This used SCHLATTER MG line was specially developed for the economical production of light and heavy standard bearing mats in medium and large series. The line wires are drawn directly from spools, while the cross wires are precisely straightened, cut to length and fed into the welding system from a large magazine. This concept enables fast changeover times and ensures maximum flexibility – a clear advantage when tapping into new markets. On request, and for an additional charge, the relevant straightening machines for the cross wires are available, as well as a comprehensive range of accessories, spare parts and a wear parts pack.
Working range Mesh width (cross-wire length) max. 1,500 – 3,080 mm Distance between the outermost longitudinal wires max. 2,750 mm Number of longitudinal wires, depending on configuration max. 64 Longitudinal wire spacing, fixed 50 mm with single bars and 100, 150, 200mm with double wire Longitudinal wire diameter: a. 4.0 – 12.0 mm single wire and B. 4.0 – 9.0 mm Double Wire Cross-wire spacing min. 40 mm, freely programmable in increments of 0.1 mm above this range Cross-wire diameter 4.0–12.0 mm Mesh length: up to 14.000mm
Working range Mesh width (cross-wire length) max. 1,600 – 2,500 mm Distance between the outermost longitudinal wires max. 2,400 mm Number of longitudinal wires, depending on configuration max. 26 Longitudinal wire spacing: 150 mm Longitudinal wire diameter 4.0 – 8.5 mm Cross-wire spacing min. 50 mm, freely programmable in increments of 0.1 mm above this range Cross-wire diameter 4.0 – 8.5 mm Working speed: max 150 cross wires/min Scope of supply: line wire spool pay off to mesh paket stacking system
Working range Mesh width (cross-wire length) max. 1,600 – 2,500 mm Distance between the outermost longitudinal wires max. 2,400 mm Number of longitudinal wires, depending on configuration max. 26 Longitudinal wire spacing: 150 mm Longitudinal wire diameter 4.0 – 8.5 mm Cross-wire spacing min. 50 mm, freely programmable in increments of 0.1 mm above this range Cross-wire diameter 4.0 – 8.5 mm Working speed: max 150 cross wires/min Scope of supply: line wire spool pay off to mesh paket stacking system
One used mesh welding line for standard mesh working line- and cross wires off spools, mainly exesting of: Line wire feed from spools, straightening units, line wire pull-off and compensating mechanism ( loop ), Roller Advance Feed, cross wire feed with disc insertion from spools, welding machine, Line Wire Shear mesh turning and stacking unit tying system for the mesh packages Extras: Spools Spare part package Butt welder
One used mesh welding line for standard and special mesh. Line wire feed from spools, coils or reels; straightening units, line wire pull-off and compensating mechanism; welding machine with roller advance feed; Cross Wire Disc Feed; Line Wire Shear; mesh turning and stacking unit This line is equipped as well with line wire pay off for spools. Extras: Spools ( 3 tons ), main trafo, compressor, butt welding machines and cold rolling line
One used SCHLATTER automatic binding unit for welded mesh stacks. Comprising a left and right unit; automatically binds the mesh stack
Schlatter coordinate Orion Flex Range: 1350 x 600 mm MY: 2003
MG 900 Schlatter Width: 1250 mm Length: 2000 mm Diameter 2-8 mm Pull in Pull out Cross Wire Magazine Stacker
WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS 2. AWAILIBLE Included with safety glass and two button pust operational system. with all safety system integrated and working table. WELDING NOMINAL POWER - 56 kWA AT 50% THROAT IN 450mm
WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS - CONNECTION: 380V/50Hz - WELDING NOMINAL POWER - 56 kWA AT 50% - S MAX: 135 kWA - Arm distance min /max : 218/468 in mm - THROAT IN 450mm - CLOSING FORCE: 4KN - COOLING WATER REQUIREMENT: 6 liter / min 2. AWAILIBLE 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS included with safety glass and two button pust operational system. with all safety system integrated and working table.
Machine will be complete refurbished with new parts width: 1200 mm PLC: Siemens S5 Diameter: 2-10 mm Pull out unit: MVL5
Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Stationary -Operation via hand switch -Arm length of welding machine: 350 mm -Welding pliers type: -Steering -Machine dimensions: 1500/1000/H1670 mm -Machine weight: 774 kg -Dimensions of control cabinet: 1550/420/H1960 mm -Weight of control cabinet: 330 kg
