welding machines used for sale (1,654)

length: 0 mmheight: 0 mmtotal power requirement: kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mUltrasonic Welding Machine for Plastic ArticlesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,74 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2+N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 17 - 19.0 mm.The holes have a diameter of 22 mm.Hole arrangement in a 100 mm grid on the table top,Side panels 150mm with parallel hole arrangement in a 50mm grid.Incl. basic foot equipment. Table height 850mmPrice plus packaging and transport.Other dimensions available.The accessories shown are not included in the scope of delivery.Optionally available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 106 Positionenweight: 283 kgcondition: neu : 28 mmSet. 4: 110 pieces 28mm system, consisting of:Ferrules: 14 x 280610.NFerrules: 10 x 280630.NPrism: 6 x 280648.1.NBolt: 30 x 160511Magnetic bolt 8 x 280740Stop: 10 x 280410.NStop: 10 x 280420.NStop: 4 x 280430.NAngle: 8 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAngle: 1 x 280164.NAngle: 1 x 280165.NAngle: 1 x 280166.NAngle: 1 x 280167.NTrolley: 1 x 280910Accessory set. 1 x 283999Price information plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mmtable load: 3 tswivelling range: 0 - 135 Gradturning speeds: 0,07- 0,7 U/mintable height adjustment: von 980 bis 1750 mmmax. torque on the faceplate: 4500 Nmwelding current: 700 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mmtable load: 10000 Kgswivelling range: 0 - 130 Gradturning speeds: 0,02 - 0,2 U/minheight adjustment: 1450 - 2200 mmmax. torque on the faceplate: 20000 Nmengine output: 1,5 / 2,0 kWwelding current: 1000 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mmtable load: 4 tswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/min: 8000 Nm0: 1,1 / 1,5 kWwelding current: 700 Ampere• Self-locking gear, therefore no forward and backward at eccentric load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 400 mmtable width: 400 mmtable load: 0,2 ttable diameter: 400 mmswivelling range: 90 Gradturning speeds: 0,2 - 2 stufenlos U/mintable load capacity: 100 kg. vertikaltotal power requirement: 220 kWweight of the machine ca.: 0,065 tdimensions of the machine ca.: 0,56 x 0,42 x 0,46 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mmtable load: 10,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 20000 Nmtable pass: 200 mmwelding current: 1000 Amperetotal power requirement: 3,0 + 4,0 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mmtable load: 3000 Kgswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/minheight adjustment: 1200 - 1800 mmmax. torque on the faceplate: 6000 Nmengine output: 1,1 / 1,1 kWwelding current: 700 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.Welding power transmission for max.500Ampere.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1600 mmtable load: 8 tswivelling range: 0 - 130 Gradturning speeds: 0,05- 0,5 U/mintable height adjustment: von 1210 bis 2238 mmmax. torque on the faceplate: 1200 Nmwelding current: 700 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 10 - 200 mmheight: 67,5 mmdaylight: 65 mmexternal diameter: Futter 200 mmexternal diameter: Spannhebel 360 mmweight: 4 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1000 Kgworkpiece diameter: 20 - 800 mmdrum diameter: 200 x 50 mmfeed: 50 - 2000 mm/minweight: 65 kgtotal power requirement: 0,6 kWdimensions of the machine ca.: 0,8 x 0,6 x 0,6 mroller block- Torch tripod- Speed infinitely variable- foot switch- User manual in EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: 5 - 160 Aconnected load frequency: 230 Vweight: 7,9 kgDimensions (LxWxH): 310 x 140 x 230 mmESAB inverter TIG welding machine Rogue ET 180i CE TIG DCAn excellent high-frequency TIG ignition ensures afaultless welding start, as well as even and stablearc properties.Easy to use - setting up the welding parameters issimple and intuitive.Robust design IP23S housing for applications inproduction plants and on construction sites.Comprehensive TIG functions for optimal process control forevery application and a pulse function of up to 500Hz tocontrol the ideal heat input.A PFC module ensures a stable arc andinsensitivity to mains fluctuations - even when working withlong extension cables of up to 100 meters (PRO version only).Optionally, the welding current can be set from the TIG torch, foot pedal orhand-held remote control.technical data:Primary voltage, 1-phase 230 VAC ±15% ...

welding current: max. 200 Aopen-circuit voltage: 14 - 24 Vconnected load frequency: 230 Vweight: 25 kgDimensions (LxWxH): 500 x 200 x 300 mmEquipment:Hose packageGround cableWelding nozzles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,26 tdimensions: 1,2 x 0,8 x 0,85 mSpecial offer ! Siegmund workstation incl. 2 drawers + tool set Bhigh quality steel S355J2 + N, plasma nitrided and BAR-coatedBoreholes Ø 22 mm, boreholes surface 100x100 mm gridMaterial thickness approx. 17 - 19 mmConsisting of:1x 004002 (Siegmund Workstation)1x 224004.P (perforated plate)1x 224030 (clamp holder)1x 004020 (shelf)1x 224035 (bolt and prism holder)1x 004025 (tool wall including shelf)2x 004210 (drawer)4x 220610.1 (clamp)8x 220511 (double quick release bolts without groove)6x 220410.N (stop)2x 220110.N (angle)1x 220852 (Allen key)1x 004303 (vice)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1000 mmtable load: 1200 Kgswivelling range: 0 - 135 Gradturning speeds: 0,1 - 1,0 U/minmax. torque on the faceplate: 900 Nmwelding current: 500 Amperetotal power requirement: 0,75 + 0,75 kWweight of the machine ca.: 0,8 tWelding rotary tilting table- Remote control- 2 x welding current transmissionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1300 mmtable width: 800 mmtable height: 920 - 1000 mm: 1000 kgheight of stroke: 510 - 1550 mmtotal connected load: 1,5 kWconnected load frequency: 230 Vweight of the machine ca.: 0,55 tWelding table on lifting table:Hole diameter: 28mmThe table is made of 15mm thick S355 steelThe surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides.Side panels 150 x 10mmRibbed bottom for reinforcement.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 550 mmtable load: 500 Kgswivelling range: 135 Gradtilt adjustment: manually/mechanicall: motorisch turning speeds: max. 5 U/min stufenlostable load capacity: 250 kg. vertikaltotal power requirement: 0,8 kWweight of the machine ca.: 245 Kgdimensions of the machine ca.: 820 x 730 x 710 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 2,2 tworkpiece diameter: 101 - 1524 mmfeed speeds infinitely variable: 0 - 3600 mm/mingear diameter: 254 mmgear width: 76 mmtotal power requirement: 0,5 kWweight of the machine ca.: 0,245 tdimensions of the machine ca.: 1,02 x 0,82 x 0,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1000 Kgworkpiece diameter: 20 - 800 mmdrum diameter: 200 x 50 mmfeed: 50 - 2000 mm/minweight: 65 kgtotal power requirement: 0,6 kWdimensions of the machine ca.: 0,8 x 0,6 x 0,6 mroller block- Torch tripod- Speed infinitely variable- foot switch- User manual in EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2990 mmtable width: 1490 mmtable height: 850 - 900 mmweight of the machine ca.: 0,8 tWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T = 15The surface is untreated.Sidewalls 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.including floor storageAccessories optional Surface flatness 0.2 - 0.4mm on 1000mm.The table can be moved with a pallet truck.Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 1,1 tdimensions: 3,0 x 1,5 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 17-19.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,Side walls 150mm with parallel hole arrangement in a 25 mm grid.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.Other dimensions available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 77 Positionenweight: 146 kgcondition: neu : 28 mmSet 3: 77 pieces, 28mm system, consisting of:Ferrules: 10 x 280610.NFerrules: 6 x 280630.NPrism: 4 x 280648.1.NBolt: 24 x 160511Magnetic bolts 4 x 280740Stop: 8 x 280410.NStop: 8 x 280420.NAngle: 6 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAngle: 1 x 280166.NAngle: 1 x 280167.NAccessory set. 1 x 283999Price information plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: max. 300 Aopen-circuit voltage: 55 - 76 Vconnected load frequency: 400 Vweight: 150 kgDimensions (LxWxH): 900 x 400 x 900 mmAccessories for inert gas welding machine:Hose package 4m.Earth cable 4m Accessories for inert gas welding machine:Hose package 4m.Ground cable 4mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 80 - 280 mmheight: 67,5 mmdaylight: 100 mmexternal diameter: Futter 300 mmexternal diameter: Spannhebel 480 mmweight: 13 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 600 mmtable load: 0,6 tswivelling range: 0 - 90 Gradturning speeds: 0,1 - 1,8 U/minmax. torque on the faceplate: 450 Nmtable pass: 80 mmwelding current: 500 Amperetotal power requirement: 0,18 + 0,18 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mmtable load: 600 Kgswivelling range: 0 - 135 Gradturning speeds: 0,1 - 2,0 U/minheight adjustment: 850 - 1300 mmmax. torque on the faceplate: 900 Nmengine output: 0,37 / 0,37 kWwelding current: 500 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.Welding power transmission for max.500Ampere.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mmtable load: 5 tswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/min: 10000 Nm0: 1,5 / 1,5 kWwelding current: 700 Ampere• Self-locking gear, therefore no forward and backward at eccentric load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 32 Positionenweight: 35 kgBasic set 2 / 32 piecesfor table top thickness 15 and 25 mm6 pieces screw clamps12 pieces quick clamping bolts2 pieces universal stop 100 mm4 pieces universal stop 150 mm2 pieces universal stop 225 mm2 pieces stop and clamping angle 175 mm1 piece hole brush 300 mm1 piece burner holder1 piece non-stick spray 500 ml, natural, biologically based1 piece welding table cleaner 500 ml, natural, biologically basedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 700 mmtable load: 0,5 tswivelling range: 0 - 135 Gradturning speeds: 0,2 - 3 U/minheight adjustment: 400 - 900 mmboring diameter: 100 mmwelding current: max. 500 Amperetotal power requirement: 0,75 kWincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.