british flag
Resale Logo

Category 304: thermoforming machines

back back back
 banner advertisement information used injection moulding machines and peripherals  Szczep-pol s.c.  http://www.wtryskarki-polska.pl 
banner logo
start page > machines for plastic > all thermoforming machines > results
 
65 offers order by
post used machinery: registration     
No. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
page 1 > 2 3 4
125837382
LYLE (USA) 140 PV Stanze / Trim Press
Thermo forming machines

Trim Press as part of a thermoforming line, good condition. Located in Germany.
used machine
 
Trim Press as part of a thermoforming line, good condition. Located in Germany.
2002
Price  
    request
122270097
KIEFEL THERMOFORM KLS 70/190K
Thermoforming Machine

working pressure: 6 bar workpiece height max.: ohne Tisch: 350 mm workpiece height max.: mit Tisch: ca.150 mm vacuum pump: 300 m³/h foil width: ca.800 mm control: Siemens S5 connected load: 119 kVA total power requireme ...
used machine
 
working pressure: 6 bar
workpiece height max.: ohne Tisch: 350 mm
workpiece height max.: mit Tisch: ca.150 mm
vacuum pump: 300 m³/h
foil width: ca.800 mm
control: Siemens S5
connected load: 119 kVA
total power requirement: 119 kVA
weight of the machine ca.: ca. 9,5 t
space requirements of the machine approx.: L:11,0xB:6,0xH:4,8 m
THERMO FORMING MACHINE for vacuum forming and laminating of interior paneling in vehicle construction with films and textiles.
To this Machine can also be additionally offered Laminating Press Huber 30t Stock-no.0700901.
[...]:
-Form surface below max. 700x1900mm incl. infeed carriage
Top-form surface (in turntable design 4 times fold rotation) max. 700x1900mm
Heating station upper: L Heating surface: 2000xB: 1000mm power from 34 kW 134 pieces quartz lamps
Heating station lower: L Heating surface: 2000xB: 1000mm power of 34 kW 134 pieces quartz lamps
- cutting power /pressure up / down: 30kN
Vacuum pump 70m ³ / h per pump (more pumps available)
1992
Price  
    request
125316932
GN 2220A
Thermo forming machines

Make GN Model 2220A Delivery Date Immediately Maximum Forming Area 550 x 500 mm (22" x 20") Max Depth of Draw 100 mm Sheet Width 587 mm Material Thickness Range 0.15 - 1 mm Max Cycles 30 Materials PP - PET - OPS  ...
used machine
 
Make GN
Model 2220A
Delivery Date Immediately
Maximum Forming Area 550 x 500 mm (22" x 20")
Max Depth of Draw 100 mm
Sheet Width 587 mm
Material Thickness Range 0.15 - 1 mm
Max Cycles 30
Materials PP - PET - OPS
Power 380 V

All details are subject to change and/or errors.
All equipment is subject to availability and/or prior sale.
 
Price  
  UK   request
125299661
POLYTYPE DDM 160/ 8
Eight Color Lid Printer

High-Performance Lid Printing System with automation for 1 man- operation. Automatic Infeed Conveyor to Feed Vertical Lid Stacks in-feed robot from stack reservoir to Denester Universal Screw Denester ARCOTEC Gas pr ...
used machine
 
High-Performance Lid Printing System with automation for 1 man- operation.
Automatic Infeed Conveyor to Feed Vertical Lid Stacks
in-feed robot from stack reservoir to Denester
Universal Screw Denester
ARCOTEC Gas pre-treatment with pre-adjusted, automatically controlled gas-air mixture.
Main 8-Color Print Unit
Anti-ghosting inking units with fast removable, leak free ink fountains.
Automatic cleaning of system rollers.
Printing plate cylinder with quick locking device and micro-setting of the register for a fast reproduction.
Cooling system for Fountain Rolls and 2 x oscillating rollers.
No lid–no ink and no lid– no print system
SIEMENS S7 PLC Controls
Siemens SIMATIC PANEL OCP with Color Display.
UVITERNO DBT 5545/ 1 UV-Tunnel, with 3 step switch (2/ 4/ 5.5 kW)
Real Time Camera with Display & Controls to recognize & automatically blow off faulty Printed Lids
Horizontal lid re-stacker equipped with servo motor, exact lid counting and multi-stack delivery Conveyor.
Data storage memory.

Technical Data:
Round lids: Min./max. rim diameter: 80 –180 mm
Polygonal/ Rectangular lids:
Min. rim dimension : 50 x 50
Max. rim dimension : 180 x 180 mm
Min./max. lid height: 5/ 25 mm
Max. printing speed up to (lids/h) : 30,000/ hr
2004
Price  
  DE   request
125164568
KIEFEL KMD 52 BFSS
Thermo forming machines

Make Kiefel Model KMD 52 BFSS Year 1999 Hours 24,500 Delivery Date Immediately Max Tool Size 540 x 420 mm Max Forming Area 520 x 400 mm Depth of Draw 120 mm Max Sheet Width 570 mm Suitable Materials PS, PET, EPS ...
used machine
 
Make Kiefel
Model KMD 52 BFSS
Year 1999
Hours 24,500
Delivery Date Immediately
Max Tool Size 540 x 420 mm
Max Forming Area 520 x 400 mm
Depth of Draw 120 mm
Max Sheet Width 570 mm
Suitable Materials PS, PET, EPS, PP, PE, PVC
Max Cycles / min 55
Approx Length 7100 mm
Approx Width 2500 mm
Approx Height 2800 mm
Approx Weight 10,000 kg

Other Features
The machine comes with a KVH 83 Preheater for processing PP.
The forming station is equipped with BFS option for in mould cutting, especially useful for consistent flanges on circular Pots and has a fully motorised independent plug - especially useful on deep draw items.

All details are subject to change and/or errors.
All equipment is subject to availability and/or prior sale
1999
Price  
  UK   request
124913525
ILLIG RDM 75K
Thermo forming machines

Make: Illig Model: RDM 75K Year: 1998 Approx: Hours 80,000 Delivery Date: Immediately Location: Germany Max Forming Area: 700 x 450 mm Max Depth of Draw: 150 mm Max Material Width: 750 mm Max Index Length: 480 m ...
used machine
 
Make: Illig
Model: RDM 75K
Year: 1998
Approx: Hours 80,000
Delivery Date: Immediately
Location: Germany
Max Forming Area: 700 x 450 mm
Max Depth of Draw: 150 mm
Max Material Width: 750 mm
Max Index Length: 480 mm
Punching Force: 40,000 daN

Available Equipment:
• Automatic Pressure Former (Illig RDM 75K)
• UG 75d Stacker
• Illig RS 75b Granulator
• 70.3mm 40 cavity Illig Tool
• Rim Roller and Bagging line
1998
Price  
  UK   request
124814561
ITALPRODUCTS R/45-R/55) 6-F2
STAPLER

Manufacturer / Origin: Italproducts Italy (EU) Ser. No.: CI-009-IM55
used machine
 
Manufacturer / Origin: Italproducts Italy (EU)
Ser. No.: CI-009-IM55

1998
Price  
    request
124747051
ILLIG UA 250 ED
Thermoforming Machine

Heating output: 138.3kW, control: AURECO SIMATIC MULTI PANEL, length: 11115mm, width: 4705mm, height: 4430mm.
used machine
 
Heating output: 138.3kW, control: AURECO SIMATIC MULTI PANEL, length: 11115mm, width: 4705mm, height: 4430mm.
1989
Price  
  DE   request
124729941
ILIG R45
Thermo forming machines

Year: 1973 Serial number 483 The machine is still in use Engine 2,2 kW Heating power 3,9 kW
used machine
 
Year: 1973
Serial number 483
The machine is still in use
Engine 2,2 kW
Heating power 3,9 kW
1973
2,875 €  
  PL   request
124729939
KIEFEL KL2SH/76
Thermo forming machines

Production year 1994, serial number 102-0007 Included: Film unwinder: Kiefel KVH 83/2100, man. 1992 Pre-heating cabinet: Kiefel KVH 83/2100, man. 1992 Cutter (dieter): Kiefel Stacker Mill Machine parameters: Wi ...
used machine
 
Production year 1994, serial number 102-0007
Included:
Film unwinder: Kiefel KVH 83/2100, man. 1992
Pre-heating cabinet: Kiefel KVH 83/2100, man. 1992
Cutter (dieter): Kiefel
Stacker
Mill

Machine parameters:
Width: 3.6 m
Length: 13.63 m (11 m without a mill)
The width of the foil: 800 mm
Material: PS, PP, PET, OPS
Machine weight: approx. 15 t
The machine is fully functional. The machine was regularly serviced. A year ago it underwent general renovation, during which old guides and chains were replaced with new and original Kiefel as well as regeneration of actuators and replacement of seals.
It is possible to view the machine at work.
1994
32,200 €  
  PL   request
123937906
ITALPRODUCTS 55/TS
THERMO FORMING MACHINE

Equipment / Additional information: Aggregate holder of the coil - Engine power: 0.37 Kw - Holder: single - Max. Diameter of the bobbin: 1200 mm shaping subassembly - Max. Mold size: 550 x 360 mm - Max. ...
used machine
 
Equipment / Additional information:
Aggregate holder of the coil
- Engine power: 0.37 Kw
- Holder: single
- Max. Diameter of the bobbin: 1200 mm
shaping subassembly
- Max. Mold size: 550 x 360 mm
- Max. Positive height: 15 mm
- Max. Negative depth with shapes
With built-in cut: 130 mm
- Max. Negative depth with shapes
Only with molding: 110 mm
- Max. Width of the film 580 mm
- Min: width of the film: 250 mm
- Max. Movement step: 380 mm
- Min. Movement step: 6 0 mm
- Max. Thickness of thermoforming: 2 mm
- Max. Run of the upper level: 150 mm
- Max. Operating speed: 40 cycles / min.
- Max. Performance of the closure
The levels: 10000 Kg
- Max. Installed heating capacity: 48 Kw
- Heating thickness: 6.9 W / cm
- Movement of the mold unit: mechanical
- Movement of auxiliary systems: pneumatic
- Form System: Air
- Max. Operating pressure: 7 Kg / cm
- Max. Installed total power: 52 Kw
- Average energy consumption
During operation: 30 Kw
- Air consumption at 7 Kg / cm: 80 L / cycle
- Water consumption: 25 L / min

SEPARATE CUP STACKER ALSO AVAILABLE (95501.18)
1998
Price  
    request
123221649
OMSO PRIMAC 155/6 UV
Cup printing machines

6 colours 130 mm
used machine
 
6 colours
130 mm
1999
Price  
    request
123221648
OMSO DM 44/6N
Lids printing machines

6 colours Round & Square
used machine
 
6 colours
Round & Square
2011
Price  
    request
123221645
KIEFEL KMD 75 F - BFS
Thermo forming machines

750x540
used machine
 
750x540
2002
Price  
    request
123221644
OMG OMF/RV 50
Thermo forming machines

750 x 500 mm
used machine
 
750 x 500 mm
2003
Price  
    request
122646278  
VC999 RS 420 Thermoformer

Year of manufacture: 2007 Condition: Restored Film width: 320 mm Stride length: 250 mm Capacity: 7 cycles per minute Film thickness: 500 microns Package format: 2:1-external dimensions 135 x 250 mm P ...
used machine
 
Year of manufacture: 2007

Condition: Restored

Film width: 320 mm

Stride length: 250 mm

Capacity: 7 cycles per minute

Film thickness: 500 microns

Package format: 2:1-external dimensions 135 x 250 mm

Package: Darfresh

Conversion to rigid film

Dimensions (Lxwxh): 3352 x 690 x 1880 mm

Features PC Mitsubishi touch skrinom and vacuum pump 100 m3 of Gardner Denver

VC999 RS 420 is a high-performance thermoforming line with high speed and deep hood flexible films (for automatic packaging and labelling) for mjasoproizvodstve, packaging of meat products.

With simple linear design VC999 RS420, very easy to add and integrate peripheral equipment such as: dozirovshhik, filler, Printer Encoder, Labeler, screening device, metal detector and "peacemaker".

Simple and easy to use thanks to the touch control panel. Easy to fast and thorough cleaning after work shift.
2007
Price  
  RU   request
121150757
KIEFEL KVH 83
Temperature control units

Make Kiefel Model KVH 83 Year 2000 Delivery Date Immediately Max Material Width 830 mm Max Material Thickness 1.2 mm Heating Capacity 24 kW Temperature Heating Rolls 130 °C All details are subject to change a ...
used machine
 
Make Kiefel
Model KVH 83
Year 2000
Delivery Date Immediately
Max Material Width 830 mm
Max Material Thickness 1.2 mm
Heating Capacity 24 kW
Temperature Heating Rolls 130 °C

All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.
2000
Price  
  UK   request
121150746
ILLIG RDM 50K
Molding machines for cups

Make Illig Model RDM 50K Year 1998 Delivery Date Immediately Forming Area 500 x 280 mm Max Negative Height 125 / 150 mm Max Positive Height 15 mm Max Material Width 525 mm Max Material Thickness 2 mm Min Materia ...
used machine
 
Make Illig
Model RDM 50K
Year 1998
Delivery Date Immediately
Forming Area 500 x 280 mm
Max Negative Height 125 / 150 mm
Max Positive Height 15 mm
Max Material Width 525 mm
Max Material Thickness 2 mm
Min Material Thickness 0.4 mm
Max Feed Length 310 mm
Max Mould Closing Force 15,000 daN

Equipment
• Auto Feeder
• Automatic Pressure Former (Illig RDM 50K)
• 95mm 10 Cavity PS M&M Mould (2007)
• Stacking Unit
• Grinder

All details are subject to change and/or errors.
All equipment is subject to availability and/or prior sale.
1998
Price  
  UK   request
121112047
ILLIG UA 150
Vacuum-forming machines

Make Illig Model UA 150 Year 1991 Delivery Date December 2017 Max Sheet Size 1500 x 1000 mm Max Forming Area 1450 x 950 mm Max Depth of Draw 600 mm Max Mould Height 720 mm Max Sheet Thickness 10 mm Roll Fed Shee ...
used machine
 
Make Illig
Model UA 150
Year 1991
Delivery Date December 2017
Max Sheet Size 1500 x 1000 mm
Max Forming Area 1450 x 950 mm
Max Depth of Draw 600 mm
Max Mould Height 720 mm
Max Sheet Thickness 10 mm
Roll Fed Sheet Yes
Auto Sheet Feeder Yes
Notes
All details are subject to change and/or errors.
All equipment is subject to availability and/or prior sale.
1991
Price  
  UK   request
119972555
ILLIG RDK80
Thermo forming machines

ILLIG RDK80, age 2008, Line can be inspected in production ! Unwind Stand ILLIG RO800b Max film width 805 mm Illig RDK80 with Servomotor drive Servomotor Indexing with a tolerance of +/- 0.2 mm Max. Indexing 583 m ...
used machine
 
ILLIG RDK80, age 2008, Line can be inspected in production !

Unwind Stand ILLIG RO800b
Max film width 805 mm
Illig RDK80 with Servomotor drive
Servomotor Indexing with a tolerance of +/- 0.2 mm
Max. Indexing 583 mm
max film thickness 2.5 mm. Min film thickness 0.18 mm
Auto sheet sag control
Auto pneumatic Transport Rail spreading for PP
Water cooled Transport Rails
Top & bottom Heaters. Heater length 1750 mm
Heating capacity top heater 37.1 kW
Heating capacity lower heater 37.1 kW
Combined Form/ Trim Station (trimming with Steel Rule Die)
Servomotor Clamping Unit with Plug assist
Form Area (forming only) 756 x 565 mm
Form Area Forming/ Trimming 743 x 552 mm
Max. Mold width between Transport Rails 780 mm
Max Mold length in Indexing direction 595 mm
max. Draw +/ - 120 mm
DSB Steel Rule Trimming Station:
Trimming force 600 kN
Top and Bottom Platen driven by Motors
Mold width between Transport Rails 780 mm
Mold length in Indexing direction 580 mm
Max. Heating Plate Temp. 250 deg C
Servomotor Stacking/ counting Station with 2-axis handling system.
3000 mm long delivery conveyor for Counted/ Stacked Products
Skeletal waste material winder
Siemens S7 Controls
Siemens Multi Panel/ WIN CE 12" TFT HMI Diaplay.
Only used for 19,000 hrs !
2008
Price  
  EU   request
page 1 >
You didn't find your wanted machine? to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Get the latest machine offers by email: order newsletter