mach used for sale

Parts cleaning system Industrial washing machine degreasing made entirely of stainless steel! Manufacturer Render Type W175 Built: 1994 5 loading trolleys with 5 washing baskets, Basket size 1,125 x 1,125 mm Manual workstation with viewing window on one side with integrated high-pressure cleaner. Machine to be loaded/unloaded from both sides! Machine comes from an operating resolution and was in use until dismantling. Tank capacity approx. 2,000 litres, oil scimmers, filters, high-pressure pumps... Vertical door opening (lifting doors) on two opposite sides. This allows you to load on one side and unload on the other side. Due to the very high inner height, the system offers an optimal possibility to accommodate both very heavy laundry material as well as parts with large dimensions.

Milling machine from a training workshop in very good condition Manufacturer lid Type FP1 Active

Band saw Jespa 340/630 HAP column guided Band saw Jespa Semi-automatic Type 340/630 HAP Column-guided Built in 2009 Saw blade length 5.150mm

Key data: 40 , 200 , 1340

The all-electric servo bending machine is one of the products with independent intellectual property rights developed by our company. Special high-load screw and guide rail structure, imported bearing installation, high load-bearing capacity, high positioning accuracy, long life, machine tool rigidity, precision retention, and reliability are close to perfection. By introducing advanced design concepts and scientific design methods, the shortcomings that traditional designs cannot avoid have been solved. This bending machine is fast and simple to program, can realize concurrent linkage of multiple axes, fast feed positioning, and significantly improves the efficiency, accuracy and consistency of bending, which is far superior to traditional hydraulic bending machines, and does not require the use of hydraulic oil, is environmentally friendly and pollution-free. Compared with traditional ...

Key data: 420 mm, 650 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LB400M-1SC Year of Make: 2000 Commissioning: 2001 Control: OSP-U100L Spindle hours: 14502 hrs Delivery time: in stock Machinery - Interior extraction from Hengst Filtration (built in 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock available - Coolant supply, also available through the tool - Dialogue programming IGF - Chip conveyor (scraper) Technical details - Max. turning length: 650 mm - Max. turning diameter: 420 mm - X-axis travel: 300 mm - Travel Z-axis: 675 mm - Travel C-axis: 360° - Chuck passage: 72 mm - Spindle passage: 95 mm - Clamping cylinder passage: 95 mm - Tool holder: VDI 40 - Tool stations: Stations 12 - Spindle speed: 2800 rpm - Main spindle power: 22/30 kW - M-spindle ...

running direction: right - left for 28 mm VacuVent closure with safety housing

Pass width mm: 1300 02 Engines KW: 1 + 1 02 Brushes Brush diameter mm: 300 Vacuum table Control cabinet KW: 8.5

Grinding units Grinding belt length mm: 8000 Grinding width mm: 120 Feed max: 2200 m/min Manipulation unit Max machining range mm: 2100x650x400 Total connection kW: 7.2

Key data: 370 mm, 600 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LU300-2ST Year of Make: 2005 Control: OSP-E100L Delivery time: in stock Machinery  Parts conveyor belt and parts collection tray – workpiece chute with removal conveyor belt incl. electrical kit  2 disc turret with VDI40 (12 + 8 stations)  Power clamping cylinder for hollow chips – Hole in the drawbar 52mm  Extension Kit "D" – Kit one touch IGF-D  Open/close chuck while the spindle is running via M-Code  Reinforced coolant pump 8 bar  Coolant on A and B turrets can be switched via M function  Interface for connecting rod feed  Chip conveyor Technical details  Swing diameter over bed: 530mm  Swing diameter over slide: 380mm  Distance between the tips: 600mm  Max. turning diameter: 370mm  Max. turning length: 600mm  Travel X-axis: upper 260mm  ...

Grinding width mm: 1350 Pass-through height mm: 3 - 160 Feed max m/min: 2 - 20 - Inverter KW 3 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 24 SH - 15 KW Blow-off device Vacuum table Scotch Brite x mm 200 Machine Control: Viet "IPC 15" Touch Screen Centering device Weight Kg: 3970

Pass height max mm: 2000 Battery: 24V Chargers: automatic and high-frequency Automatic reading of the charging height: Reflective light barrier Total power: 0.75 KW

Key data: 340 mm, 1000 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LU15-M Year of Make: 2000 Control: OSP-U100L Country of origin: Japan Delivery time: in stock Long turning length-1000 mm Towable Tailstock – Automatic G152 Partial hollow clamping device The lathe is in very good condition. The basic and additional equipment makes it possible to process long turning lengths of up to 1000 mm with this used machine. Effective productions continue to be achieved thanks to the towable tailstock – automatic, the tool breakage/wear control, the partial hollow clamping device, the K-pump and the dialogue programming (IGF). An optimal machine for economical and reliable production. The machine is user-friendly and can be integrated into production immediately. Machinery Spindle motor VAC built 22/15 kW Long turning length – 1000 mm towable tailstock – automatic G152 3-jaw chuck Forka ...

Grinding width mm: 1350 Pass-through height mm: 3 - 160 Feed max m/min: 2 - 20 - Inverter KW 4 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 15 KW (INV) 01 Orbital grinding unit "Spinbrush" - KW 4 (INV) 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 15 KW (INV) Machine Control: Viet "IPC 15" Touch Screen Blow-off device 1 Blow-off device 2 Vacuum table Scotch Brite Weight KG: 7200

Technical data: Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving th ...

KRONEN AS 4 APPLE PEELING, CORING AND CUTTING MACHINE Manufacturer: KRONEN Model: AS 4 Year: 2017 Serial no.: 175012 Multipurpose semiautomatic apple processing machine designed to peel, core and cut apples into segments and slices of different sizes (depending on the cutting accessories that are used). It is capable of processing up to 3 apples at the same time. Made of stainless steel Max. capacity: 600 apples/hour (approx. 90 kg/h) Apple size: Ø 55 - 85 mm Electrical data: 230 V/50 Hz/0.18 kW/1PH Overall dimensions (mm): 300 x 660 x 400 (WxLxH) Weight: 35 kg The following cutting accessories are included: - Ø 23 mm corer - Blades for cutting into 10 and 24 segments

Travel x 350 mm y 250 mm z 220 mm Water bath machine Automatic wire threading Glass scales x / y incl. box for large coils incl. cooler incl. functional guarantee

Sweeping width mm: 880 Number of brushes: 2 Weight: Kg 646 Total connection KW: 3

Length: 2900 mm

Manufacturer: ESC – Europa-Siebdruck-Centrum GmbH & Co. KG Model designation according to nameplates: PAJD 1100-2C/IR and Perfection 1100 2C/IR Year of manufacture according to nameplates: 2016 and 2017 Machine/Factory Numbers: 9960-14-1065 / 11661 Electrical connection: 400 V, 50 Hz Rated current: 120 A (nameplate PAJD) Nominal power: 76 kW (Perfection nameplate) Degree of protection: IP40 Belt type: IR temperature tunnel with conveyor belt (width according to series: 1100 mm) Assembly: IR drying system for screen printing or varnishing processes Design: Closed safety enclosure with access doors Application: Drying/shortening of printed or coated components Location: Schierling Viewing possible by appointment.

-Car stainless steel -9 cloth drawers each 173x92cm

For Daub Hanseat Automatic

used vertical hydraulic internal clearing machine with 3 clearing points in very good condition Pulling power:8.000 KG Clearance length: 1000mm Bgno2qtoyx Clearing: 3 pieces (4 pieces) Distance between clearing points:100mm Mounting diameter of the drawing heads3 x x 85mm Workpiece diameter: max. 1x 460mm / 2x 198mm / 3x 98mm Cutting speed: hydraulically infinitely adjustable from 1m/min up to max. 7m/min Return speed: hydraulically infinitely adjustable from 5 to max. 25m/min Space requirement of the machine (b x t x h) approx.:1400 x 2000x 3600mm (without service & operator environment) Power supply / connection value: 380Volt 50 HZ / 6.5 KW Accessories / Optional equipment: -manual and automatic clearing operation - Drawbridge for 3 clearing points - Workpiece table for 4 clearing points (only usable with special pullheads) - automatic tool feeder - tension dis ...

Rego SM4 Stroke Machine Stirring Machine for 40 Liters For sale is a Rego SM4 stirring and stirring machine, a robust and powerful device for bakers. The machine is ideal for whipping and stirring various creams and light doughs. Rego SM4 Stroke and Stirring Machine - Manufacturer: Rego Herlitzius - Model: SM4 - for mixing, kneading, beating and stirring a wide variety of masses (e.g. doughs, creams, shames, etc.) - for a maximum of 40 litres - Speed adjustable - 2 working functions, stirring or beating - Boiler lighting - With EMERGENCY stop button - incl. 2 whisks + 1 kettle Technical data and dimensions: - Connection 400V, 16A plug - Power: 1.6 kW - Dimensions: 720 x 680 x 1710 mm, WxDxH - Weight approx. 285 kg The machine can be visited and tested by appointment. More information and pictures as well as delivery on request.

Woelfel B100/S used machine Spindle dia 125mm MK 6 Ram dia 165 mm with stroke 200 mm Spindle speed in 24 steps from 30 - 1200 rpm Vert. travel of headstock 1250 mm Bed clamping surface 870 x 700 mm Additional table 710 x 560mm height 500 mm Height between bed and spindle nose 1460 mm

4 Belt grinding unit 2 grinding brushes Carpet length mm: 5500 Carpet width mm: 400 (extendable) Weight Kg: 800

Soehnle Professional 2790 Weighing Terminal Floor Scale 9013 The SOEHNLE 2790 display unit is very handy and also protected according to protection class IP65, which means that it can also be used in wet areas without any problems With only five buttons, the SOEHNLE 2790 digital display device is particularly easy to operate. The built-in functions are on/off, tare, clear tare, zero and print. In addition, the 2790 indicator also has a piece counting function. The SOEHNLE 2790 display unit can be operated not only with the 230 V power supply included in the scope of delivery, but also with batteries for up to 100 hours independently of the mains. The 20 mm high digital display is backlit when plugged in and is therefore particularly easy to read. In battery or battery operation, an automatic switch-off can also be set to protect the batteries and batteries. Soehnle ...

DIGI SM-5500B System Scale SM-5500B, the advanced PC-based system scale printer that provides you with multiple retail solutions. Increases operating revenue, improves operations with integrated queuing and collection system through various innovative features of the SM-5500B. Experience real retail solutions offered by DIGI's PC scales. • Linerless printing with integrated automatic cutting device • Watermark printing • Speed ID • InfoTag and electronic signage e.Label • Integrated queuing and collection system •Waste management • Interactive screen display Power source 230 V (50/60 Hz.) Operating Humidity 15% - 85% RH Non-condensing Operating temperature -10° C to +40° C Operator display 12.1" Customer Display 7"WVGA (800x480) Interface RS232C, Ethernet (standard) max. 15/30 kg, min. 100g, e = 5/10g, Dimensions (in mm) 385(W) x 507(D) x 148(H)  ...

sheet metal cleaning machine from Schlee. The machine was built in 2011. Sheets up to 58 cm wide are suitable. Schlee sheet metal cleaning machine Type: Uni-58 Built in 2011 for sheets up to 58 cm wide cleans / brushes oiled mobile on wheels m. fixed Stainless steel More information on request. Dimensions: Height: approx. 115 cm Width: approx. 150 cm Depth: approx. 89 cm

Slotting machine TOS HOV63

General Manufacturer: Stama Type: MT 733 two Year of Make: 2020 Control: Siemens Sinumerik 840D SL Travel: X 615 mm Y 290 mm Z 500 mm Rapid traverse: 65 m/min Feed: x 4,000 N / Y 4,000 N / Z 8,000 N Main spindle unit Speed: 12,500 rpm Tool holder: HSK-T63 Pull-in force: 18 kN Spindle bearing diameter: 80 mm Tool magazine Number of available magazine slots: 64 Tool diameter max. when fully equipped: 78 mm Tool diameter max. with free secondary positions: 140 mm Tool length: max. 300 mm Tool holder: HSK-A/T63 Tool weight: max. 10 kg Total chain load: max. 115 kg Rotary swivel unit Swivel angle: +30 to -180° Swivel axis repeatability: ±1" Swivel axis speed: max. 61 1/min Clamping torque tangential swivel axis: 3,000 Nm Clamping torque tangential counter bearing: 1,800 Nm Condition Condition: Used Functional: tested and fully functional

Make : ILPRA Model : FS 4000 Capacity : 4000 Volume of Filling : 100-500gr Pockets : 2x8 Cup Dispensing Filling Aluminium Lid Application Lid Sealing Fully Fuctional May be used for jam filling, but can work with other products like yoghurt or cream cheese. Electric power supply: 400V 50Hz 3N

Workpiece width max mm: 1700 Material thickness max mm: 100 02 Workbenches mm: 5000 x 1700 02 Oscillating aggregates Rollers (cotton) mm: 350 02 Roller motors HP: 18.5 Vacuum Table - HP 12.5

Zoller tool pre-setr with change adapter for index GE / GB / ER / machines as well as Gildemeister GM / Schuette lathes partly universally applicable (VDI etc) - with Heidenhein measuring device - various base holders - Measuring table Etc.

used industrial head machine King I-REX T4/3S-1/1-85/9 for sharing and circular action of Teigen. -4 in sequence -Industrial design -Stainless steel clad

Heid S-200 CNC Lathe Manufacturer: Heid Type: S 200 Machine Type: CNC Lathe Tailstock travel: 175 mm Tailstock quill holder: Morse cone: 4 MK Quill stroke: 140 mm Quill diameter: 95 mm Pressure capacity: 17 kN Connection 50 Hz 3x: 380 Volts Total power requirement: 65 kVA Spindle speeds: Infinitely variable from 0 rpm to: 4000 rpm Spindle bore: 77 mm Tool shank cross-section: 25x25 mm Turning diameter above the bed: 420 mm Turning diameter maximum: 250 mm Turret slide: Longitudinal travel (Z-axis): 1150 mm Flat travel (X-axis): 230 mm More items - new and used - can be found in our shop! International shipping costs on request!

Parallel lathe Geminis GE650S to be rebuilt. Distance between points: 1000mm. Flip on bench: 680mm. Flip on cart: 410mm. Flip over neckline: 850mm. Main hole: 84mm. Motorized trolley and charriot. Speeds: 18 (13-1000rpm). Main engine: 15hp. Plate and trolley protections and CE RD1215/97 certificate. Quick-change plate and turret.

-Circular knife bread cutting machine -Cutting width 400mm -Note thickness adjustable -Built in 2015

Description Seiger lathe SLZ 800E x 4000 Details Machine no. 4443 Year of construction 2008 Siemens Cycle Control Spindle holder according to DIN 55027 size 11 Spindle bore Ø 130 mm Spindle diameter in the front bearing 170 mm Spindle taper 1:20 Drive power 20/28 kW Main spindle speed switching stage "I" 9-1,800 min-1 Main spindle speed switching stage "II" 9-400 min-1 Maximum torque: 3,200 Nm Center width 4,000 mm Circulation Ø above the bed 810 mm Circulation Ø above the face slide 540 mm Bed width 480 mm Machine dimensions 2,000+center width x 2,750 x 2,000 mm Permissible workpiece masses between points without setting stick 2,000 kg Permissible workpiece masses between points with a setting stick 2,200 kg Permissible workpiece masses between tips with two setting sticks 2,500 kg Permissible workpiece masses flying i ...

Description Heyligenstaedt Lathe NDb-630 Details Year of manufacture 1980 Tip height above bed 630 mm Turning length 3,000 mm Turning diameter over bed 1,240 mm Turning diameter over bed slide 960 mm Max. workpiece weight without support 10,000 kg Bed width over guideways 850 mm Number of guideways 2 Bed height 650 mm Slide path 3,000 mm Face plate diameter 1,100 mm Main spindle diameter in the front bearing 280 mm Max. torque at the face plate 25,000 Nm max. workpiece weight clamped on the fly at center of gravity distance 250 mm in front of face plate 4,000 kg Main spindle speed range 2.24 - 450 rpm. Number of main spindle speeds 4 mech. Levels Power main motor 50 kW Main motor speed 100-1,000-2,500 rpm. Number of supports: 1 Cutting force support 4,000 kg Guide length front bed track 1,300 mm Quill diameter 250 mm ...

Drawer fitting machine husband Type: XII LOD 2 oscillating abrasive belts Grinding wall surface 760 mm long x 280 mm high max. drawer width - fit width 1000 mm maximum drawer height 250 mm Width adjustment by handwheel Support tables on each grinding wall outside Support table size 650 mm x 235 mm Engine strengths 1 x 4.8 kW and 1 x 7.5 kW Dimensions 1900 mm x 1300 mm x H 1200 mm

Ceever Spraymaster Turning Spray Washer The Spraymaster series of industrial washing systems are advanced solutions for spray cleaning of small and medium-sized components with a capacity of up to 4000 kg. Thanks to a rotary table that allows the parts to be evenly wetted with the spray jet, these systems ensure maximum effectiveness in surface treatment. Inside the treatment chamber, a channel system with strategically positioned nozzles allows for complete spray cleaning of all surfaces, optimizing chemical, mechanical and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Loading: 500 kg/batch Voltage: 380 volts Current consumption: 90 A Connected load: 62 kW More items - new and used - can be found in our shop! International shipping costs on request!

Technical data: Total length mm: 19800 Working width: mm 1000 Working length mm: 6600x1000 Pass-through height mm: 100 Polishing discs: Yes Polishing discs for edges: yes Diameter polishing discs mm: 200 Vacuum table: Yes

Dimensions (L/W/H): 2150x1300x1780 mm Weight: 1000 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ELUMATEC SBZ 628 profile machining center was built in 2016 in Germany by elumatec AG. The machine has been regularly serviced throughout its service life. The ELUMATEC SBZ 628 profile machining centre is an extremely versatile solution for advanced machining of window profiles, door profiles or facades. It enables precision machining of any type of profile with a maximum length of 7500 mm. Cutting, drilling and milling is performed in a single work cycle by advanced machining units located inside a sound-absorbing cabin. A clamping system positions the workpiece instantly and holds it securely during the entire machining process. Grippers, spindles and a cutting disc with a 360° rotation range enable machining of the profile in multiple positions, while maintaining constant accuracy. All this is completed by the quick-change mechanism for guide rollers and tools, which considerably  ...

Special production plant of the brand Friulmac for the production of (standard) garden houses, wooden houses, log houses etc. System Block construction and block plank construction tools, milling and suction device. As good as new!

Kalmeijer pastry moulding machine KGM Table Model Pastry moulding machine Kalmeijer KGM with 10 plates and 2 moulding rollers. Pastry moulding machine is suitable for the production of mürbeteigen. With different moulding rollers, the pastry can be moulded into the desired (depending on the mould ingeu) roll. The dough feed and the moulding roller are neatly removable to clean them. The moulding roller can be heated by means of heating. Sheet metal feeder is automatic, the machine stops when there is no sheet metal on the trensport plate. Machine is compact and easy to use. Kalmeijer pastry moulding machine with 1 moulding rollers with 10 black baking sheets Table equipment with heating automatic sheet metal feeder thick of the dough figures is adjustable Dough hopper, moulding roller, dough feed roller is easily removable for cleaning Easy to use The trasnport beams for ...

Cone cutter and profiling machine First working area - OPENING TABLE WITH TRANSPORTBAND Length: 2600 mm, adjustable speed, inverter controlled. Second work area: PRODUCTION AREA Group of eight with movable longitudinal slide and cone cutter unit, numerically controlled. MULTIPLE CONE CUTTER UNIT: Motor with 7.5 HP, 3000 rpm, inverter-controlled, Spindle diameter: 50 mm, length: 270 mm WORKPIECE RETURN

GM-SB-38CNC-2A1S mandrel bending machine was built in 2022 in China by ZHANGJIAGANG KING-MACC MACHINERY MANUFACTURING CO., LTD. The machine is used for precision bending of bars, profiles and tubes with a maximum diameter of 38 mm. The process is performed by means of a reliable working head, operating in manual or automatic mode. In order to guarantee high positioning dynamics combined with excellent positioning accuracy, all axes are equipped with powerful servomotors. Ease of operation is ensured by a convenient operator panel with PLC control. Its large memory enables the storage of up to 200 working programmes, as well as the rapid programming of even the most complex shapes. All this makes the GM-SB-38CNC the perfect solution for any production facility. The GM-SB-38CNC-2A1S tube and profile bending machine weighs 2000 kg. Technical specifications of the GM-SB-38CNC-2A1S tube be ...

Strapping machine SMB SM1-600; good condition; cleaned and tested; Frame size 600x600mm; Bandwidth 5mm; Core diameter 200mm; Power max.42 Strappings/min.; suitable for PP-band 5mm DIN 55535; Stand-up device; Footswitch. Strapping machine SMB SM1-600; good condition; cleaned and checked; frame size 600x600mm; band width 5mm; core diameter 200mm; speed up to 42 straps/min.; used for PP-band DIN55535; floor mounted machine; foot switch.

KIMLA BPF 2070 CNC router was built in 2010 in Poland by POLCOM Przemysław Kimla. The machine is used for precision machining of parts made of such materials as wood, plastics and aluminium. The machining process is performed on a large work table with a length of 7050 mm and a width of 2085 mm by means of a reliable, high-speed spindle. Process stability, on the other hand, is ensured by an extremely rigid design that effectively eliminates any vibration and oscillation during even the most intense challenges. All this is complemented by an industrial CNC controller with easy-to-use PC-CAM software. The BPF 2070 CNC milling machine weighs 6000 kg. Technical specifications of the KIMLA BPF 2070 milling machine - machinable materials: wood, plywood, polycarbonate, polymer plates, aluminium, etc. - feed in the X/Y/Z axis: 2085/7050/500 mm - work area (L x W): 7050 x 2085 mm - maxim ...