Manufacturer:
(Category: 102)
turning diameter: 140 mmturning length: 615 mmcontrol: C200-4D spindle passage: 65 mmMain spindle: turning speeds: 5.000 U/minmax. torque at 40% / 100% load: 145 / 105 kWturret-slide: 1,2 und 3 x-travel: 110 mmz-travel: 360 mmy-travel: 70 mmrapid traverse X/Y/Z: 25/12/45 m/minOpposed spindle: slide travel X-axis: 150 mmZ- Travel: 600 mmturning speeds: 5.000 U/minB - axis: B-Korrekturachse +/- 1 °tool turret - number of stations: 3 x 12 tool taper DIN 69880: VDI 25 x 48 C-axis: 0,001 °total power requirement: 61 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 9,75 x 3,10 x 2,85 mLoading:Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm)Unloading:BREUNING ILS-REX-7208 automatic workpiece unloader, built in 2007The data for th ...
Turning diameter: 320mm, turning length: 1000mm, spindle clearance: 80mm, speed: 3150rpm, travel X/Z: 265mm/1000mm. Machine dimensions X/Y/Z: approx. 5500mm/2400mm/2400mm, weight: approx. 7000kg, control: Traub System TX-8. Including a tool set, three-jaw chuck and bar chuck with collets. Documentation available. On-site inspection is possible.
turning diameter over bed: 280 mmturning diameter over slide rest: 150 mmturning length: 800 mmturning speed range: 26 - 2000 U/minspindle bore: 24 mmtotal power requirement: 0,8 / 1,6 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,60 0,70 1,20 m1. Hand - School MachineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rotation diameter over bed/slide: 560mm/300mm, max. workpiece weight between centers: 2500kg, max. workpiece weight in chuck: 800kg, center width: 1000mm, machining length: 980mm, feed: 8m/min, bed width: 433mm, tool positions: 8, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3000mm/2300mm/1800mm, weight: approx. 3700kg, control: Siemens 810D Manual Turn. Documentation available. On-site inspection is possible.
Turning diameter over bed/cross slide: 500mm/280mm, max. workpiece length: 1500mm, travel X/Z: 280mm/1430mm, spindle bore: 82mm, speed: 2200rpm, rapid traverse X/Z: 6m/10m/min, quill diameter: 75mm, quill stroke: 150mm, bed width: 400mm, chuck diameter: 250mm. Machine dimensions X/Y/Z: approx. 3350mm/1750mm/1650mm, weight: approx. 2700kg, control: Fanuc Series 0i Mate-TC. Documentation available. On-site inspection is possible.
Turning diameter over bed: 500mm, turning diameter over face slide: 250mm, center distance: 2000mm, spindle bore: 58mm, speed: 1400rpm. The feed of the machine is defective. On-site inspection is possible.
Vertical turning lathe SEDIN 1512 CNC CNC control- Eastern origin Table diameter: 1120 mm Max work-piece: -Diameter: 1250 mm -Height: 1000 mm -Weight: 3200 kg Table speeds range per 1 min: 5-250 Tool dimensions: 25×40 Max horizontal travel of the vertical ram: 775 mm Max vertical travel of the vertical ram: 700 mm Max horizontal travel of the horizontal ram: 630 mm Max vertical travel of the horizontal ram: 1000 mm Max turning angle of the vertical ram: 45 degree Cross rail: -Travel: 660 mm -Speed: 400 mm/min Main motor power: 30 kW Overall dimensions: 2750×2975×4100 mm Machine weight: 15700 kg
SEDIN 1516 CNC Vertical Turret Lathe CNC control- Eastern origin Turning diameter: 1600 mm Table diameter: 1400 mm Max workpiece height: 1000 mm Max table loading: 5000 kg Max horizontal ram travel: 630 mm Max horizontal carriage travel: 975 mm Max vertical ram travel: 700 mm Max vertical carriage travel: 1000 mm No of feed carriages: 16 Carriages feed range: 0,07-12,5 mm/rev Distance between table and ram: 0-1225mm Fast stroke: 2000 mm/min Main motor power: 30 kW Speeds range: 4 - 200 rpm Dimensions: 3190x3360x4100 mm Weight: 18200 kg
SEDIN 1516 Vertical Turret Lathe Turning diameter: 1600 mm Table diameter: 1400 mm Max workpiece height: 1000 mm Max table loading: 5000 kg Max horizontal ram travel: 630 mm Max horizontal carriage travel: 975 mm Max vertical ram travel: 700 mm Max vertical carriage travel: 1000 mm No of feed carriages: 16 Carriages feed range: 0,07-12,5 mm/rev Distance between table and ram: 0-1225mm Fast stroke: 2000 mm/min Main motor power: 30 kW Speeds range: 4 - 200 rpm Dimensions: 3190x3360x4100 mm Weight: 19200 kg Side support
Siemens 840D Control - Iemca Boss 545E-r/32 barfeed - Nanocool CIL750 A-CT oil cooler - machine has worked with oil
turning diameter over bed: 800 mmturning diameter over slide rest: 860 mmturning length: 6000 mmturning diameter: 800 mmswing diameter over bed slide: 800 mmswing diameter over cross slide guide: 520 mmspindle bore: 71 mmspeeds: 11,2 - 1800 U/minvolt: 400 Vchuck: 315 mmchuck: 630 mmtotal power requirement: 15 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Parallel Lathe JET PROMAC 941 V Between points: 500 mm Maxi Ø on bench: Ø 240 mm Maxi Ø over saddle: Ø 140 mm Spindle diameter: Ø 21 mm Spindle speed: from 100 to 1700 RPM Square turret Chuck: 3-jaws Ø 125 mm Year of construction: 2012 - Almost new Spindle motor: 1,3 kW Threadings: Metric + Whitworth Tailstock: CM2 Variable speed drive for the spindle Supplied with one 4-jaws chuck Ø 125 mm Supplied with the gears for threading Electronic tachometer Voltage: 220 V mono Dimensions (L x W x H): 1200 x 600 x 1400 mm Weight: approx 200 kg
faceplate diameter: 4000 mmswing diameter: 4300 mmturning height: 1750 mmslide adjustment: 1000 mmtable load: 18 tturning speeds: 1-92 U/minControl: Siemens type: 840 D mmRest: 2 chip conveyor: ram head dimension: 250x250 mmFeed: 1-4000 mm/minmain gear-box motor: 55 kWtotal power requirement: 85 KVAweight of the machine ca.: 64 tdimensions of the machine ca.: 8x5,8x8 mThe machine was overhauled in 2007.The machine is currently designed to machine rings,but can be converted again for machining large parts.Additional informationChip conveyorThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested ...
Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible.
Workbench parallel Lathe WABECO 10200 Between points: 500 mm Maxi Ø on bench: Ø 200 mm Maxi Ø over saddle: Ø 120 mm Spindle diameter: Ø 26 mm Spindle speed: from 10 to 1000 RPM (on electronic dimmer) Square/ tilting turret 3-jaws chuck Ø 100 mm Year of construction: 2001 Tailstock CM2 Longitudinal auto feeds Supplied with the gears (see photo) Supplied without the table Voltage: 220 V mono Dimensions (L x W x H): 1200 x 300 x 450 mm Weight: approx 100 kg
CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 520 C-axis: 360º (0.001°) Turning length mm: 515 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Counter spindle Counter spindle travel mm: 525 Equipment Chip conveyor Signal lamp Tool measuring arm Workarea light Working time hours Under power: 7.456 Cutting Time: 5.423 Basic machine dimensions / weight Length mm: 3.495 Width mm: 2.050 Height mm: 2.230 Weight kg: 5.800
ED 300ECO Metal Lathe Motor 400W (S1) 230V 50Hz Dimensions in mm 760x230x254 Center width/height 300mm / 90mm Rotary spindle speed 50-2500 rpm Spindle bore 20mm Spindle mount MK3 Tailstock Cone MK2 Travel longitudinal slide 275mm Traverse travel cross slide and top slide 70mm Quill path 5mm Thread Metric in mm/r 0.5-2.5 max. tool holder 8mm Weight 48kg G&HM ED300Eco_2
Key data: 800 mm, 4000 mm
Description Seiger SLZ 800E cycle lathe incl. milling unit Details Machine no. 4443 Year of construction 2008 Control Siemens Sinumerik Turning diameter 800 mm Turning length 4,000 mm Face plate 800 mm, 4 jaws Face plate 500 mm, 4 jaws 3-jaw chuck 400 mm Lynette up to 450 mm (2 different) Accessories various jaw sets powered tool Permissible workpiece dimensions: between tips without setting stick 2,000 kg with a setting stick 2,200 kg with two sets 2,500 kg flying in the face plate 750 kg Machine dimensions incl. cladding 2,000 mm + Tip Wide x 2,750 mm x 2,000 mm incl. documentation
The machine is in good technical condition, inspection and trial operation is possible by prior arrangement
The machine is in good technical condition, a visit and test drive is possible by prior arrangement. - Spindle passage 65 mm - without driven tools, with replaced bearings and belts.
The machine is in good technical condition, an inspection by prior arrangement is possible. Max. turning diameter: 465 mm Max. circumferential diameter: 680 mm Max. rotation diameter via cross slide: 465 mm Max. width of the cross-section: 315 mm Travel in X/Z: 300/1050 mm 315mm 3-Jaw Hydraulic Chuck Max. spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% ED): 33/22 kW Max. spindle torque (40%/100% ED): 630/420 Nm Max. speed driven tools: 4000 rpm Programmable tailstock, tool measurement, chip conveyor S/No. 8045000336E (2011) Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): 5250 x 2300 x 2000 mm Machine weight: 8000 kg
Control Siemens 840D Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Speed 4,500 min-1 8-speed revolver Conveyor
bar capacity 51 mm - three turrets - three Y axis - fixed/driven tool holders - Lns Sprint 552 barfeed new in 2011 - Fanuc Control
The machine is in good technical condition, a test run is possible by prior arrangement. (spindle 32 mm) + Mitsubishi E60 control. Bar feeder included – for bars up to 3000 mm! Max. turning diameter: 60 mm Max. turning length: 120 mm Circulation diameter over cross slide: 120 mm X-axis: 170 mm Z-axis: 170 mm Spindle bore: 34 mm Max. bar diameter when using the loader: 32 mm Spindle holder: diameter 85 mm Spindle motor: 3.7 kW Spindle speed: 100–5,000 rpm Rapid traverse (X and Z axis): 15 m/min Min. program input: 0.001 mm Max. tool diameter: 16 mm Machine dimensions (L x W x H): 1200 x 1000 x 1500 mm
The machine is in good technical condition, a test run is possible by prior arrangement. Accessories included.
The machine is in good technical condition, a test run is possible by prior arrangement. Hours: 8,981 Upper driven tool turrets with Y-axis, lower driven turret, double slide with two spindles. Control: FANUC 31i-B. Max. circumferential diameter above the bed: 300 mm Max. circumferential diameter over the support: 230 mm Max. turning diameter above the bed with upper turret: 230 mm Max. turning diameter above the bed with lower turret: 230 mm Max. turning length: 600 mm Max. distance between the ends of the right and left spindle: 980 mm Milling area outside the axis of rotation due to Y-axis: 100 mm (+/- 50 mm) Max. rod diameter (left spindle): 65 mm Max. rod diameter (right spindle): 65 mm Max. permissible workpiece weight without sub-spindle (incl. chuck weight = 23 kg): 12 kg Total weight: 7,800 kg Accessories: SS 2500 bar feeder, length 200–1 ...
"The machine is in good technical condition, a test run is possible by prior arrangement."
The machine is in good technical condition, a test run is possible by prior arrangement. Glass lining Ø 200 mm Oil separator Filtermist S800 (2 years old) Reducer sleeves, hard and soft jaws Clamping claws Renishaw button
- spindle drum locking by means of a triad of HIRTH-type rings, - central lubrication system, - 8 indipendent frontal slides, - 4 compound slides in pos. 1, 2, 5, 6, - 4 radial slides in pos. 3, 4, 7, 8, - double slide in pos. 8, - 2x pick-up spindle (pos. 4 + 8), - 2x pick-up spindle stop attachment (pos. 4 + 8), - chip conveyor, hinged belt type, - high pressure coolant system, - removable coolant fluid tank, - bar stock reel for bar length 3 m, - various camms, - various gears, - electrical preparation for auto bar loader, Number of spindles: 8, Max bar diameter [mm]: 32, Spindle speed [rpm]: 270 - 3.750, Spindles interaxis [mm]: 360, Max bar feed [mm]: 125, Weight of the machine ca. [kg]: 11.500
