We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 110)
used
3 UNITS/SETS OF ATT0037 PACKED TOGETHER. A SINGLE ATT0037 CORRESPONDS TO: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 550 x 350 x 110 mm; Approx. Weight: 70kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0037 PACKED TOGETHER: 550 x 1050 x h110 mm - 210 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43154-171
used
4 UNITS/SETS OF ATT0007 PACKED TOGETHER. A SINGLE ATT0007 CORRESPONDS TO: 6 Freutek ISO30-ER32 tool holder cones, balanced, up to 30,000 rpm, lubricated in sealed bag and single pack. Machine condition: unchecked. Approx. Transport dimension: LxWxH 365 x 65 x 150 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x ATT0007 PACKED TOGETHER: 365 x 260 x h150 mm - 20 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43154-147
used
range of reamers and twist drills; different sizes and lengths Auction-ID: A7-44480-304
used
Complete set of parallel pads with different dimensions, see photos for more details Auction-ID: A7-44480-50
used
Serial Number: 180100608, Airflow: 1100m3/h; Engine Output: 1.5kw; for more details see photo of nameplate Auction-ID: A7-44480-88
used
- including liquid pump, grease pump and parts. - On 1 pallet. Auction-ID: A1-43301-207
used
Including seals and bearing rings, belts, parts fixtures, machine parts, fasteners, steel shaft with gear,... on 6 pallets. Auction-ID: A1-43301-351
used
Large range of thread inserts, different sizes and makes Auction-ID: A7-44480-317
used
A total of 3 pieces of different design, see photos for more details Auction-ID: A7-44480-239
used
3 UNITS/SETS OF ATT0013 PACKED TOGETHER. A SINGLE ATT0013 CORRESPONDS TO: 6\" Hydraulic pressure 4500 kg. Material: cast iron, Model: full size, Use: lathe Machine condition: unchecked. Approx. Transport dimension: LxWxH 640 x 240 x 155 mm; Approx. Weight: 48kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0013 PACKED TOGETHER: 640 x 720 x h155 mm - 144 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-43154-52
used
Auction-ID: A1-44284-137
used
- Diameter: approximately 93cm. - Width: approximately 40cm. Auction-ID: A1-43301-223
used
of which 2x sprocket Auction-ID: A1-43301-129
used
including 4 hydraulic pumps Auction-ID: A1-43301-289
used
Assortment of finishing milling cutters in different sizes and designs Auction-ID: A7-44480-214
used
Hydraulic machine viseJaw width 150mmJaw height 50mmClamping range 300mmsee pictures Condition: untested (6) Auction-ID: A7-44325-598
used
Dimensions each approx. 1300x770x2000, see photos for more details Auction-ID: A7-44480-164
used
Cross table with swivel plateTable length 600 mmTable width 240 mmx-way 370 mmy-way 130 mmTable height 165 mmWeight 60 kgDimensions L x W x H 0.8 x 0.45 x 0.2 mm Condition: never used / new (5) Auction-ID: A7-44325-543
used
Jaw width 175mmJaw height 50mmWingspan 170mmsee pictures Auction-ID: A7-44325-630
used
Drawer contents consist of assortment of collets in different sizes, see photos for more details Auction-ID: A7-44480-222
used
Item number:07-100-0695-00:02 Auction-ID: A7-44480-139
used
including wheels, hydraulic hoses, brass bushings, couplings,. on 5 pallets Auction-ID: A1-43301-166
used
Shelf equipped with assortment of screw clamps and angle stops for welding work; see photos for more details Auction-ID: A7-44480-71
used
Dividing table with jaw chuckDiameter 200 mmHeight 105/265 mmCenter height 105 mmMachine weight approx. 41 kgDimensions approx. 400 x 330 x 310 m Condition: never used / new (5) Auction-ID: A7-44325-508
used
Drill viseJaw width 100 mmClamping range 100 mmClamping height 40 mmWeight 9 kgDimensions L x W x H 290 x 130 x 65 mm Condition: never used / new (5) Auction-ID: A7-44325-459
used
Assortment of twist drills in different lengths and diameters, more details Photos Auction-ID: A7-44480-18
used
including large batch of SKF 353024 B bearing parts, hydraulic cylinder Auction-ID: A1-43301-118
used
including 6 hydraulic cylinders, Stöber geared motor... in 5 metal boxes Auction-ID: A1-43301-102
used
Auction-ID: A1-43301-216
used
Ø 250/360mm, 250 bar, projection 620mm Auction-ID: A1-43301-271