beverage machines used for sale (2,669)

Bucher MP 27 with the following accessories Double juice tub and pomace snail Juice tub with pump and level control. the following parts of the press were replaced in 2022: New press cloth and replacement cloth available. New drainage elements New drainage cores, split pins and discs New timers. Various new contactors in the control box as well as new installation of selector switch for drum rotation direction

- Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 3100 mm - Width : 1400 mm - Height: 1800 mm Equipment : - Rectangular manhole 320 x 420 mm, offset to the side - Partial discharge, flap valve, DN 40, Friedrich no. 2 - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2

- Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 3800 mm - Width : 1850 mm - Total height: 2700 mm - Ground clearance: approx. 350 mm (on concrete wall) Equipment : - Rectangular manhole 320 x 420 mm - Partial discharge, flap valve, DN 40, Friedrich no. 2 - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2

- Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 2150 mm - Width : 1350 mm - Total height: 2700 mm - Ground clearance: approx. 350 mm (on concrete wall) Equipment : - Rectangular manhole 320 x 420 mm - Partial discharge, flap valve, DN 40, Friedrich no. 2 - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2

BAVARIAN BREWERY TECHNOLOGY - 80HL BREWERY WITH TANKFARM YEAR 2009, UPGRADED 2020 FORMER DARK STAR UK BREWERY Alan Ruddock Complete Malt Milling System with Steels Masher Bavarian Brewery Techology Mash Mixer Bavarian Brewery Techology Lauter Tun Bavarian Brewery Techology Brew Kettle Bavarian Brewery Techology Whirlpool Scada Control System (2020) HLT Vessel 1 8500 Litre HLT Vessel 2 8500 Litre CLT Vessel 20,000 Litre Brewhouse Pumps, Flowmeters, Valves, Pipework TANK FARM 6x Bavarian Brewery Technology Stainless Steel Jacketed Conical Fermenter, 9,000 litre 4x Biomashin Stainless Steel Jacketed Conical Fermenter 9375 litre, 2011 4x Biomashin Stainless Steel Jacketed Dish bottom tank, 9200 litre, Year 2012 TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter Also 37 bbl ...

1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...

1 of used, combined canning and bottling line for beer or soft drinks, new 2016. Consists of the following equipment: - Semi-automatic, high-level, sweep-off, bulk can depalletizer, make COMAC. - Gravity can twist-rinser, make Eurosistemi, type GRV. This is a twin lane unit for 330- and 400/500-ml cans. - Can filler/seamer, make Comac, type Pegasus 8/1M. Output: 3,500 cph x 330ml (202/211 lid/body). - Vacuum Barrier Corporation liquid nitrogen dosing system for cans. - Level detector/rejector, make FT Systems. Checks for under- and overfills. - Assorted can and bottle conveyors. - VFDs for conveyor motors (control panel itself not available). - Self-adhesive labeller, make BRB, type MEGA ADE 622, 2 label stations (front/back wrap-around), rated at up to 4,000 cph / bph. - Semi-automatic carbonator/nitrogenator. Skid-mounted unit complete with stainless steel control panel, m ...

1 of used sleever, make Fuji Seal Europe, Intersleeve 3200 DE, new 2000. Siemens S7 controls (with upgraded applicator controls). Steam-tunnel. Last sleeving 500 ml PET bottles at a speed of 21.600 bph.

Depalletizer is used for unloading new bottles, delivered on pallets. After clamping one whole row from bottles layer by gripping head, the device delivers them to the unloading table, and the bottles are transported to the washing machine or filling machine. - Capacity up to 6 000 bottles / hr. - Operation - 1 person - Dimensions of bottles: - diameter 20 to 120 mm - height from 50 to 350 mm - Lifting height to 4m, - lifting capacity – to 40 kg - Lifting speed - 7m / min - Speed - 7 m / min - Enviroment temperature - 5 to 45 degrees C - Total power requirement - 0,8 kW - Air Pressure - 0.5 - 0.6 MPa / stable /

1 of used basket erector, make Schleuter (Germany), type TLA, new 2003. Siemens S7 controls. Used for erecting 4- and 6-pack baskets for 330 ml glass bottles with diameter 60 mm x height 226 mm in a 30.000 bph bottling line. Potentially available at additional cost: basket laner (from 1 to 2 rows), Kettner Contipac (2003) 6-head rotary bottle packer (24 bottles per head), as well as Involvo/AdPack PTF60SW (2004) wrap-around/tray/shrinkpacker, and inter-connecting conveyors.

1 of used traypacker, make Kettner, type Traypac T-45. New 2001. Operating side right. With dual-lane LM divider and various LBP conveyors. Used to pack 330 and 500 ml PET bottles pre-packed in shrinkwrap film as total 4x6-packs on tray (long-side leading). Nordson hotmelt unit. Siemens S7 plc.

1 of used multi-packer, make SMI, type MP 300 RD, new 2002. Capacity upto 300 cycles/minute. Used for PET bottles dia. 66-73 mm x height 179-230 mm, as 2x2=4 and 2x3=6 bottles per sleeve. Future formats (not commissioned) 2x4=8 and 1x3=3. With Roto-Divider.

Used bottle washer manufacturer: Klinger / Austria Year of construction: 2000 / General overhaul in 2010 at the Klinger Austria plant Type: Euro Class 24/1/844 Capacity: approx. 10,000 bph Control: Siemens S7 Total operating hours: 17,443 hours Net weight: approx. 18,000 kg Steam heated Can be used for bottles: Volume: 200ml - 1.000ml Bottle diameter: 50 - 90 mm Bottle height: 110 - 330 mm The bottle washer has so far been used for: 330ml Longneck 500ml Longneck 330ml swing top bottle 500ml swing-top bottle

100hl Complete Brewery Location: UK SCADA Controlled 100HL SPR UK brewery capable of 3 brew cycles per day Mash Conversion Vessel Lauter Tun Copper Kettle Whirlpool Porteus Mill System Scada Control System 100hl FV x 4 200hl FV x 3 200hl MV x 6 200hl Bright Beer Tanks x 2 50hl Rough Beer Tanks x 2 50hl Bright Beer Tank FV 50hl Schenk Filtration System Yeast tanks x 5 CIP System x 2 Heat Exchanger x 5 Stainless Steel mixing tanks Stainless Steel buffer tanks Spirax Condensate recovery x 2 Babcock Wanson Steam Generator Abac Air Compressor Water Treatment Plant Various Stainless Steel Pumps Laboratory Equipment CO2 Tank Glycol Chiller

2 x KRONES SPIRIT / WHISKEY FILLING LINES LINE 6: CAPACITY: 6,600 BPH ON 1.75 LTR BOTTLES Line Suitable for: 50cl, 70cl, 75cl, 1ltr, 1.5ltr, 1.75ltr LINE 7: CAPACITY: 12,600 BPH ON 70CL BOTTLES Line Suitable for: 50cl, 70cl, 75cl, 1ltr Location: Glasgow, UK.

Capping heads Zalkin different closure sizes

LINE FOR FILLING EDIBLE OIL IN 1,0 LTR. PET BOTTLES Capacity: 6,000 hph x 1.0 L conisting of: Blower KOSME KSB 3000 – 2001. – 2 pcs x 3,900 fph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. - 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filler and capper – ICS-Slovenia - 1995 – 6,000 L/h Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3x5 bottles – ICS – 1995 Shrink wrapper SMIPACK-packer in foil 2x5 bottles – 2013 Pallet wrapper ZLATOROG-Slovenia – 1999 KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth approx. 30.000.- EUR It has complete technical documentation Required space for eq ...

One Way Filling line for Beer Capacity: 4000 bph Installed for 0,33 liter Stubby Bottle, 0,33 liter Steinie Bottle Holdefleiss 24 head counter pressure filler with 6 head crowner model early 70. Fimer Rinser 16 head 3-4000 bph. Year? (From kahl Schlichterle 2016) Gernep Labetta labeler 6-480 SK 3-4000 bph. Year 1996? Depall. Dansk Maskinmontasje 2016 Side Grib Conveyor, Carry Line 2016 Bottle conveyors. Dansk Maskinmontage 2016

Klinger bottle washer, year of construction: 2000, capacity approx. 10,000 bottles / hour, Siemens S7, liter cell, currently on 330 ml + 500 ml + 500 ml swing-top bottle. Bottle diameter: 50 - 90 mm / Bottle height: 110 - 330 mm. Klinger Bottle washer, Year: 2000, Capacity approx. 10,000 bph, Siemens S7, 1.0 liter pocket cell, currently used for 330 ml + 500 ml. Bottle diameter 50 - 90 mm / Bottle hight: 110 - 330 mm.

Filling/Seaming machine for carbonated drinks. Filler has 32 filling heads and seaming machine has 6 heads. Seaming machine FERRUM includes lids feeder "ROTOFEEDER" Speed of the machine is 15000 CPH/500 ml. Lids 202 Machine will be reconditioned in 2023

Depalletizer is used for unloading new bottles, delivered on pallets. After clamping one whole row from bottles layer by gripping head, the device delivers them to the unloading table, and the bottles are transported to the washing machine or filling machine. The device is designed to work independently in line, for glass and plastic bottles with different capacity. Depalletizer DNB-2022 consists of four components: 1. spring mobile wire rope hoist 2. a gripping head adapted to the type of bottles 3. table - unloading conveyor / adapted to the type of bottles, pallet and the room for the assembly of the depalletizer. 4. a beam made of structural steel attached to the ceiling of the room or mounted on supports. Capacity up to 6 000 bottles / hr. - Operation - 1 person - Dimensions of bottles: - diameter 20 to 120 mm - height from 50 to 350 mm - Lifting height to ...

Tetra Pak Conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 Meters with straight pieces and curves

Polyketting Conveyor belts - conveyors with min. 19 pieces frequency controlled motors for Tetra Pak beverage cartons Approx. 100 meters

Polyketting Conveyor belts - conveyors with min. 19 pieces frequency controlled motors for Tetra Pak beverage cartons Approx. 100 meters

Tetra Pak Conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 Meters with straight pieces and curves

- Standard machine, with glue pallets - With thermo-shrink head - With bottle conveyor and accumulation table at the exit - Mobile machine, on wheels - In good working order

For sale: Cardboard Packer Meurer CM/TP 25-B 400. The machine worked in the Tetra Pak line. Carton type: 1000 ml Prisma on request, I will send a description of the machine and photos.

Labeller, make Krones, type: Universella 600-15-8-6-130, 2 aggregates for cold glue label at body, shoulder, back; Videojet dating built 1995

Labeler, make Krones, type: Variomatic, for 12.000 bph, adjust to 0,5 lt. and 0,75 lt. bottles, with 3 aggregates, for Body- shoulder and back label, as too with additional label dispenser for self-adhesive labels, with around safety casing, built-on control cabinet, year of origin: 1998

Labeler, make Krones, type: Prontomatic 720-21-8-8-110 RM, for 0,7 lt GdB bottle, for 24.000 bph, for body-, shoulder- and back label, right -> left counter clockwise, with 2 heated glue pumps, built 1997