Hidrobrasil PH4C 50T Thermo forming machines

### HIDROBRASIL 50 T Heating Press with Sliding Table (600x600mm)

If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click:
HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices!
##########################
50 T top piston heating press, in double column brackets suitable for continuous shift operation, with these basic data:
- With a heating level
- Idle speed up to 10 mm/sec (adjustable via rotary control)
- Opening speed up to 40 mm/sec
- Starting pressing speed 8 mm/sec
- Table size/heating plate size 522 mm deep, x522mm wide
- Plunger size/heating plate size 498 mm deep, x498mm wide
- 2 heating plates, electrically heated, up to 200 degrees
- Oil temperature monitoring
- Circulating oil cooling on the hydraulics
- Pressure Holding Valve 0 to 3600 sec
- Pressure adjustment from 8 T to 50 T (50 T = 300 bar)
- Travel distance limitation optionally via pressure or position
- Two-handed operation, adjustable or permanently mounted
- Machine body double painted
- Signal light: Red: Alarm, Yellow: Back chamfer, Green: Ready
- Heating plates with electric heating rods, up to max. 200 degrees
- Construction, commissioning, instruction against separate calculation
### Technical data

#### Design
- Press design: Double column press

#### Thermally neutral
- Temperature range: 80 – 120 °C

#### Operating Pages
- Number of operating sides: 1 page

#### Forces
- Press force max.: 500 kN
- Free tearing force max.: 20 kN
- Print build-up time: Max. 3 sec. (closed tool steel on steel)

#### Dimensions
- Max. opening width: 600 mm
- Stroke and min. opening: 300/300 mm
- Table height above floor with heating plate: 900 mm
- Height above ground (construction height): approx. 2,500 mm
- Hall height: min. 3,500 mm
- Parallel deviation at 20°C: +/- 0.1 mm
- Deflection: < 0.2 mm/m (determined at max. clamping force with 70% occupancy)
- Total weight of the press without operating fluids: approx. 2.9 t
- Accessories: 2 heating plates (522x522 mm or 498x498 mm, max. heating capacity)
- Heating plates equipped with temperature sensors: up to 200 degrees

#### Speeds
- Quick-closing: 10 mm/sec.
- Pressing speed max.: 8 mm/sec.

#### Sound pressure
- Sound pressure level, measured at a height of 1.5m on the control panel according to DIN 45635-T16-KL3: max. 78 db(A)

#### Hydraulics
- Number of press cylinders: 1 pc.
- Operating pressure max.: 250 bar
- Print build-up time: Max. 3 sec.
- Pressure accuracy during the press stroke: +/- 5 bar
- Main pump: BOSCHREXROTH gear pump, approx. 26 L/min
- Oil volume: approx. 130 litres (HLP 46 MW)
- Ambient temperature: max. 40 °C
- Oil temperature: max. 55 °C
- Flow temperature: unspecified
- Automatic pressure adjustment after 5% pressure loss
- Constant pressure for up to 3600 sec

#### Electrics
- Main supply: 400 V AC
- Control voltage: 24 V DC
- Frequency: 50 Hz
- Connection to hydraulic main motor: 7.5 kW
- Total connection without heating plates: approx. 10 kW

**Description of the heating press:**

The HIDROBRASIL heating press with a pressing force of 50 tons and a table size of 600x600mm is specially designed for industrial applications. It is an oil-hydraulic double-column press, equipped with a sliding table mounted on spring-loaded rollers. This press is ideal for a wide variety of pressing processes, as it works precisely and reliably.

The press is equipped with high-quality heating plates that allow temperature control from 40 to 200 degrees. The heating plates can be adjusted via a keypad or optionally via a touchscreen control with recipe management.

**Safety and comfort features:**

- **Lighting of the press room:** Min. 1000 lux, heat-resistant design
- **Automatic pressure adjustment:** After 5% pressure loss, constant pressure for up to 3600 seconds
- **Safety devices:** Complies with the applicable safety regulations according to UVV as well as the standards and guidelines applicable to the EU

**Electrics/Controls:**

The control cabinet is connected to the press via vibration dampers and offers protection class IP 54 as well as approx. 20% reserve space for future expansions.

This heating press is ideal for companies looking for a reliable and versatile solution for their pressing needs. With its robust design and extensive safety features, it offers a high level of performance and safety.

##########################
Are you looking for a custom-fit machine?
Contact us for an individual offer.

If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click:
Contact us for an individual offer
HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices!
##########################

### Compilation of technical specifications

- **Total height**: approx. 2,500 mm
- **Table height above floor**: 900 mm
- **Installation height**: unspecified
- **Engine power**: 7.5 kW
- **Overall width**: unspecified
- **Total length**: unspecified
- **Radius**: unspecified
- **Press force**: max. 500 kN
- **Table width**: 522 mm
- **Table length**: 522 mm
- **Input power**: approx. 10 kW (without heating plates)
- **Operating speed**: 8 mm/s
- **Total weight**: approx. 2.9 t
- **Safety light barrier**: unspecified
- **Return speed**: unspecified
- **Width of ram plate**: 498 mm
- **Length of ram plate**: 498 mm
- **Plunger stroke**: unspecified
- **Distance table to ram**: 600 mm
- **Rapid traverse X-axis**: unspecified
- **Rapid traverse Y-axis**: unspecified
- **Rapid traverse Z-axis**: unspecified
- **Type of input current**: 400 V AC
- **DGUV tested to**: unspecified
- **Distance between stalls**: unspecified
- **Working height**: unspecified
- **Pressure phase**: unspecified
- **Cushion Stroke**: unspecified
- **Distance between columns**: unspecified
- **Retraction force**: unspecified
- **X-axis travel**: unspecified
- **Y-axis travel**: unspecified
- **Z-axis travel**: unspecified
- **Side stand passage**: unspecified
- **Lifting distance**: unspecified
- **Operating pressure**: max. 250 bar
- **Working range**: unspecified
- **Pressure**: unspecified
- **Diarrhea hole in the table**: unspecified
- **Oil tank capacity**: approx. 130 litres
- **Cabinet width**: unspecified
- **Input voltage**: 400 V AC
- **Cabinet height**: unspecified
- **Cabinet length**: unspecified
- **Passage width**: unspecified
- **Documentation/Manual**: unspecified
- **Retraction speed**: unspecified
- **Pressing speed**: 8 mm/s
- **Outer dimension width**: unspecified