british flag
Resale Logo

Category 108: welding machines

back back back
 banner advertisement information used machine tools  Eberlei Maschinenhandel  http://www.eberlei-maschinen.de 
banner logo
start page > metal working machines > all welding machines > results
 
1122 offers order by
post used machinery: registration     
No. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
page 1 > 2 3 4 5 6
125823241
REIS SRV6L
Welding Robots

incl. cabine start-up hours 54366
used machine
 
incl. cabine
start-up hours 54366
2005
13,900 €  
    request
125789658
IDEAL DSF 090

1995
2,850 €  
  DE   request
125776211
ZDIS GLIWICE YUN 4000-2
Welding Machines

Oxygen burner ZDIS GLIWICE YUN 4000-2 was built in 2004 by ZDIS Gliwice. Numerically controlled, the YUN 4000-2 thermal cutter is designed for curvilinear oxygen cutting of carbon and low alloy steel sheets. Technical ...
used machine
 
Oxygen burner ZDIS GLIWICE YUN 4000-2 was built in 2004 by ZDIS Gliwice. Numerically controlled, the YUN 4000-2 thermal cutter is designed for curvilinear oxygen cutting of carbon and low alloy steel sheets.

Technical parameters :
- table dimensions: 15x3 m, it can be shortened because it is modular
- two oxygen burners and additionally a third burner with plasma routing
- maximum cutting width: 4000 mm
- flammable gas: acetylene
- power consumption: approx. 1.5 kVA
- compressed air: min. 0.4 MPa, max. 20 m3 / h
- water: min. 0.1 MPa, max. 0.12 m3 / h

The cutter includes the following main assemblies:
- roadway
- trolley with longitudinal and transverse drive units
- gas installation
- microcomputer MUS control system
- ZSP steering team
- oxygen supports: 2 items
- power supply installation
- dimensions of the trolley with longitudinal and transverse drive units (W x H x D): 5450 x 1675 x 2500 mm, weight: 1400 kg
- dimensions of the roadway (length x height x rail gauge): 14000 x 600 x 5000 mm, weight: 1800 kg
- GCE machine burner with valves and fuses and a set of nozzles for cutting thickness from 3-150 mm: 2 sets
- DTR (technical and operational documentation)

Additional equipment for the ZDIS GLIWICE YUN 4000-2:
- water mist spraying unit: 1 item
- band for edge chamfering at an angle of 0-45 degrees, with straight cuts: 1 piece
- ASTER program to support the work of the technologist in the development of cutting programs: 1 item
2004
24,750 €  
  PL   request
125756468
A + B CNC - Plasma SMART
Plasma Cutting Device

ampere: 120 A Stromquelleampere: 120 A Stromquellecutting range for steel to: 0,3 - 30,0 mm Stcutting range for steel to: 0,3 - 30,0 mm Stcutting medium: 5 - 8 bar Druckluftcutting medium: 5 - 8 bar Druckluftcutting rang ...

 
ampere: 120 A Stromquelle
ampere: 120 A Stromquelle
cutting range for steel to: 0,3 - 30,0 mm St
cutting range for steel to: 0,3 - 30,0 mm St
cutting medium: 5 - 8 bar Druckluft
cutting medium: 5 - 8 bar Druckluft
cutting range: 3.000 x 1.500 mm
cutting range: 3.000 x 1.500 mm
repeating accuracy: 0,2 mm
repeating accuracy: 0,2 mm
connected load: 400 V 50 Hz
connected load: 400 V 50 Hz
traversing speed: 0 - 20.000 mm/min.
traversing speed: 0 - 20.000 mm/min.
weight of the machine ca.: 550 kg.
weight of the machine ca.: 550 kg.
Overall size: 1.900 x 3.500 mm
Overall size: 1.900 x 3.500 mm



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125776057
TEHAG TB 15
Welding Turntables

Load capacity: 15 kg faceplate dimensions: 300 Ã? mm tilting range: hand 360 ° welding power transmission: 400 A space: 700 x 700 x 1000 mm weight: 82 kg
used machine
 
Load capacity: 15 kg faceplate dimensions: 300 Ã? mm tilting range: hand 360 ° welding power transmission: 400 A space: 700 x 700 x 1000 mm weight: 82 kg
1981
Price  
    request
125756472
OERLIKON SAFMIG 400 BLX SW / OEE
Welding Unit

current intensivity: 380 Awelding power: 380 Voltwelding power: 60 % - 320 A Awelding power: 100% - 280 A Aweight: 220 kgdimensions of the machine ca.: 0,8 x 1,0 x 1,3 mThis ad was created with MODUL MWS - the software s ...

 
current intensivity: 380 A
welding power: 380 Volt
welding power: 60 % - 320 A A
welding power: 100% - 280 A A
weight: 220 kg
dimensions of the machine ca.: 0,8 x 1,0 x 1,3 m



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125761615
TRUMPF TruLaser 2030
Laser Cutting Machine

X-travel: 3000mm, y-travel: 1250mm, z-travel: 115mm, max. table load: 470kg, max. speed: 170m/min, laser power: 2000W, length: 11400mm, width: 5500mm, height: 2750mm, weight: 15.1t.
used machine
 
X-travel: 3000mm, y-travel: 1250mm, z-travel: 115mm, max. table load: 470kg, max. speed: 170m/min, laser power: 2000W, length: 11400mm, width: 5500mm, height: 2750mm, weight: 15.1t.
2007
Price  
  DE   request
125740151
Tilting Welding Table
Weight approx.: 80 kgDimensions (l x w x h) approx.: 600 x 600 x 600 mmDescription: Rotary welding table with electric drive, for further details see photos

 
Weight approx.: 80 kg
Dimensions (l x w x h) approx.: 600 x 600 x 600 mm
Description: Rotary welding table with electric drive, for further details see photos
 
used machinery auction RESALE 150 €  
  CZ   request
125745016
MESSER Easytherm 3600
Plasma Cutting Systems

CNC Portal plasma cutting machine Manufacturer: Messer Type: Easytherm 3600 Year: 2005 CNC control: global control Track width : 3.600 mm Work area: 2.500 x 6.000 mm 1 Plasma torch Power source: Kjellberg HiFoc ...
used machine
 
CNC Portal plasma cutting machine
Manufacturer: Messer
Type: Easytherm 3600
Year: 2005
CNC control: global control

Track width : 3.600 mm
Work area: 2.500 x 6.000 mm
1 Plasma torch
Power source: Kjellberg HiFocus 160i
Exhausting table
Filter unit: Torit DFPRO 6

Availability: KW 30/2018

2005
Price  
    request
125730629
CLOOS GLC 403 PA-TS

1990
1,550 €  
  DE   request
125735752
DALEX NIEPENBERG PMS 22-1
Pressure Welding Machine

Elektrode pressure: 1-118kp, connected load: 150kVA, weight: 850kg.
used machine
 
Elektrode pressure: 1-118kp, connected load: 150kVA, weight: 850kg.
1968
Price  
  DE   request
125703055
MB SAF 300
Welder

Weight approx.: 250 kgDimensions (l x w x h) approx.: 550 x 1100 x 1100 mmDescription: See photo

 
Weight approx.: 250 kg
Dimensions (l x w x h) approx.: 550 x 1100 x 1100 mm
Description: See photo
 
used machinery auction RESALE 200 €  
  IT   request
125735750
MASING KIRKHOF MG 23/ 1R-100.2
Pressure Welding Machine

Nominal power: 100kVA, weight: 700kg, including controls.
used machine
 
Nominal power: 100kVA, weight: 700kg, including controls.
1970
Price  
  DE   request
125689161
UWM UWM 3
3 Welding table

Weight approx.: 78 kgDimensions (l x w x h) approx.: 660 x 450 x 480 mmDescription: Welding table with - Foot switch - tilt / swivel by hand - Speed continuously adjustable - Welding current transfer 250 Amp Table diamet ...

 
Weight approx.: 78 kg
Dimensions (l x w x h) approx.: 660 x 450 x 480 mm
Description: Welding table with - Foot switch - tilt / swivel by hand - Speed continuously adjustable - Welding current transfer 250 Amp Table diameter 450 mm Table load 300 Kg Swivel range 90 degrees Speed 0,2 - 2 stepless rpm Table load 300 kg vertical Total power requirement 220 kW Machine weight approx. 0.078 t Space requirement approx. 0.66 x 0.45 x 0.48 m
 
used machinery auction RESALE 1,890 €  
  DE   request
125726492
EPPLE
Clamping Plates

AC 100 Angle vise AC 100 with a span width of 105 mm, jaw width of 100 mm and weight of 11 kg Description For welding different thicknesses at right angles Varying levels (thick) workpieces can be clamped at  ...

 
AC 100
Angle vise AC 100 with a span width of 105 mm, jaw width of 100 mm and weight of 11 kg

Description

For welding different thicknesses at right angles
Varying levels (thick) workpieces can be clamped at right-angles through the swivel axis

Technical data
Jaw width 100 mm
Span 105 mm
Jaw height 60 mm
Dimensions (D x W x H) 300 x 300 x 100 mm
Weight 11 kg
 
80 €  
    request
125689180
UWM UWM 2
2 Welding table

Weight approx.: 65 kgDimensions (l x w x h) approx.: 560 x 420 x 460 mmDescription: Welding turntable with - Footswitch - tilt / swivel by hand - Speed continuously adjustable - 400 amp welding current transmission Table ...

 
Weight approx.: 65 kg
Dimensions (l x w x h) approx.: 560 x 420 x 460 mm
Description: Welding turntable with - Footswitch - tilt / swivel by hand - Speed continuously adjustable - 400 amp welding current transmission Table length 400 mm Table width 400 mm Table load 0.2 t Table diameter 400 mm Swivel range 90 degrees Speed 0.2 - 2 stepless rpm Table load 100 kg. vertical Total power requirement 220 kW Machine weight approx. 0.065 t Space required approx. 0.56 x 0.42 x 0.46 m
 
used machinery auction RESALE 1,590 €  
  DE   request
125673661
TECNA TE90 Mark II
Spot Welding Machines

N: 01517, 400 V, 50 Hz, 16 KvA, weight: 133 kg, with digital display
used machine
 
N: 01517, 400 V, 50 Hz, 16 KvA, weight: 133 kg, with digital display
2014
Price  
    request
125689183
EXPERT
Turntable

Weight approx.: 1800 kgDimensions (l x w x h) approx.: 1300 x 1300 x 800 mmDescription: Turntable Table diameter 1260mm Table height 660mm

 
Weight approx.: 1800 kg
Dimensions (l x w x h) approx.: 1300 x 1300 x 800 mm
Description: Turntable Table diameter 1260mm Table height 660mm
 
used machinery auction RESALE 850 €  
  DE   request
125551138
DS 800
Welding Tables

Weld - turning DS 800 27-01-173 delivery: immediately number: 27-01-173 manufacturer: turning device type: DS 800 MACHINE data built: approx 1980 L x W x H: 1200 x 1000 x 1500 mm weight: 800 kg Good general conditi ...
used machine
 
Weld - turning DS 800 27-01-173 delivery: immediately number: 27-01-173 manufacturer: turning device type: DS 800

MACHINE data built: approx 1980 L x W x H: 1200 x 1000 x 1500 mm weight: 800 kg

Good general condition specifications welding - turning device number of stations: 2 PCs 1 station: 3 - bake - chuck Ã? 320 mm 2. station: face plate Ã? 550 mm centre height: approx. 800 mm maximum circulation - diameter: approx. Ã? 1600 mm maximum workpiece weight: ca . 500 kg accessories â?¢ forward & reverse - drive â?¢ 3 - bake - chuck Ã? 320 mm â?¢ 1 set of hard JAWS â?¢ face plate Ã? 550 mm â?¢ stepless speed control â?¢ foot switch accessories on request price and more specifications on request
1980
Price  
    request
125689187
SEVERT S40.1
Welding turntable

Weight approx.: 700 kgDimensions (l x w x h) approx.: 700 x 900 x 1800 mmDescription: Turntable with welding power transmission Table diameter 600mm Passage diameter 60mm Center faceplate height 980mm Turning speed 7 rpm
used machine
 
Weight approx.: 700 kg
Dimensions (l x w x h) approx.: 700 x 900 x 1800 mm
Description: Turntable with welding power transmission Table diameter 600mm Passage diameter 60mm Center faceplate height 980mm Turning speed 7 rpm
1991
used machinery auction RESALE 850 €  
  DE   request
page 1 >
You didn't find your wanted machine? to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country