subcategories
(3rd category level)
Manufacturer:
(Category: 204)
CAMAM orbital sander mod. LEC250 – CE compliant - With feeds - Matr. 11 - Year 1996 - Working dimensions min/max. 30/150 mm. - Min. radius of curvature mm. 250
CNT orbital sander mod. LOR 150 - CE compliant - Matr. 17002 -Diam. Min. max. machinable 10-45 mm.ù - Hp3 engine - Year 2017
900 mm sanding machine for turned products. GENINI mod. LAR90 - Maximum working length 900 mm. - Automatic loader
DMC 3-belt calibrating sander mod. USK1350 M3 - CE standard - 1 steel roller - 2 rubber rollers - 3 rubber rollers - N. 3 independent motors - Working width 1350mm - With shoes (short pieces device) - Blower on the third group - On/off device on each group - Touch screen control - Matr. SA/005006 - Year 2004 - CE compliant
Grinding machine Heesemann type EH31.11 Lk Bw Specifications: • Grinding width (mm): 1100 • Workpiece thickness (mm): 3 - 150 • Total grinding units: 1 • Longitudinal band: 1 • Calibration roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate varnish sanding • Table height constant •Carpet • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed: 3 - 11 m/min. • Sanding belt length longitudinal unit (mm): 1,900 x 1,120 • Pressure beam: CSD system, electromagnetic, wear-free • Availability: tested, in stock
Grinding machine Heesemann type EH52.13 Lw/Lk Bw Specifications: • Grinding width (mm): 1350 • Workpiece thickness (mm): 3 - 150 • Total grinding units: 2 • Longitudinal band: 2 • Contact roller diameter = 200 mm: 1 /15 kW • Combination unit: with small roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate varnish sanding • Table height constant •Carpet • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed: 3 - 12 m/min. • Sanding belt length longitudinal unit (mm): 2,100 x 1,400 • Pressure beam: CSD system, electromagnetic, wear-free • Conveyor belt: new • Availability: tested, in stock
gebr. Radius and bevel grinding machine FISCHER (BARTH) RFM 320 YOC 2007 Oscillation Tischgr. 1,275 x 300 mm 8 radii adjustable: (R2, 3, 4, 5, 6, 8, 10, 12.5) Bevel grinding device up to 16 mm wide Extraction connection: 60 mm Bracket for feeder Socket for feeder pneumatic belt cleaning Chassis Dimensions 130 x 70 cm Weight: 159 kg approx. 30 sandpaper incl. very good used condition Manufacturer
diameter: 450 mmworkpiece length: 600 mmwork piece width: 650 mmmax. working width: 600 mmnumber of brushing / polishing units: 1 st.Feed speed: 180 m/min.Max. diameter of brush / polishing rollers: 600 mmmotor power per brush / polishing roller: 5 kwcontrol: Siemens S7 total power requirement: 9 kWweight of the machine ca.: 2 x 2 x 2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding machine Löwer double-sided Type: DSM 2000 Year of Make: 1996 CE Grinding width 190 mm Grinding thickness – material thickness 2 – 180 mm Sanding belt dimensions 200 x 1800 mm Wear-free ceramic sanding shoe (no graphite coating necessary) Motorized height adjustment 0.37 kW Workpiece length min. 300 mm Feed speed 6/11/16 m/min. Sanding belt drive 2 x 5.5 kW / 400 V Sanding belt speed 22 m/sec. 1 sanding shoe and cleaning brush from above 1 sanding shoe and cleaning brush from below Blow-off device in front of the outlet Suction nozzle diameters 2 x 150 mm and 2 x 120 mm Inlet height 850 mm Total connected load approx. 14 kW Incl. workpiece return consisting of inclined chute and return roller conveyor good, ready-to-use condition Machine dimensions: L 2070 mm x W 920 mm x H 1890 mm Weight approx. 1500 kg
Widebelt Sander line with 3 machines Working width: 1300 Composed of: Boere Elite - 1 x calibration unit with contact roller - sandinmg unit from below Ernst LKB - Cross Sanding Unit - Longitudinal Sanding Unit OTT RSO - Calibration Roller - Sanding pad
Key data: 1350 mm, 2 st.
CALIBRATING SANDING machine with 2 belts (2 independent motors) model COSTA series SK 5 CC 1350 second-hand machine working conditions Excellent , machine as new machine with inverter on the belts and on the carpet fixed table, moving head machine with CE regulation: YES instruction booklet, CE declaration of conformity: YES for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various technical data : max. working width mm. 1350 max working height mm. 160 min working height mm. 4 dimensions of abrasive belts mm.1380 x 2620 advancement speed belt , with inverter , from 3 to 15 m/min (motor power Kw 1.1) automatic centering perforated carpet (there is no vacuum group) composition (2 belts, 2 independent motors) : 1st unit : rubber calibrating roller - diameter mm 200 - shore 85 - motor power Hp 10. with inverter ...
Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Composition: 1° Group - N° 2 adjustable brushes - Motor Hp 4 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Working length min mm 150 Working height min/max mm 10/100 Working width min 50 Protection cabin Electrical cabinet Overall dimensions mm 2700 x 1000 x 1250 h Weight kg 1500
used
max. width of grinding wheel: 100 mmdiameter / bore of grinding wheel: x mmFlange taper: x The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sanding belt dimensions 150x2250 mm Grinding table dimensions 525 x 160 mm (without plate, the plate you can see in the photos was glued on) Table dimensions on pulley 320 x 280 mm Suction nozzle Ø 100 mm Motor power 1.1 kW Connected loads 400 V, 50 Hz, 3~, 2.5 A Dimensions: 1,400 x 400 x 1150 mm
Volpato LASM edge sander Mechanical Oscillation Constant grinding speed 1.5kw motor Grinding height about 100mm Tape length 2640mm Height 130mm Extraction spigot fi 100mm
Key data: 1340 mm, 150 mm
SPECIFICATIONS: Machining width: 1340 mm Processing height: 150 mm Steel calibration roller: Ø 200 mm Sanding belt length: 2100 x 1400 mm Installed power: 17 kW
Working width: 1.100 mmNumber of sanding units: 2 st.Workpiece thickness max.: 150 mmsanding belt measurements: 1.110 x 1.900 mmMotor roller: 15 kWMotor pad: 11 kWFeed motor: 1,5 kWFeed speed: 3 - 15 m/min.Overall size: 1.750 x 2.210 x 2.280 mmWeight: ca. 3.300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sanding machine Brand: Ecoline Type: Windsand 4 New machine for sanding panels and glued frames. Technical data: Dimensions workpieces: Min. length: 500 mm Max. width: 1600 mm Max. height: 120 mm Number of shaft: 7 pcs. Power: 12 kW Air pressure: 6-8 bar Suction studs: 5 x Ø120mm Suction power: 6000m³/h Units 2 verticale swivable brushes (left / right), Ø 350 mm, for sanding the outer sides of the panels and window frames. Power of both brushes 0,55 kW 1 Deep brush, Ø 240 mm, for sanding the inner verticale sides and front sides of window frames. Power 0,55 kW 1 upper sanding lamella roller for surfaces, Ø 420 mm; length 1600 mm. Power 3 kW 3 upper sanding discs, Ø 400 mm, for the perfect crosswise process of the the lengthwise and crosswise positioned wood fibres. Power of each disc 1,5 kW; All tools are frequency controlled. ...
New brushing machine Brand: Ecoline Type: Windsand 3 New machine for sanding panels and glued frames. 4-side processing Technical data: Dimensions workpiece: Min. length: 500 mm Max. width: 1600 mm Max. height: 120 mm Number of shafts: 6 pieces Power: 12 kW Compressed air: 6-8 bar Suction stud: 5 x Ø120mm Suction power: 6000m³/h Unit - 2 vertical swivable brushes (left / right), diameter 350 mm, to sand the profiled surface of the panels and window frames. - Power of both brushes 0,55 kW - 1 Sanding lamella roller for surfaces, diameter 420 mm; length 1600 mm. - Power 3 kW - 3 upper sanding discs, diameter 400 mm, to process the lengthwise and crosswise positioned wooden fibres . - Power of each discs 1,5 kW; All tools are frequency controlled. All brushes are equipped with quick changable sanding lamellas. All discs will be equipped ...
Machine Table size approx. 2500 mm x 980 mm
Key data: 150 mm, 7800 mm
Johansen Long Belt Sanding Machine
Manufacturer: Johannsen, Type: T 86, Year: 1991, Sanding hight mm: 350, Table width mm: 1200, Table length: 2800, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 300, 2 rotary directions: yes, Exhaust diameter mm: 130, Hight adjustment by engine: yes, Year :1991
Manufacturer: DMC, Type: UNISAND K/USK1100M3, Year: 2007, Monting of the machine: L/L/L , Equipment of machine 2: L/L/L, Double sided sanding line: yes, Sanding width mm: 1100, Number of sanding belts: 3 + 3, Weight in kg: 4050, Year :2007
