Manufacturer:
(Category: 108)
Offer 23348 Specifications: - max. load capacity 1500 Kg - Face plate diameter 850 mm - Distance from floor to centre axis of rotation 800 mm - Rotary movement electr. infinitely variable 0.08 - 1.6 rpm - Right - + Left - Run - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirements Unit approx. W 850 x H 1450 x D 1000 mm - Space requirement: Moving unit W 850 x H 1450 x D 1000 mm - Weight of driven unit approx. 550 kg - Weight of moving unit approx. 400 kg
Key data: 1500 mm, 3500 kg
Stock number: 3871 WELDING TURNTABLE Manufacturer: ESAB PEMA, Type: 3500 F Machine NO.: A7001, Year of manufacture: 1987 Specifications: Table size 1500 mm Ø Large workpiece weight 3500 kg Gr. rotational torque 3100 NM Infinitely variable table rotations. 0.01 - 0.8 pr/min Hydraulic drive and tip Length: 2000 mm, Height: 1100, Width: 1500 mm, Weight: 1200 kg
Inv. Num. : 7264 Type: MA2010 Producer: Yaskawa Created: 2019 Parameters: Maximum arm reach: 2010 mm Maximum load capacity: 10 kg Control voltage: 3 x 400V AC 50 Hz Network Type: TNC-S Components: Controller DX200 Master Welding source Lorch S8 RoboMig XT Burner cleaner BRG2000D 2x Positioner DK-2500-R1000 Servo Rails FB500
WE OFFER AN NICE CONDITION TWIN ROBOTI WELDING CELL YEAR 2012, MACHINE WAS USED IN PRODUCTION FROM 2012 TO 2019 MACHINE WE CAN PUT FOR CUSTOMER ON GROUND, START UP AND MADE AN OPERATORS TRAINING POSITIONER IS HORIZONTAL TURNING: SEE VIDEO LENGHT OF POSITIONER: 4 METERS MAX LOAD PER SIDE PALET 750KG ROBOTS 2X OTC MODEL: NV61-NEFN ROBOTS CONTROL: AX-21 CV0000 WELDING MACHINES 2X FRONIUS CMT TOOLINGS PALET CAN BE CHANGING WE CAN OFFER ALSO TOLINGS FOR THE CUSTOMER PRODUCT :
Table dimensions: 1000 x 1000 mmtable load: 4000 Kgswivelling range: 105 Gradturning speeds: 0,15 - 1,5 U/minheight adjustment: 1010 - 1836 mmhollow spindle diameter: mmwelding current: 1000 Amperemax. torque on the faceplate: 8000 Nmtotal power requirement: 6,0 kWdimensions of the machine ca.: mCharacteristics:• Made in EU• Self-locking gear, therefore no leading and trailing at eccentric load• Hydraulic height adjustment allows almost limitless positioning• Electronic quality components from Schneider / Siemens / Delta• Frequency-controlled stepless speed of the turntable• High stability through a heavy and compact design• CE certificate• Very good value for money• Standard version comes with remote control and dual foot pedal• 3 years warranty (see warranty conditions)• Hydraulically height adjustable with locking system (for fall protection)The data for this a ...
diameter: 28 mmlength: 50 mmclamping range: 45-50 mmThe price is exclusive of the statutory value-added tax.Also available as D28 x 50 mm.Type: Ball Locking Pin 75 mmDiameter: 28 +- 0.02 mmMaterial: 45 # SteelHardness: HRC28-32Surface Roughness: Ra 0.8 µmThe ball locking pins from GERD WOLFF represent specialized connecting elements designed for integration into various welding table systems and fixtures.Their primary function is the efficient and precise positioning and fastening of workpieces. These pins are compatible with welding tables of all brands that have a borehole diameter of 28 mm.The unique ball design allows for flexible positioning of the workpieces at different angles and positions.Due to their high-quality construction and robust design, the ball locking pins from GERD WOLFF offer reliable holding force throughout the entire welding process.These pins ensure easy handli ...
WMA WMP 08 One-Handed Bumper Air-cooled single-lever butt system for vehicle construction, tank construction, steel cabinet construction, sheet metal processing and wire industry - problem-free welding of all sheet metal - Galvanized sheets can be welded flawlessly by controlled current increase and current reduction - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardised rotary connections - Only one plug each for welding power line, control cable and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Easy and pleasant to use - All set parameters and process variables can be read at a glance - Changes to welding parameters only for authorized personnel - Management of configuration a ...
diameter: 28 mmlength: 75 mmwidth: mmThe price is exclusive of the statutory value-added tax.Also available as D28 x 50 mm.Type: Ball Locking Pin 75 mmDiameter: 28 +- 0.02 mmMaterial: 45 # SteelHardness: HRC28-32Surface Roughness: Ra 0.8 µmThe ball locking pins from GERD WOLFF represent specialized connecting elements designed for integration into various welding table systems and fixtures.Their primary function is the efficient and precise positioning and fastening of workpieces. These pins are compatible with welding tables of all brands that have a borehole diameter of 28 mm.The unique ball design allows for flexible positioning of the workpieces at different angles and positions.Due to their high-quality construction and robust design, the ball locking pins from GERD WOLFF offer reliable holding force throughout the entire welding process.These pins ensure easy handling, quick fixa ...
table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight: 920 kgManufacturer: GERD WOLFFWebsite: www.gerdwolff.comTechnical Details:• Length 2400 mm• Width 1200 mm• Height 200 mm• Weight 920 kg• Hole diameter 28 mm• Hole spacing 100 mmAdvantages and Features:• 3-day gas nitriding process• Increased corrosion resistance• Weld spatter adhesion protection• Maximum load capacity• Enhanced fatigue strength• Improved vibration resistance• Fine scale engraving• Reinforcement with welded seams and ribs on the underside• Optimal working height of 820-865 mm• 6 height-adjustable support legs• Available with a matching accessory set (optional)Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology.To ensure adequate st ...
Machine Type: TIG Inverter Welding Machine gas-cooled DC system Make Jäckle Type TIG 201 i DC Connection voltage 1 x 230 Volt Adjustment range 3 – 200 amps Duty cycle 35% ED at 200 amps 60% ED at 180 amps 100% ED at 150 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Design of portable assembly system Fuse protection 16 amps Dimensions L x W x H 600 x 255 x 440 mm Weight 24 kg Age approx. 10 years Condition workshop-tested, very good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch WHL 17, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 piece of instruction manual Warrant ...
KEMPPI FASTMIG X 450 welding machine built in 2017 in Finland allows for both complex manual welding and efficient mechanised welding using the MIG/MAG method. The specially designed configuration of high-quality components delivers to its user excellent welding quality and performance, with unlimited flexibility for specialised tasks and materials. The KEMPPI FastMig welding machine is the perfect choice for professionals who value speed, precision and extensive machining capabilities. The KEMPPI semi-automatic welding machine consists of the following devices: – welding source: KEMPPI FastMig X 450 – wire feeder: KEMPPI WFX 300 – cooler: KEMPPI Cool X – 4-wheel trolley: KEMPPI PM500 Technical specifications of the MIG/MAG welding machine KEMPPI FASTMIG X 450 Power source - power supply: 3x 400 V (-15% to +20%); 50/60 Hz - maximum current (60%/100%): 450/350 A - ge ...
Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 129.187 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 24 months Condition workshop-tested, like new, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1 ...
welding current: 20 - 60 Acutting capacity: 1 - 20 mmopen-circuit voltage: 104 VRequired air-pressure: min. 4 barconnected load: 7,9 kWconnected load frequency: 400 Vweight: 16 kgDimensions (LxWxH): 480 x 260 x 360 mmDigital display.Surge protection.Plasma torch.Earth cable.Reducing valve with moisture separator.Equipped with IGBT technologyDelivered without CEE plug.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 5788 Type: MC10L-01 Producer: NACHI Created: 2015 Parameters: Control system: NACHI FD11 Total station hours 1: 45 h Total station hours 2: 21 h Number of axles: 6 pieces Welding radius: 2019 mm Source: ESAB AristoMig U5000i Accuracy: 0.06 mm Load capacity in the 3rd axis: 15 kG Wrist load capacity: 10 kg Degree of protection: IP65 Robot travel: 12000 mm Load capacity of the positioner with support tailstock: 1500 kg Frame length of the 1st station: 6000 mm Frame length of the 2nd station: 4000 mm Maximum turning diameter of the clamping device with the part: 1650 mm Carriageway Positioner with support tailstock Controls Security features and fences Automatic Torch Calibration System Hood (2 pieces) Aspirator TIG torch set with filler wire NYTRON Cleaning Station
Inv. Num. : 4741 Type: IR-SA 840 M Producer: Tiesse Created: 2006 Parameters: Table dimensions: 2410x930 mm Height: 3300 mm Width: 7000 mm Length: 5600 mm Equipment: Robot KAWASAKI FA 06 E C14 VK Robot Support MIG welding machines: Fronius Transpuls Sinergic 5000 Inverter TIG welding machines: Fronius Trans TIG 3000 DC Welding torch: ROBO 455 S S. Fronius FK4000 cooling unit Burner support: Binzel MOD CAT CPL-M Space for Fronius VR 1500 Euro 4R wire feeder Burner cleaning station Binzel MOD BRS-LC
Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare ...
number: 37 Positionen: 28 mmcondition: neu weight: 35 kgBasic set 2 49 pieces, 28mm system, consisting of:Forceps: 8 x 280604Bolt: 12 x 280511Stop: 8 x 280420.NAngle: 4 x 280110.GThreaded bolt 8 x 280543Stop 8 x 160415Accessory set. 1 x 163999Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 65 Positionen: 28 mmcondition: neu weight: 49 kgBasic-Set 3 65 pieces, 28mm system, consisting of:Forceps: 10 x 280604Bolt: 18 x 280511Stop: 10 x 280420.NAngle: 6 x 280110.GAngle: 4 x 280162.NThreaded bolt 8 x 280543Stop 8 x 160415Accessory set. 1 x 163999Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 26 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report ...
Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 31 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report ...
Ref. -No.: 10197Manufacturer: N/AStorage location: Halberstadt
Ref. -No.: 10198Manufacturer: N/AStorage location: HalberstadtFurther information:autom. welding station with positioner
Ref. -No.: 10195Manufacturer: ESABStorage location: HalberstadtCountry of origin: Schwedenserial number: 620-703-3544
Ref. -No.: 10196Manufacturer: HYUNDAIYear of construction: 2008Storage location: HalberstadtCountry of origin: Südkoreaserial number: HB5-0156-440
table length: 1200 mmtable width: 1200 mmtable height: 840 - 890 mmweight of the machine ca.: 0,32 tWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T = 15The surface is untreated.Sidewalls 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.including floor storageAccessories optional Surface flatness 0.2 - 0.4mm on 1000mm.The table can be moved with a pallet truck.Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine type: MIG/MAG welding system Make: Werner Type Wemag 300 K-1 Connection voltage 3 x 400 volts Setting range 40 - 300 amps Duty cycle 60 % d.c. at 300 amps 100% d.c. at 230 amps Current setting 21 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile industrial plant Wire feed gearbox toothed 4-roller gearbox Fuse 32 amps Dimensions L x W x H 1100 x 420 x 720 mm Weight 135 kg Age: 32 Years Optional accessories 2-stroke / 4-stroke Condition workshop-tested, good, incl. UVV workshop test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece of pressure reducer argon with 2 pressure gauges 1 piece welding wire D-300, 5 kg 1 piece of welding gloves with cuff 1 piece spare parts box cpl. Equipped 1 piec ...
Machine type: Electrode welding rectifier Make EWS Attachment no.: 290.623 Type EW 130 Connection voltage 1 x 230 volts Setting range 3 – 130 amps Duty cycle 35 % d.c. at 130 amps 60% d.c. at 100 amps 100% d.c. at 90 amps Current adjustment infinitely variable max. weldable electrode 3.2 mm Ø Cooling by built-in fan Portable assembly line design Fuse 16 amps Dimensions L x W x H 340 x 170 x 220 mm Weight 6 kg Age approx. 15 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece facing glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 25 rod electrodes Böhler 2.5 x 350 mm 25 rod electrodes Böhler 3.2 x 350 mm Warranty 6 months from the date of deliver ...
Machine type: TIG inverter welding system gas-cooled direct current system Make Eurotronic Type TIG 1501 - DCi Connection voltage 1 x 230 volts Setting range 5 – 150 amps Duty cycle 35 % d.c. at 150 amps 60% d.c. at 120 amps 100% d.c. at 100 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly line design Fuse 16 amps Dimensions L x W x H 400 x 170 x 250 mm Weight 9 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece ME-TIG burner TH 161 G, 4 m 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 12 Months Warranty 1 Piece Instruction Man ...
Machine type: TIG inverter welding system gas-cooled direct current system Make: Merkle Type TIG 300 DC Serial No. 70.381 Connection voltage 3 x 400 volts Setting range 5 – 300 amps Duty cycle 50 % d.c. at 300 amps 60% d.c. at 280 amps 100% d.c. at 220 amps Current adjustment infinitely variable max. weldable material thickness steel / VA = 8 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system design Fuse 16 amps Dimensions L x W x H 535 x 230 x 465 mm Weight 26 kg Age approx. 13 years Optional accessories Connection for water cooling Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 pie ...
Suction capacity: 1200 m³/h max. static pressure: 1350 Pa electr. Connection: 380 V, 0.75 kW Space requirements: 700 x 660 x 1030 mm Weight:
Mieth Maschinenhandel
