welding machines used for sale (1,654)

table length: 1200 mmtable width: 800 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,18 tdimensions: 1,2 x 0,8 x 0,85 mSpecial offer ! Siegmund Workstation incl. 2 drawers + tool set BThrough hardened tool steel, bore Ø 16 mmHoles surface 50x50 mm grid, material thickness approx. 11.5 - 13 mm.Consisting of:1x 004002 (Siegmund Workstation)1x 164004.X07 (perforated plate)1x 164030 (clamp holder)1x 004020 (shelf)1x 164035 (bolt and prism holder)1x 004025 (tool wall including shelf)2x 004210 (drawer)4x 160620 (clamp)8x 160511 (double quick release bolts without groove)6x 160412 (stop)2x 160108.N (angle)1x 160852 (Allen key)1x 164301 (vice)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2500 mmtable load: 20,0 tswivelling range: 0 - 135 Gradturning speeds: 0,04 - 0,4 U/minmax. torque on the faceplate: 40000 Nmtable pass: 200 mmwelding current: 1000 Amperetotal power requirement: 5,5 + 11,0 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,261 tdimensions: 1,2 x 1,2 x 0,85 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 11.5 - 13.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,parallel hole arrangement in a 25 mm grid on the sides.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 900 mmtable load: 1,0 tswivelling range: 135 Gradturning speeds: 0,12 - 1,2 U/min: 820 mmwelding current: 500 Amperetotal power requirement: 0,75 + 0,55 kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: 1,5 x 1,0 x 0,9 m• Self-locking gear, therefore no forward and backward at eccentric Load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table load: 500 Kgtable load capacity: 250 kg. vertikaltable diameter: 550 mmswivelling range: 135 (-45 - +90) Gradturning speeds: 0 - 5 stufenlos U/minconnected load frequency: 230 Vtotal power requirement: 0,8 KWweight of the machine ca.: 0,255 tdimensions of the machine ca.: 0,82 x 0,73 x 0,71 mWelding turntable with- large passage 165mm- Footswitch- tilt by motor- Speed infinitely adjustable- 250 amp welding current transmissionDemonstration machine documentation only in English.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 1200 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,32 tdimensions: 1,2 x 1,2 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 60 tworkpiece diameter: 750 - 5000 mmdrum diameter: 480 x 180 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1200 x 1200 mmtable load: 10000 Kgswivelling range: 105 Gradturning speeds: 0,07 x 0,6 U/minheight adjustment: 1450 - 2450 mmhollow spindle diameter: mmwelding current: 1000 Amperemax. torque on the faceplate: 20000 Nmtotal power requirement: 12,1 kWdimensions of the machine ca.: mCharacteristics:• Made in EU• Self-locking gear, therefore no leading and trailing at eccentric load• Hydraulic height adjustment allows almost limitless positioning• Electronic quality components from Schneider / Siemens / Delta• Frequency-controlled stepless speed of the turntable• High stability through a heavy and compact design• CE certificate• Very good value for money• Standard version comes with remote control and dual foot pedal• 3 years warranty (see warranty conditions)• Hydraulically height adjustable with locking system (for fall protection)The data for thi ...

table length: 2400 mmtable width: 1200 mmtable height: 850 - 900 mmweight of the machine ca.: 0,65 tWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T = 15The surface is untreated.Sidewalls 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.including floor storageAccessories optional Surface flatness 0.2 - 0.4mm on 1000mm.The table can be moved with a pallet truck.Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mmtable load: 3,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 6000 Nmtable pass: 200 mmwelding current: 700 Amperetotal power requirement: 1,1 + 2,2 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 tworkpiece diameter: 600 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 tworkpiece diameter: 250 - 2500 mmdrum diameter: 250 x 100 mmfeed: 100 - 1000 mm/mintotal power requirement: 0,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 100 tworkpiece diameter: 1000 - 6300 mmdrum diameter: 500 x 240 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 80 tworkpiece diameter: 850 - 5500 mmdrum diameter: 450 x 240 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 300 mmtable load: 50 Kgswivelling range: 90 Gradturning speeds: 1 - 12 stufenlos U/mintable load capacity: 50 kg vertikaltotal power requirement: 0,22 kWweight of the machine ca.: 0,036 tdimensions of the machine ca.: 0,45 x 0,43 x 0,38 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2900 mmtable width: 1200 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,77 tdimensions: 2,9 x 1,2 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 690 mmtable load: 0,5/0,25 tswivelling range: 0 - 90 motorisch Gradturning speeds: 0,2 - 2,5 U/minspindle bore: 100 mmTorque: 375 Nmwelding current: 500 Ampereconnected load frequency: 230 Voltweight: 290 kgDimensions (LxWxH): 800 x 750 x 750 mmWelding turntable with- Footswitch- tilt motor- Speed continuously adjustable- 500 amps welding current transmissionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1100 mmtable load: 2000 Kgswivelling range: 0 - 135 Gradturning speeds: 0,1 - 1,0 U/minheight adjustment: 1100 - 1550 mmmax. torque on the faceplate: 4000 Nmengine output: 1,1 / 0,75 kWwelding current: 500 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.Welding power transmission for max.500Ampere.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mmtable load: 3 tswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/min: 6000 Nm0: 1,1 / 1,1 kWwelding current: 700 Ampere• Self-locking gear, therefore no forward and backward at eccentric load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1100 mmtable load: 2 tswivelling range: 0 - 135 Gradturning speeds: 0,1 - 1,0 U/min: 4000 Nm0: 1,1 / 0,75 kWwelding current: 500 Ampere• Self-locking gear, therefore no forward and backward at eccentric Load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: NA mmheight: NA mmtotal power requirement: 5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1800 mmtable load: 8 tswivelling range: 0 - 130 Gradturning speeds: 0,02 - 0,2 U/min: 16000 Nm0: 1,1 / 2,2 kWwelding current: 1000 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 450 mmtable load: 300 Kgswivelling range: 90 Gradturning speeds: 0,2 - 2 stufenlos U/mintable load capacity: 300 kg vertikaltotal power requirement: 220 kWweight of the machine ca.: 0,078 tdimensions of the machine ca.: 0,66 x 0,45 x 0,48 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 350 mmtable load: 100 Kgswivelling range: 90 Gradturning speeds: 0,2 - 2 stufenlos U/mintable load capacity: 50 kg. vertikaltotal power requirement: 220 kWweight of the machine ca.: 0,055 tdimensions of the machine ca.: 0,46 x 0,4 x 0,42 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 10 Kginternal dimension: 135 x 80 x 480 mmoutput: 0,5 kwconnected load frequency: 220 - 240 Vsetting device: 30 - 180 Gradweight: 15 kgdimensions: 600 x 250 x 200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 43 Positionenweight: 40 kgcondition: neu 0Basic set 3 / 43 piecesfor table top thickness 15mm and 25mm6 pcs screw clamps12 pcs. quick clamping bolts6 pcs. universal stop 150mm6 pcs. universal stop 225mm2 stop and clamping angles 175mm2 stop and clamping angles 275mm2 pcs. prisms 60mm1 piece torch holder1 pc. Eccentric stop 100mm diameter1 piece perforated brush 30mm2 pieces separating lotion 500ml, on a natural, biological basis2 pcs. Welding table cleaner 500ml, on a natural, biological basisThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current capacity: 76 kVAthroat: 0 mmcontact pressure capacity: kptotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mSpot Welder mobile, 76 kVA-50%,117 kW Connecting LoadThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Type: Electrode Inverter Welding Rectifier without bi-power device Make Merkle Type MobiARC 284 cel Appendix No. 103.101 Connection voltage 3 x 400 volts Adjustment range 20 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable max. weldable material thickness 7 mm Cooling inverter through built-in fan Portable assembly system design Fuse 16 Ampere Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 9 years Connection for hand and foot remote control Condition workshop tested, very good, incl. UVV test protocol Scope of supply welding system with the following accessories: 1 piece of electrode cable 1 piece ground cable 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 pcs rod electrode ...

Offer 24497 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1 50 - 175 rpm - Level 2 175 - 640 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance between machined base plate and drilling spindle approx. 1250 mm - Coolant device -Lighting - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Offer 24500 Specifications - Vertical version for extracting welding mist + abrasive dust - Exhaust air can be discharged into the work area or outside - BGIA M – Class - Control KOMPAKT 3000 - Air volume flow approx. 28000 m³/h - max. static pressure 4000 pa - Efficiency > 99.9% - 6 cartridge filters - Filter area 6 / 150 m² - Jet Pulse filter cleaning - Dust container 40 L - Compressed air connection 6 to 8 bar - Drive - Fan 400 V / 5.5 kW - Space requirement approx. W 1900 x H 3600 x D 1600 mm - Weight approx. 990 kg