table diameter: 1300 mmtable load: 7,0 tswivelling range: 0 - 110° deg.table rotating: 360° deg.table turning speeds: 0,1 - 0,9 U/minheight adjustment: 1040 - 1740 mmtable drive: 2,2 kWhydraulic motor: 2,2 kWtotal power requirement: kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,80 x 1,55 mHydraulic welding rotating and tilting table.- Adjustable speed- Remote control with a cable length of 5 meters- Digital speed display on the control panel for monitoring the rotation- Motors with brakes- Mechanical angle display (for tilting) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: - max. Load capacity 750 kg - Face disc diameter 750 mm - Hollow continuous spindle 65 mm - Face disc motorically swivel 0 - 90 ° - Rotational movement electr. infinitely variable 0.05 - 2.0 m/min - Right - + Left - Run - E. – Foot switch + hand remote control - Welding current transmission approx. 500 A - Drive 400 V - Table height with horizontal position 1050 mm - 3. Cheek lining - Space requirement approx. W 1600 x H 1050 x D 1600 mm - Weight approx. 400 kg
Mot. Welding turning and tilting table Make: DEUMA Type: DK 5000 S Machines - No.: 6890 Built: 1992 Offer number: 19110 Technical data: - max. Load capacity 5000 kg - Flat discs 1800 x 1300 mm - Flat disc hydr. swivel 0 - 90 / 135 ° - Rotational movement infinitely adjustable approx. R&din - Right - + Left-hand drive controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height at horiz. Position approx. 1450 mm - E. hand-held remote button - Space requirement approx. W 2000 x H 1450 x D 3100 mm - Weight approx. 4000 kg
Specifications: - max. Load capacity 10000 kg - Flat discs 1400 x 1400 mm - Flat disc hydr. swivel 0 - 90 / 135 ° - Rotary movement infinitely variable 0.05 - 1.2 rpm - Right - + left-hand running controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height at horiz. Position approx. 2500 mm - E. handheld remote button - Space requirement approx. W 2000 x H 2500 x D 2700 mm - Weight approx. 5200 kg
Welding rotator DEUMA type KDT 25000 Maxi loading capacity: 25 T Titl: from 0 to 135° Superior plate dimensions: 2000 x 2000 mm (without cast steel bed) With one cast steel bed specially adapted to the rotator plate Cast steel bed dimensions; (L x W x H): 3000 x 2450 x 115 mm - weight: 6,5 T NEW Electrical Panel Voltage: 380 V Dimensions (L x W x H): 5100 x 2400 x 2100 mm Weight: 14 T
Technical data: -max load capacity 3000 kg -Faceplate cross 1600 x 1600 mm -Faceplate cross extension tubes - faceplate cross mot. adjustable 0-90 / 135 ° - rotation infinitely variable 0,01-4 U/min -Right - + rotation control -Transmission of welding current approx. 500 A -400 V - table height in horiz drive. Position without stand approx. 1200 mm -Table height at horiz. Position with frame approx. 2200 mm -Space requirement approx. B H 1600 x 1200 + 1000 X 2400 mm -Weight approx. 2700 kg
Faceplate speed level 1: 0.005 0.25 Faceplate speed level 2: 0.019 1.02
table diameter: 900 mmtable load: 1 tswivelling range: 0-135 Gradexcentricity: 200 mmtable turning speeds: 0,12 - 1,2 U/minTorque: 2000 N/mtotal power requirement: 0,75 kWdimensions of the machine ca.: 1,5 x 1,020 x 0,9 mThe D-HB tilt and turn tables are very stable due to their heavy constructionand therefore particularly suitable for heavy and precisePositioning activities and circular welding work.Features:- Easy installation- Increase in production is made possible- Improvement of the welding quality through optimal positioning andCruise control- Reduction of crane hours and handling time, during which theImproved occupational safety.- Self-locking gear, therefore no leading and trailing behind with eccentricburden- Electronic components from Schneider, Siemens and Delta- Frequency-controlled stepless speed of the turntable- High stability due to the robust construction- CE certifica ...
table diameter: 600 mmtable load: 250 kgtable - swivable +/-: 90 °total power requirement: kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 1x0,5x0,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data: -Load capacity 300 kg -Faceplate diameter 500 mm -Faceplate in grid levels of tilt - rotation Electr. infinitely variable approx. 0-1.2 m / min -Sweat power 650 A -Drive 220 V / 0.09 kW -Table height in horizontal position approx. 650 mm -Re + reverse - space requirement approx. B H 800 x 650 X 700 mm -Weight approx. 180 kg
Specifications: - Load capacity 100 kg - Face disc diameter 400 mm - Faceplate infinitely tiltable - Table height with horizontal position approx. 470 mm - Rotational movement electr. infinitely variable 0 - 2.5 m/min - Welding current transmission 400 A - Drive 400 V - Right - Left rotation - Foot switch with foot roller controller for speed regulation - Ground cable - Space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg
Welding turning and tipping-positioning table Technical data: -Load capacity at horizontal position 15000 kg -Load capacity in vertical position 10000 kg -Planpauc diameter 1850 mm -Plane disc with crane support can be swivelled continuously -Rotary motion electr. infinitely controllable -Right-Link Run -Drive 400 V -Ft remote taster -Massea cables -Welding current transmission 500 A -Table height at horizontal position 1850 mm -Space requirements approx. B 2450 x H 1850/2300 x T 3000 mm -Weight approx. 6000 kg
Technical data: -Load capacity 30 kg -Faceplate diameter 280 mm -Faceplate swivel - faceplate RPM elect. infinitely variable - re + Li - run -Foot switch -Transmission of welding current 300 A -Drive 220 V - table height in horizontal position 360 / 890 mm -mobile base -3 jaw Chuck -Space requirement approx. B 550 x H 890 x T 550 mm -Weight approx. 50 kg
Technical data: Table load 40 to. Table diameter 3,330 mm Speed 0.01 0.2 U/Min. Voltage 400 V / 50 Hz Power 6 KW To the weight of the table 15. Dimensions L x W x H 5,600 x 2500 x 3,200 mm
offer 21388 Specifications: - Load capacity 1500 kg - Face plate dimensions 950 x 950 mm - Face plate can be swiveled up to 135 ° via gear motor - Rotary movement electr. infinitely variable - Foot switch for right-hand rotation - Welding current transmission 650 A - Drive 400 V - Table height at horizontal position 930 mm - Space requirement approx. W 1200 x D 1800 x H 930 mm - Weight approx. 0.9 t
serial number: 210 table load: max. 500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Clamping device with 3 pcs claw box double acting to compensate for material elongation during welding or heat development by working process New condition of the three claw boxes with screwed-on Interchangeable plate jaw system and hardened screwed clamping jaws . Size : Claw box; approx. 50 cm x 25cm (box) x 15 cm movable support part: approx.31 x23 cm Alternate plates size approx. 31 x 23 cm x height from 18 to 23 cm Spindle adjustment path. approx. 130 mm , voltage by spindle with compression spring preload system Accessories: 6 sets of alternating plate jaws as good as new
