Üretici:
(kategori: 108)
Kaynak: TruPulse 124 Lazer ışığın dalga boyu:1064 nm Maksimum ortalama güç: 140 W Minimum darbe çıkışı: 300 W Maksimum darbe gücü: 6 kW Minimum darbe süresi: 0.3 ms Maksimum darbe süresi: 50 ms Maksimum nabız enerjisi: 30 yıl Maksimum darbe tekrarlama hızı:833 Hz Işin parametre çarpımı: 16 mm-mradX-ekseni:450 mm Hız: 3000 mm/dakika Konumlandırma doğruluğu:± 0,05 mm Tekrarlanabilirlik:± 0.02 mm mm eksen:300 mm Hız: 3000 mm/dakika Konumlandırma doğruluğu:± 0,1 mm Tekrarlanabilirlik:± 0.02 mm Z ekseni: 300 mm Hız: 3000 mm/dakika Konumlandırma doğruluğu:± 0,05 mm Tekrarlanabilirlik:± 0.02 mm Döner eksen Pikap: 120 mm Serbest iç çap: 45 mm Maksimum hız: 80 rpm. Üç çeneli çakmanın çapı:80 mm Merkezi geçitler: 16 mm sıkıştırma menzili, iç kısımlar: 2-71 mm Dı ...
Equipped with: foot control with emergency button, 220v, Auction-ID: A1-47349-75
: neu : ca. 2 - 4 Wochen ab Auftr : 1490 €: 1500 x 1000 mm: 850 mm: 344 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load capacity 50 ...
: neu : ca. 4 Wochen ab Auftragse : 1940 €: 2000 x 1000 mm: 850 mm: 449 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load capacity 50 ...
length:1200 mmheight:800 mmweight of the machine ca.:150 kgdimensions of the machine ca.:1200 x 600 x 800 mm
plate thickness:15 mmtotal power requirement:13 A 9 KVAweight of the machine ca.:50 kgdimensions of the machine ca.:1000 x 400 x 650 mm
cutting range for steel to:20 mmtotal power requirement:3~ 220 / 380 Vweight of the machine ca.:100 kgdimensions of the machine ca.:500 x 750 x 1000 mm
cutting width:2500 mmNumbers of torche:2 Type of gas:Sauerstoff, Propan total power requirement:2 kWlength:6000 mmcontrol:KS 20 A Messer Griesheim Documents:vorhanden
table width:2300 mmtable length:7000 mmburner heads:1 Plasma -Schneidk. burner heads:2 autogene Schneidköpfe control:NBS 400 Documents:vorhanden
: neu : ca. 2 - 4 Wochen ab Auftr : 995 €: 1200 x 800 mm: 150 kg: 16 mmTHIS MODEL IS DESIGNED FOR BEGINNERS AND FOR PROCESSING LIGHTER AND SMALLER WORKPIECES.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.2D standard welding and clamping table,1200 x 1200 with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid standard table legs with load capacity 1 tonne per leg, 500 kg per leg for castor modelThe data for this ad ...
This inverter model has the latest functions and features to successfully complete welding work. The inverter is user-friendly and efficient and thus a valuable addition to the workshop of the professional welder or solder. The high-frequency ignition on this inverter makes it possible to use the device without having to stroke the electrode during stick welding. The robust handle also gives you more grip during heavy work. In addition, this makes it a lot easier to take the tool with you for working on location. The inverter housing is also extremely strong, so vibrations and even unexpected contact with other devices or components do not have a negative impact on operation or durability. Auction-ID: A1-40275-138
weight of the machine ca.:150 kgdimensions of the machine ca.:1200 x 600 x 800 mm
Rated Input Voltage: 3P AC380V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 85% Insulation class: F Protection class: IP21 Weight: 43 kg Insulation value: F Protection value: IP21 MIG TIG MMA - Input power (KVA) 13.8 10.5 11.8 - Input current (A) 21 16 18 - No-load voltage (V) 80V 80V 80V - Output current (A) 40-350 10-350 30-300 - Output voltage (V) 31.5 24 32 Auction-ID: A1-40275-133
Water-cooled multi-process welding machine Functions: MIG/MAG, TIG & MMA Adjustable amperage: 30-350 amps duty cycle: 60% duty cycle (250 A) Equipped with: LCD color display Equipped with: water cooler for MIG/MAG torch Includes: water-cooled MIG/MAG torch Including: TIG torch with accessories Includes: Electronic gas regulator Connection: 380 volts Technology: IGBT Technology Protection: circuit breaker Including: manual Condition: unused, in the original packaging Auction-ID: A3-43557-740
Includes cabinet key and operating key, Please note: The video is for illustrative purposes only, as are the photos of the screens turned on. Auction-ID: A1-48200-203
: neu : ca. 2 - 4 Wochen ab Auftr : 2697 €: 2000 x 1000 mm: 3000 kg: 348 kg: 100 mm: 12 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,2000 x 1000 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes S ...
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 24400 €: 468.48 €: 3000 kg: 150 mm: 150 mm: 360 °: 135 kgm: 400 / 50 V / Hz: 1.1 kW: 1.1 kW: 1200 mm: 700 - 950 mmThe hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted to the floor.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.The rotation speed can be adjusted via a potentiometer.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 7730 €: 149.19 €: 500 kg: 150 mm: 150 mm: 360 kgm: 230 / 50 V / Hz: 0.37 kW: 0.37 kW: 0.1 - 3 U/min: 45 s: 800 mm: M20X6 mm: 640 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, segmentcyc ...
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 11000 €: 211.2 €: 1000 kg: 150 mm: 150 mm: 360 kgm: 230 / 50 V / Hz: 0.55 kW: 0.75 kW: 0.1 - 3 U/min: 60 s: 1200 mm: M20X6 mm: 1000 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, segment ...
50 € 
