Производитель:
(Категория: 108)
plate thickness:15 mmtotal power requirement:13 A 9 KVAweight of the machine ca.:50 kgdimensions of the machine ca.:1000 x 400 x 650 mm
cutting range for steel to:20 mmtotal power requirement:3~ 220 / 380 Vweight of the machine ca.:100 kgdimensions of the machine ca.:500 x 750 x 1000 mm
cutting width:2500 mmNumbers of torche:2 Type of gas:Sauerstoff, Propan total power requirement:2 kWlength:6000 mmcontrol:KS 20 A Messer Griesheim Documents:vorhanden
table width:2300 mmtable length:7000 mmburner heads:1 Plasma -Schneidk. burner heads:2 autogene Schneidköpfe control:NBS 400 Documents:vorhanden
: neu : ca. 2 - 4 Wochen ab Auftr : 6400 €: 123.52 €: 3000 x 1500 mm: 850 mm: 8000 kg: 1544 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (stand ...
: neu : ca. 6-8 Wochen ab Auftrag : 10265 €: 197.09 €: 4000 x 2000 mm: 850 mm: 8000 kg: 2340 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (stan ...
: neu : ca. 2 - 4 Wochen ab Auftr : 1725 €: 1485 €: 16 mmThe extended entry level with added value in the set configuration for the most common work steps and applications.Consisting of:8 screw clamps 180° HIS16Z30002 screw clamps 45° HIS16Z30452 V-support HIS16VP1004 stop brackets 90x37, 5mm HIS16WA90376 pieces stop bracket 90x90mm HIS16WA90902 pieces stop bracket 300mm HIS16WA3002 pieces stop bar 75mm HIS16FA0758 pieces stop bar 115mm HIS16FA11520 pieces quick clamping bolt short HIS16SB1001 piece cleaning brush HIS16RB1 piece torch holder HIS16BH1 piece cleaner HIS-Cleaner-1L1 piece anti-adhesive agent HIS-Premium-1LOPTION:Tool trolley HIS16WW1000 € 449,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 5010 €: 96.69 €: 100 kg: 150 mm: 150 mm: 360 °: 120 kgm: 230 / 50 V / Hz: 0.25 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 350 mm: M12x6 mm: 690 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, seg ...
CONTROLS BALLIU WORKING RANGE -CUTTING MACHINE- laser capacity: 250 W X-axis travel: 3000 mm Y-axis travel: 1500 mmBALLIU MINOTAUR 4XL CO₂ laser cutting system Rofin DC 025The system is equipped with a ROFIN-SINAR DC 025 CO₂ laser source (approx. 250 W) and was operated as a complete, functional production system.Ideally suited for laser cutting, laser processing, plastic processing, thin sheet metal, special machine construction or retrofit projects.Robust portal design, industry standard, made in Europe.Technical data – laser source• Laser manufacturer: ROFIN-SINAR Laser GmbH (Germany)• Type: DC 025• Laser type: CO₂ laser, diffusion-cooled• Laser power: approx. 250 W• Cooling: water cooling• Laser weight: approx. 545 kg• Standards: CE / CDRH / DLR licenceScope of delivery-BALLIU MINOTAUR 4XL laser cutting system-ROFIN-SINAR DC 025 laser source-Origina ...
length:1200 mmheight:800 mmweight of the machine ca.:150 kgdimensions of the machine ca.:1200 x 600 x 800 mm
: neu : ca. 4 Wochen ab Auftragse : Polen : 1760 €: 1 : 1 : 18 mm: 60 °: 2-5 mm: 1800-5850 U/min: 40 mm: 2.2 kW: 585 mm: 156 mm: 238 mm: 10 kgportable bevelling machine for milling edges of plates and pipes made of steel, aluminum alloys, brass or plasticbevel angle and bevel radius depends on accessoriescontinuous bevel width adjustmentoverload protectionelectronic speed controlBASIC SET:BM-18 bevelling machine without accessoriesplastic case32mm open end spannerallen wrench hex s = 6Grease for fixing screws(5 g, 0.17 oz)user manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : 1190 €: 1000 x 1000 mm: 850 mm: 210 kg: 25 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load capa ...
: neu : ca. 4 Wochen ab Auftragse : Polen : 7390 €: 142.63 €: 1 : 1 : 14 mm: 30 °: 9 U/min: 6 - 40 mm: 55 mm: 100 mm: 2600 mm/min: 2.2 kW: 589 mm: 541 mm: 320 mm: 65 kgbevelling machine designed to mill plates and pipes made of carbon steel, alloy steel, stainless steel or aluminum alloysbevelling of lower edge in inverted positionstandard shearing cutter for processing stainless/alloyed steelreversible spindle against stuck milling toolSTANDARD SETABM-14 bevellermilling cutter for stainless steelcutter extraction tooltube bevelling shafttube bevelling washerflat wrenches: 12 - 13 mm, 18 - 19 mm, 24 - 26 mmhex wrenches: 5 / 6 mmuser manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight of the machine ca.:150 kgdimensions of the machine ca.:1200 x 600 x 800 mm
: neu : 020520 : ca. 2 - 4 Wochen ab Auftr : 1318 €: 28 mmAccessory set consisting of:4 pcs. screw clamp 180° HIS28Z30002 pcs. screw clamp 45° HIS28Z30452 pcs. V-support HIS28VP10012 pcs. quick clamping bolt short HIS28SB1004 pcs. stop rail 150mm HIS28FA1504 pcs. stop rail 225mm HIS28FA2252 pcs. stop rail 175mm HIS28WA1752 pcs. stop angle 275mm HIS28WA124275and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L)OPTION:Tool cart HIS28WW1000 € 545,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Wochen ab Auftragse : 1940 €: 2000 x 1000 mm: 850 mm: 449 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load capacity 50 ...
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 11000 €: 211.2 €: 1000 kg: 150 mm: 150 mm: 360 kgm: 230 / 50 V / Hz: 0.55 kW: 0.75 kW: 0.1 - 3 U/min: 60 s: 1200 mm: M20X6 mm: 1000 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, segment ...
: neu : ca. 2 - 4 Wochen ab Auftr : 995 €: 1200 x 800 mm: 150 kg: 16 mmTHIS MODEL IS DESIGNED FOR BEGINNERS AND FOR PROCESSING LIGHTER AND SMALLER WORKPIECES.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.2D standard welding and clamping table,1200 x 1200 with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid standard table legs with load capacity 1 tonne per leg, 500 kg per leg for castor modelThe data for this ad ...
: neu : ca. 6-8 Wochen ab Auftrag : Polen : 26880 €: 513.41 €: 1 : 1 : 30 mm: 60 °: 500-2920 U/min: 50 - 150 m/min: 3 mm/min: 100 mm: 7.5 kW: 1216 mm: 1275 mm: 850 kgcontinuous adjustment of spindle speed and feed rate make it suitable for different types of steel and aluminumhigh speed rotary milling head equipped with 10 insertscutting inserts for various materials3D contact wheel control for proper workpiece alignmentergonomic ball roller benchswarf drawerBASIC SET:SBM-500 stationary bevelling machineset of toolsuser manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Wochen ab Auftragse : Polen : 2095 €: 1 : 1 : 21 mm: 60 °: 2820 U/min: 1.1 kW: 20 kgportable bevelling machine for processing plates and pipesintegrated milling head with 10 square TCT insertsone universal guide plate for bevelling both plates and pipescontinuous angle adjustmentanti-vibration system for comfortable operationsinduction motor with increased start-up current pipe bevelling adjustmen: 150 - 300 mm260 - 600 mm (optional)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Wochen ab Auftragse : Polen : 1595 €: 1 : 1 : 21 mm: 60 °: 2740-3290 U/min: 2.2 kW: 21 kgportable heavy-duty machine designed for bevelling steel plates and -pipesguide rolls for easy operationautomatic overload protectiontwo milling heads with 10 square cutting insertsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 36.HL22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible.
: neu : ca. 2 - 4 Wochen ab Auftr : 2860 €: 1500 x 1000 mm: 850 mm: 8000 kg: 541 kg: 200 mm: 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (standard, height- ...
Welding table/clamping table, drilled holes and diagonal grid. Table-thickness: 15mm, hole-diameter: 28mm. Including a full set of accessories: - 4x 3D Angle - 6x Stop small - 6x Stop large - 1x Protractor - 2x Prism - 1x Eccentric - 1x Flat Angle - 12x Tension/clamping bolt - 12x Clamp Auction-ID: A1-40976-90
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 7730 €: 149.19 €: 500 kg: 150 mm: 150 mm: 360 kgm: 230 / 50 V / Hz: 0.37 kW: 0.37 kW: 0.1 - 3 U/min: 45 s: 800 mm: M20X6 mm: 640 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, segmentcyc ...
: neu : 2025 : 020156 : prompt, Zwischenverkauf v : Türkei : 6720 €: 129.7 €: 1 : 250 kg: 205 kg: 150 mm: 150 mm: 360 °: 360 kgm: 230 / 50 V / Hz: 0.37 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 600 mm: M16x6 mm: 550 mm: 1000 mm: 700 mm: 1700 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following f ...
: neu : 2486 : prompt, Zwischenverkauf v : 545 €: 1 : 28 mmИнструменты не входят в цену. Данные для этой рекламы были созданы с помощью ModulMWS — программного решения LogoTech oHG.
Информация: - Длина рук: 1800-2000 мм - Размеры: примерно 1800 x 1300 x 650 мм - Вес: примерно 250 кг - Алюминиевый кронштейн сломался (см. фото) - 1 шланг из листового металла вмят (см. фото) - Цена молотка: без загрузки экстракци
Inert gas welding device, inert gas device -Max. Welding power: 340 A. -4 roller drive -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg
500 € 
