of tool positions to 197. Furthermore, the machine is equipped with a Knoll high-pressure system with a maximum pressure of 40 bar including a fine filter system. A chip conveyor with rear discharge is also available. At the front of the machine is a robotic loading system with a significant number of pallet spaces (depending on the pallet size). This system is connected to the mach ...
x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: max. 18.000 min/-1power capacity - main spindel: 28 / 19 kWmax. Torque: 121 Nmtool taper: HSK-A 63 swivellable: B: +30° / -120 °NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mmmax. table load: 650 kgrotatable: C: 360 °tool magazin:: number of toolpositions: 2x16 pos.tool taper: HSK-A 63 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool weight: 8,0 kgmax. tool length: 315 mmfeeds:: feed speeds: max. 30.000 mm/minrapid traverse: 30 m/mintotal power requirement: 48 kVAweight of the machine ca.: 14,0 tdimensions of the machine ca.: 4,5 x 4,0 x 2,6 mDocuments: Chip conveyor: Coolantsystem: elektr. hand wheel: test probe: Heidenhain TS 640 Laser: Blum Operation mode 4: Rotary screen: Signal lamp - 4 colour: 3D quickSE ...
Key data: 762 , 508 , 508
HAAS UMC-750SS Machining Center TECHNICAL FEATURES: Year: 2019 Number of continuous axes: 5 X-axis stroke: 762 [mm] Y-axis travel: 508 [mm] Z-axis travel: 508 [mm] C-axis angular travel: 360 [°] Table dimensions: Ø630 x 500 [mm] Maximum weight Tabletop Allowance: 300 [Kg] B-axis angular travel: +110 [°] / 350 [°] Pin Attachment: CT 40 Maximum speed Spindle: 15000 [rpm] Spindle power: 22.4 [kW] Number of tool magazine stations: 40 Capacity of the garden tray: 284 [l] Number of hours in operation: 5277 [h] EQUIPMENT INCLUDED: x1 Center-Spindle Watering x1 High Pressure Coolant Pump 21 [bar] x1 RENISHAW Wireless Coin Probe x1 Calibration Sphere x1 RENISHAW Tool Probe x1 HAAS Oil Mist Vacuum x1 HAAS offset crank x1 HENNIG Chip Conveyor Type 101435 Machine visible under tension for testing at our premises, by appointment. Price excl. VAT on request, ...
x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: max. 18.000 min/-1power capacity - main spindel: 28 / 19 kWmax. Torque: 121 Nmtool taper: HSK-A 63 swivellable: B: +30° / -120 °NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mmmax. table load: 650 kgrotatable: C: 360 °tool magazin:: number of toolpositions: 2x16 pos.tool taper: HSK-A 63 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool weight: 8,0 kgmax. tool length: 315 mmfeeds:: feed speeds: max. 30.000 mm/minrapid traverse: 30 m/mintotal power requirement: 48 kVAweight of the machine ca.: 14,0 tdimensions of the machine ca.: 4,5 x 4,0 x 2,6 mDocuments: Chip conveyor: Coolantsystem: elektr. hand wheel: test probe: Heidenhain TS 640 Laser: Blum Operation mode 4: 5 Axis CNC - MachiningCenter UniversalDECKEL MAHO - ...
3-axis machining centre with automatic tool changer for aluminium or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control E 550 Speed infinitely variable up to 21,000 rpm Manual control unit Minimum quantity spraying Automatic tool change with magazine (4 places plus angle head) Tensioner detection and clamp displacement 4 pneumatic material clamps light barrier Weight: approx. 2,000 kg
x-travel: 1020 mmy-travel: 510 mmz-travel: 510 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Heidenhain4. axiselectronical hand wheel20-fold automatic tool changerchip tankTechnische Daten / technical details:Verfahrweg X / X-Travel 1020 mmVerfahrweg Y / Y-Travel 510 mmVerfahrweg Z / Z-Travel 510 mmTischgröße / table size 1200x450 mmWerkzeugschaft / spindle taper BT40 Drehzahlbereich / spindle speed 8000 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 20 Gewicht der Maschine ca. / weight ca. 5000 KgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General Manufacturer: Chiron Type: DZ 28 P five axis Year of manufacture: 2023 Control: Siemens Sinumerik 840D SL Travels: X 1,200 mm Y 1,100 mm Z 800 mm Rapid traverse: X 120 m/min Y 75 m/min Z 75 m/min Axle acceleration: X 1.0 g Y 0.8 g Z 1.5 g Main spindle drive Speed: up to 20,000 rpm 2-axis torque swivel device 2 x face plates diameter: 479 mm Swivel axis as A-axis Swivel angle: ± 120° Swivel radius: 700 mm Bridge dimension: max. 2,400 mm Repeatability: ± 5" Speed: 42 1/min NC rotary table as C-axis Clamping force: 25 kN +/- 15 % per clamping segment Repeatability: ± 5" Speed: 100 1/min Loading and unloading station for tools Tool Stations: 2 x 36 Tool shank: HSK-A 63 DIN 69893 Tool diameter: max. 78 mm Tool diameter with free adjacent spaces: max. 160 mm Tool length: max. 450 mm Tool weight: max. 10 kg Tool change time: approx. 0.9 s Ma ...
x-travel: 2100 mmy-travel: 1020 mmz-travel: 762 mmControl: Fanuc MXP-200FP spindle speed: 6000 U/minspindle capacity: ca. 22 kWmax. torque on the spindle: ca. 550 Nmtool taper: SK 50 table surface area: 2300 x 1020 mmmax. table load: 3000 kgT-slots: 6 x 22 mm T-slot - distance: 150 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-Axis CNC Machining CenterEquipment/Accessories:- Automatic tool changer with chain magazine, 40 stations - max. tool-Ø: 120/240 mm - max. tool length: 350 mm- coolant system with internal coolant supply and filter- emulsion mist extraction- electronic handwheel- 2 pcs. magnetic clamping plates 800 x 400 mm- various tool tapers SK50- chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 762 mm, 460 mm, 460 mm
Vertical machining center Okuma MB-46UAE Year of Make: 2004 Control OSP U100M Machinery ▪ Spindle – speed 8000 rpm. ▪ High-speed machining (Hi-Cut) ▪ Spindle load monitor (load monitoring) ▪ Thread milling (Herical-Cut) ▪ Workpiece zero points 50 pieces ▪ 200 Tool Corrections ▪ Manuals available (documentation) ▪ Tool changer with 32 positions ▪ Internal coolant supply Technical details ▪ Travel X-axis (column right-left): 762 mm ▪ Travel Z-axis: (table forward-backward): 460 mm ▪ Y-axis travel (spindle up-down): 460 mm ▪ Distance table surface to spindle nose: 150~610 mm Table ▪ Table size: 1000 x 460 mm ▪ Distance from the floor to the table surface: 800 mm ▪ Max. load capacity: 700 kg Spindle ▪ Spindle speed: 8,000 rpm ▪ Number of gears: infinitely variable ▪ Front bearing diameter: 70 mm ▪ Spindle: 11/7.5 kW ...
travel -x axis: 1.000 mmtravel -y axis: 510 mmtravel -z axis: 480 mmtravel of - x axis (rotary-tilting table): 420 mmtravel - x axis (fixed machine table): 450 mmcontrol: HEIDENHAIN iTNC 530 turning speed range: 50 - 12.000 U/minnumbers of positions in the tool changer: 20 tool taper: SK40 table surface area: 650 x 510 mmworkpiece weight: 300 kgClamping surface of rotary-tilting table: 420 mmworkpiece weight: 200 kgspeeds of rotary table: 30 U/min5-axis machining center | HEDELIUS - RS505 K IC 40/530/450/420/12, equipped with tool changer, ITC, zero-point clamping system and chip conveyor. In addition, the machine features a full enclosure and an extraction system with filter unit.With only 9,787 spindle hours, the unit shows low operating time.The machine is in a well-maintained condition and can be inspected at any time under power.A machine video can be provided on request.Please refe ...
5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 9,000 mm Y-axis travel: 1150 mm Travel Z-axis: 715 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material tensioners Pendulum operation through two light barrier areas Manual control panel Loading is included in the price Weight: approx. 8,500 kg
x-travel: 1270 mmy-travel: 670 mmz-travel: 625 mmCNC-control: SIEMENS 828 D table-size: 1300 x 670 mmmax. table load: 1000 kgspindle taper ISO: SK 40 spindle turning speed range: 12000 U/minfeed stepless: 8000 mm/minrapid traverse: 36 / 36 / 30 m/mindrive capacity - spindle motor: 18,5 kWtool change unit: 30 Pos.total power requirement: 40 kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 3,20 x 2,45 x 2,40 mchip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m- Siemens 828D CNC control- Direct drive spindle: 12,000 rpm- Two-contact clamping system in the BIG-PLUS spindle (SK40 spindle taper)- Oil cooling of the spindle head- Thermal compensation system (software)- Tool magazine: 30 tools- RENISHAW tool and workpiece probe- Internal cooling via the spindle centre: 12 bar- External cooling with air and cooling lubricant- Internal thread spindles + chip conveyor b ...
4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 3,100 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 3,000 kg Windows 7 Operating System Minimum Quantity Spraying Tensioner detection and automatic displacement 6 pneumatic material clamps 2 material stops Loading is included in the price
x-travel: 3.400 mmy-travel: 3.400 mmz-travel: 1.600 mmControl: CELOS 840D sl Op SiemensMain spindle:: max. spindle speed: 20 - 15.000 min/-1power capacity - main spindel: 52 / 42 kWtool taper: HSK-A100 max. Torque: 404 / 280 Nmswivellable: B: -30° / +180 °NC-Rotary table:: table diameter: 2.500 x 2.000 mmmax. table load: 10.000 kgtable speed: 5 min/-1distance spindle center to table: hor.: 130 - 1.730 mmdistance spindle center to table: vert.: 230 - 1.830 mmdistance spindle nose and table: hor.: -1.500 - 1.900 mmdistance spindle nose and table: vert.: -1.600 - 1.800 mmTool-Presetter:: type: 5x Rad- / Wheel number of toolpositions: 303 pos.max. tool diameter: 110 mmmax. tool-dia with free toolbox: 280 mmmax. tool length: 900 mmmax. tool weight: 45 kgtool changing time: 7,5 sectool taper: HSK-A100 feeds:: rapid traverse: 60 / 30 / 40 m/mintotal power requirement: 140 kVAweight of the ...
52.000 € add to watchlist
Key data: 1050 mm, 560 mm, 460 mm
incl. Robojob Mill-Assist Manufacturer: Okuma Type: Genos M 560-V-e Travels: X: 1050 mm, Y: 560 mm, Z: 460 mm Table size 1300 x 560 mm Maximum table load: 900 kg Tool Stations 32 Control: Okuma OSP-P 300Ma-e (NC-controlled) Serial number: 0712-101084 Year of manufacture: 2018 Accessories: Chip conveyor High pressure pump 15 bar, Internal cooling pneum. Peeping tom loading door, Automation: Robojob Mill-Assist Essential Robot interface Length probe Renischaw
x-travel: 4500 mmy-travel: 800 mmz-travel: 600 mmcontrol: HEIDENHAIN iTNC 530rapid traverse: 30/40/40 m/mintable surface area: 5300 x 750 mmtable load: 4,5 ttool taper: DIN 69871-A40 turning speeds: 30 - 6000 U/minspindle motor: 29 kWspindle distance: 325 - 925 mmtool piece magazine with: 30 Plätzentotal power requirement: kWweight of the machine ca.: ca. 20 tdimensions of the machine ca.: mequipped with:- CNC-Control Heidenhain iTNC 530- IKZ 20 bar- NC Swivable Table- Chip Conveyor- Coolant- Tool Changer 30-fold (SK 40)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
7.500 € add to watchlist
Key data: 1050 mm, 560 mm, 460 mm
Table size 1300 x 560 mm Tool Stations 32 Control: Okuma OSP-P 20 M Serial Number: 155968 Year of manufacture: 2011, retrofitted 2022 Accessories: Chip conveyor 4th axis, 0-point clamping plate 1 hinged quill
x-travel: 730 mmy-travel: 850 mmz-travel: 560 mmcontrol: Mazatrol Matrix Main spindle:: turning speed range - main spindle: 35 - 10.000 min/-1power capacity - main spindel: 30 / 22 kWtool taper: SK 50 Tool changer: 30 pos.size of pallet: 630 x 500 mmworkpiece weight max.: 500 kgA-Axis: -120 ~ +30 °C-Axis: 360 °rapid traverse ( X / Y / Z ): 42 m/mintotal power requirement: 64 kVAweight of the machine ca.: 19 tdimensions of the machine ca.: 5,5 x 2,69 x 3,5 m5-axis simultaneous machining centre:- 5-axis CNC control Mazatrol Matrix & handwheel- NC Rotary Table swivable- 30-fold tool changer (SK 50)- IKZ 20 bar- Chip conveyor- Renishaw RMP 600Operating/switch-on hours:The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1520 mm, 520 mm, 460 mm
The machine is currently still in Italy and will be available from the end of January 2026. Specifications: Manufacturer: Spinner Type: U5-1520 Year of Make: 2013 Control: Heidenhain TNC 640 Travels X/Y/Z axes: X 1,520 mm Y 520 mm Z 460 mm Travel C-axis| 360° B-axis travel: -5° (-90°)/+110° Milling spindle Speed: 20,000 rpm ("Built-In" direct drive) Tool Tool changer: for 54 tools HSK63 (double arm changer) Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: The machine is closed at the top. Hydraulic brake in both rotary axes B/C TNC Software Option "Automatic Kinematics Measurement Using Test System Cycles" TNC software option "5-axis simultaneous interpolation and 3D machining" Laser probe U-series for non-contact tool measurement Preparation Interface for Blum Infrared Probe TC50/TC52/TC54-20/ ...
x-travel: 610 mmy-travel: 510 mmz-travel: 610 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- ULTIMAX 4 control- toolchanger for 24 tools- coolant through spindle- chip tank- electronical hand wheelTechnische Daten / technical details:Verfahrweg X / X-Travel 610 mmVerfahrweg Y / Y-Travel 510 mmVerfahrweg Z / Z-Travel 610 mmTischgröße / table size 760x510 mmWerkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-10000 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 24 fachEilgang / rapid feed 30 m/minGewicht der Maschine ca. / weight 4700 KgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of L ...
Key data: 610 mm, 305 mm, 520 mm
Specifications: Manufacturer: Microcut Challenger Type: MCV-2412 Year of Make: 2004 Control: Siemens 810D ShopMill Travel: X 610 mm Y 305 mm Z 520 mm Working spindle Speed: 8,000 rpm Tool Tool changer: 16-speed Tool holder: SK40 Dimensions and weight Dimensions L/W/H: 1,930 mm x 1,850 mm x 2,490 mm Weight: 2,610 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: 4-axis electronic handwheel
x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmcontrol: iTNC 530 HeidenhainNC-Swivle milling head:: turning speed range - main spindle: max. 18.000 min/-1power capacity - main spindel: 10 / 15 kWmax. Torque: 130 / 87 Nmtool taper: HSK-A63 swivellable: NC: +30 / -120 °work table:: table surface area: 1.000 x 600 mmT-slots: 9x 14 x H7 max. table load: 700 kgtool magazin:: number of toolpositions: 60 pos.tool taper: HSK-A63 total power requirement: 49,7 kVAweight of the machine ca.: ca. 11,0 tdimensions of the machine ca.: 4,5 x 4,5 x 3,5 mDocuments: Chip conveyor: Coolantsystem: high pressure coolant: turning milling head: elektr. hand wheel: Rotary screen: paper band filter: Spray gun: exhaust fan: indexing attachment: EA-733.20 Tailstock: CNC - MachiningCenter UniversalDECKEL MAHO - DMU 60 monoBLOCK- 5 Axis- Swivel-MillingheadThe data for this ad was created with ModulMW ...
Key data: 2000 mm, 500 mm, 550 mm
Specifications: Manufacturer: Chiron Type: Mill 2000 high speed Control: Heidenhain TNC 530 Year of Make: 2013 Travels: X 2,000, Y 500, Z 550 mm Working spindle Speed: 12,000 rpm Start table Dimensions L/W: 2,600 x 550 mm Table load: 1,000 kg Tool/movement Tool holder: SK40 Tool changer: 40-fold Measuring system: direct X/Y/Z Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Conveyor Preparation FK7 Loading automatically "opening and closing" Tub flushing
x-travel: 500 mmy-travel: 350 mmz-travel: 610 mmControl: Heidenhain TNC 426 / 430 NC 2-Ax Dividing Head: ATS 200 / Sph. 200 mmmeasuring feelers - electric: Vorbereitung IR Meßtaster tool piece magazine with: 24 x SK 30 turning speed range: 50 - 18.000 U/minhigh-pressure pump: KNOLL KTS 25-38-T / ca. 5 kWchip conveyor: KNOLL 300 K-1/400 FKA 270 total power requirement: 20 kWweight of the machine ca.: 3,8 tdimensions of the machine ca.: 3,52,53 mSonderpreis bei Übernahme ab WerkThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Burkhardt + Weber BW Model: MC 120 Year of Make: 1999 Condition: Used Control: Siemens Sinumerik 840C Pallet sizes: 4 pieces 1000 x 1000 mm, 2 pieces 1250 x 1000 mm, 13 pieces 1600 x 1000 mm Pallet system length: 47000 mm Clamping area: 630 x 800 mm Table load: 1500 kg Spindle taper: DIN 50 Spindle speed: 6000 rpm Engine power: 37 kW B-axis travel: 360° Tool magazine: 144 positions Fuel tank capacity: 230 l Spindle bearing and spindle housing overhauled 09/2024.
Control: NCT table-size: 700 x 500 mmcoolant: ja Tool bore: SK 50 2 clamping devices20-position tool changerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Switch-on hours 51800 h Program running hours 15100 h Specifications: Speed, max.: 12,000 rpm Power: 77 kVA Weight, approx.: 18,100 kg
x-travel: 610 mmy-travel: 510 mmz-travel: 610 mmtable-size: 760 x 510 mmworkpiece weight: 1350 kgspindle taper:: SK 40 spindle turning speed range: 15000 U/minspindle motor: 9 kWdistance spindle /table: 150-760 mmrapid traverse: 38/38/32 m/minControl: WinMax 5 total power requirement: 19 kVATotal weight, approx.: 5000 kgdimensions of the machine ca.: 2,3 x 2,95 x 2,55 m3-axis machining centre with electric spindle (D series) equipped with:- WINMax 5 CNC control with 3D simulation graphics & handwheel- 30-fold Toolchanger (SK 40)- Chip conveyor- Renishaw probe- Dynamic diret tdrives on all axes- High-pressure cooling system- Spindle coolerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
