Manufacturer:
(Category: 108)
table length: 3000 mmtable width: 1500 mmtable height: 850 mmside-clamping surface:: 200 (Höhe) mmweight: 1518 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drilling surface 100x100 mm grid- Rounded corners, edges and holes- Height of side wall 200 mm- Distance between holes in side wall 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Special set - including 28 tool set 3Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 3000 x 1500 x 200 mm- Plasma nitrided version with scale- incl. 6x base equipment- incl. 28 tool ...
table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 1069 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! The welding tables are provided with a scale as standard.Special set - including 28 tool set 3Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 28 mm- Surface holes in a diagonal grid- Rounded corners, edges and holes- Height of side wall 200 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresPlasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimension ...
table length: 2400 mmtable width: 1200 mmtable height (lateral area): 100 mmweight: 537 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Distance between holes in side wall 25 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Special set - including tool set of 16 3Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 16 hole pattern / dimensions 2400 x 1200 x 100 mm- Plasma nitrided version with scale- including 6x base equipment- incl. 16 tool set 3:+ 8x 160610.N c ...
table length: 2000 mmtable width: 1000 mmtable height (lateral area): 100 mmweight: 354 kg SIEGMUND authorized dealer - all items available! Product description- high quality steel S355J2 + N + plasma nitriding- Material thickness approx. 11.5 - 13 mm- Hole Ø 16 mm- Holes surface 50x50 mm grid- Rounded corners, edges and holes- Height of side wall 100 mm- Distance between holes in side wall 25 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Special set - including tool set of 16 3Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 16 hole pattern / dimensions 2000 x 1000 x 100 mm- Plasma nitrided version with scale- Including 4x basic equipment- incl. 16 tool set 3:+ 8x 160610.N ...
table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 981 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Sidewall made of high quality steel S355J2 + N + plasma nitriding- Hole Ø 28 mm- Drilling surface 100x100 mm grid- Rounded corners, edges and holes- Height of side wall 200 mm- Drill holes in the side wall in a diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise structuresThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 2400 x 1200 x 200 mm- Extreme plasma ...
table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 949 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Item No.: 4-280030.XD7D.1 Product description- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Sidewall made of high quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Drilling surface in diagonal grid- Rounded corners, edges and holes- Side panel height 200 mm- Holes in the side wall in the diagonal grid- Including scaling on the surface- Structure reinforced with ribs- Grid lines allow for precise buildsThe welding tables are provided with a scale as standard.Plasma nitrided version :- Protection from rust/scratches/weld spatter adhesion- more corrosion resistant / higher load capacityFurnishing:- 28 hole pattern / dimensions 2400 x 1200 x 200 mm- pl ...
weight max. in kg: max. 1000 kgturning speeds: 0,18 - 0,58 U/minheight: 976 - 1436 mminclination: 0 - 115 °table diameter: 895 mmvoltage: 380 Vtotal power requirement: 2,0 kWweight: 685 kgrange L-W-H: 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW Special price on requestThe AK BEND SRH hydraulic welding positioner is idealfor welding, assembly and maintenance work. Positioning is done via ahydraulic rotation and tilting function.Description:- electro-hydraulic turning and tilting function- Fast handling of workpieces- Maximum productivity thanks to optimal working position- Lifting, tilting and turning workpieces in one clamping- Low idle times thanks to turning components- Maximum work performance thanks to comfortable working- Back-friendly working for the userEquipment:- Continuously variable speed adjustment- Freely movable foot ...
table length: 2400 mmtable width: 1200 mmtable height (lateral area): 200 mmweight: 981 kgdimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description- High-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Bore diameter 28 mm- Surface holes with a 100x100 mm grid- Rounded corners, edges, and holes- Side panel height 200 mm- Side panel hole spacing 50 mm- Surface scale included- Construction reinforced with ribs- Grid lines enable precise setupsThe welding tables are equipped with a scale as standard.Plasma nitrided finish:- Protection against rust, scratches, and weld spatter adhesion- More corrosion-resistant / higher load capacityFeatures:- 28-hole pattern / Dimensions: 2400 x 1200 x 200 mm- Plasma nitrided finish (750) with scale- Includes 4x base feetThe data for this ad was created with ModulMW ...
table length: 3000 mmtable width: 1500 mmtable height (lateral area): 100 mmweight: 726 kgThe welding tables are provided with a scale as standard.Plasma nitrided version:- Protection against rust / scratches / weld spatter adhesion- more corrosion-resistant / higher load capacityEquipment:- 16 hole pattern / dimensions 3000 x 1500 x 100 mm- Plasma nitrided version Professional 750 with scale- Including 8x basic equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
volume capacity: 1600 m3/hfeed volume: 99,9 %length: 3.000 Absaugschlauch mmmotor: 230 Voltmotor: 1,1 KWweight: 80,0 kgrange L-W-H: 580 x 580 x 900 mmDescription:The filtoo filter device newly developed by TEKA isa mobile filter system that manyTasks in the field of filtration ofSmoking, dusts and gases can be used.Also suitable for high-alloy steels (stainless steel).(the device was based on DIN EN ISO 15012-1 (2005)tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140)for welding smoke class W3 (degree of separation:> 99.9%))Where can the SIG 230 filtoo be used?- at welding workplaces- in the workshop area- for soldering applications- with restorers- in locksmithsFurnishing:- BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals- Operating instructions in Germanoptional equipment for a surcharge (recommended)- Retrofi ...
table diameter: 500 mmtable load: 300 horizontal kg.table load: 150 vertikal kg.swivelling range: 0 - 90 Gradturning speeds: 0,2 - 2,5 U/minbore: 90,0 mmtable height: ~ 650 mm mmmotor: 230 Voltweight of the machine ca.: 90,0 kg.range L-W-H: 385 x 340 x 375 mmFurnishing:- The table can be tilted and clamped at an angle of 0 ° to 90 °- manual tilting- Start / stop via location-independent foot switch- Direction of rotation can be selected right / left- Adjustable rotation time- The control of the welding machine via control- 350 amp ground connectionScope of delivery:- control (integrated)- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 340 mmtable load: 290 horizontal kgtable load capacity: 190 vertikal kgturning speeds: 0,6 - 6,0 U/minspindle bore: 60,0 mmswivelling range: 0 - 90 Gradweight of the machine ca.: 62 kgdimensions of the machine ca.: 380 x 340 x 425 mmFurnishing:- The table can be tilted and clamped at an angle of 0 to 90- Start / stop via a location-independent foot switch.- Direction of rotation can be selected right / left.- Adjustable rotation time.- The turntable has a 60 mm hollow shaft.- The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter.- The table speed is adjustable from 0.6 - 6 rpm.- The control of the welding machine via the turntable control is possible.- The ground contact transmits 300 A / 100%.- The turntable and the control are separate.- HF protected.- Operating instructions in GermanFunctions of the COM 1000 con ...
cutting range for steel to: 35.0 TS mmcutting range for steel to: 25.0 QS mmampere: 20 - 65 Amperecutting medium: Druckluft voltage: 400 Voutput: Eingang 7.8 KWweight: 51.5 kgrange L-W-H: 595 x 250 x 890 mmAvalon 65 AIR with integrated compressorCutting - clean and reliableThe air plasma cutting system Avalon 65 AIR with integratedCompressor is your reliable partner for the demandingMission. Make separation cuts up to one with the Avalon 65 AirMaterial thickness of 18 mm.Characteristics :- IGBT technology- with integrated compressor- Microprocessor control system for excellent and dynamic. Arc properties- CNC interface- HF-free arc starting system for increased reliability. and low EMF exposure- Manual switch to activate airflow around test air pressure. without having to trigger the burner- Intelligent protection function protects the plasma torch. from damage such as incorrect air pres ...
table load: 1000 kgtable diameter: 900 mmturning speeds: 0,12 - 1,2 U/minswivelling range: 0 - 135 Gradspeed: Kipp 0,35 U/minwelding current: 500 Adimensions of the machine ca.: 1475 x 1050 x 900 mmFor heavy industryWhen choosing a turntable, it is essentialTurning and tilting torque must be taken into account. To noteapplies to how far the center of gravity of the workpiece is from theThe faceplate is away or how far the center of gravity isis eccentric from the center. By means of aRotary and tilting tables can be used to optimize workpiecesposition for welding.- Robust construction.- Infinitely variable.- Hand remote control.- HF protected.Furnishing :- 1 control (integrated)- 1 wired remote controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gun: PH-3N, voltage: 400V, weight: 50kg. Supplied with operating manual, 2x ground cables with clamp BMS/BMK, gas connection, HZ-stud holder, adapter piece and key. An on-site inspection is possible.
Farmer EL2100 Welder 230 and 400V With cooling fan and driving equipment
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: ARO Type: M 302 Year of Make: 1971 No. 1063655 380 V ~ 50/60 Hz E 100 100 All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Welding Machine Type: Roll Seam Welding Machine Manufacturer: Nimak Type: NMP 7/100 Year of Make: 1971 Machine No. 71059 Rated power: 100 kVA at 50% ED Connected load: 175 kVA Primary voltage: 380V Open circuit voltage: 7.3V Sec. Str. dd/max. 8/33 kA Electrode force: 750 kp Frequency: 50 Hz up to 8.8 V at 6 ATU All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".
Spot welding gun --- Rated power at 50%ED: 22kVA Short circuit current: 17kA Electrode force: 360daN / single stroke Projection: 95mm --- - Electrode arm AE/2/96g + C34/2/63g --- Welding control: on request --- Spring balancer on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
Key data: 25 kp, 150 , 120
Rated power at 50%ED: 25kVA Short-circuit current: 12kA Electrode force: 120daN / single stroke Projection: 150mm --- Welding Control: AR.01 (5 times, 2 program) --- Incl. additional options: -Foot switch -Main switch - Mounted on aluminium plate --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
Key data: 63 kp, 750 , 600
Rated power at 50%ED: 63kVA Short-circuit current: 26.3kA Electrode force: 65-390daN / single stroke Throat: 450-750mm --- Welding control: MPS 15036 (5 times, 1 program) --- Incl. additional options: - Footswitch with "de-energized" touchdown -Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
MOST MWOS-A5 tank welding machine was built in 2023 in Poland by RYWAL-RHC Sp. z o.o. This highly versatile machine is designed for fully automatic welding of industrial products, i.e. machine parts, pressure vessels and heat exchangers. Circumferential, angle and full-value longitudinal joints are performed by means of two reliable torches in the MIG/MAG method. This solution significantly increases production efficiency, while maintaining the repeatability of the process. All this is complemented by the advanced MCS-X control system with an intuitive interface, which enables the creation of entire production processes in just a few steps. The MOST MWOS-A5v02 circumferential welding machine weighs 3200 kg. Technical specifications of the MOST MWOS-A5 circumferential welding system - working length: 4500 mm - maximum workpiece diameter: 1500 mm - maximum workpiece weight: 5200 kg ...
KAWASAKI BA006L-A robotic welding cell was built in 2021. The system is designed for fully automatic MIG/MAG arc welding. All the necessary equipment and machinery with the best technical specifications are integrated inside an enclosed, fully ventilated structure. The robotic welding station consists of the following components: – robot arm: KAWASAKI 3BA006L-AC01 – welding positioner: ASTOR PST250E-H1 (2 pcs.) – MIG/MAG welder: FRONIUS TPS 400i – wire feeder: FRONIUS WF 25i REEL R /4R/G/W – push-pull drive unit: FRONIUS WF 60i Robacta Drive CMT/W – cooling unit: FRONIUS CU – welding fume extraction unit: KEMPER FilterCell XL (2 pcs.) – light curtains: SICK – fixed covers with safety switch The machining process is performed by a KAWASAKI 6-axis robot, distinguished by its sophisticated design and robust arm with an increased range of movement. It coopera ...
KAWASAKI BA006L-A robotic welding station was built in 2022. This system, composed of devices and machines with the best technical parameters, is the perfect choice for fully automatic arc welding using the MIG/MAG method. All the components of the station are integrated inside an enclosed structure. The machining process is performed by a KAWASAKI 6-axis robot distinguished by, among others, its sophisticated design and robust arm with an increased range of movement. In order to achieve excellent dynamic movements combined with high process reliability, each of its six axes is driven by efficient servo motors. What’s more, a number of state-of-the-art systems ensure uninterrupted operation of the machine, without any downtime. The entire workspace is ventilated from welding fumes by powerful KEMPER extraction units. This solution significantly improves overall safety and comfort ...
A medium-frequency spot welding machine Dalex-Werke is available. Throat depth: 350mm, electrode stroke: 90mm, electrode holder diameter: 30mm, electrode taper: MK2, rated power at 20% duty cycle: 180kVA, max. welding power: 200kVA, primary voltage: 400V, rated frequency: 1000Hz, electrode force: 20daN–600daN. Weight: approx. 575kg, control: HWS 2102. Documentation available. An on-site inspection is possible.
A CNC 6-axis laser precision machine for non-contact laser processing and measurement of complex geometries, particularly in the tool and mould making industry, is available. Travel X/Y/Z: 300mm/400mm/500mm, table dimensions X/Y: 300mm/400mm, axes mechanical/optical: 3/3, measurement system: non-contact SI sensor, measurement accuracy: +/-0.01mm, surface finish: Ra under 1µm, operating hours: 21045h, processing hours: 6549h. The laser (Prisma) is defective. Documentation available. An on-site inspection is possible.
Peco Welding Machine Spot Welding Machine Peco welding system welding of flat strip and electr. Management Peco LA 40 Air Control Bosch E35... DYF welding control You can find more welding systems in other sizes - new and used - in our shop! International shipping costs on request!
welding current: 20 - 100 Acutting capacity: max. 35mm mmopen-circuit voltage: 250 VRequired air-pressure: min. 4 barconnected load: 20 KVAconnected load frequency: 400 Vweight: 0,7 kgDimensions (LxWxH): 1,0 x 0,6 x 0,8 mmPlasma cutting machine with cart- Includes 7m hose package- Spare nozzlesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
welding current: 30 - 100 Acutting capacity: max. 50mm mmopen-circuit voltage: 170 VRequired air-pressure: min. 4 barconnected load: kWconnected load frequency: 400 Vweight: 0,75 kgDimensions (LxWxH): 1,2 x 0,7 x 1,0 mmPlasma cutting machine with cart- 105 RTX torch- Includes 7m hose package- Spare nozzles- Like new, ready for immediate useThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
