british flag
Resale Logo

Category 501: granulation plants

back back back
 banner advertisement information used metal recycling machinery  ATM Recyclingsystems GmbH  http://www.atm-recyclingsystems.com 
banner logo
start page > machines and plants for waste disposal and recycling > all granulation plants > results
 
48 offers order by
post used machinery: registration     
No. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
page 1 > 2 3
123221653
IMABE,HERBOLD,VIPLAT,CALA diverse
Recycling plant PET-waste

1200 kg/h
used machine
 
1200 kg/h
2002
Price  
    request
122971577
EXTRUDEX SRE 80 single screw
Granulating line

screw size: 80 mmCapacity: bis 120 kg/hDrive: 35 kWL/D: 30 L/Dengl.:complete granulating line for low bulk-weight materials like E-PSincl. strand-pelletizing equipment, very less operating 7000 hoursThe line is ready for ...
used machine
 
screw size: 80 mm
Capacity: bis 120 kg/h
Drive: 35 kW
L/D: 30 L/D
engl.:
complete granulating line for low bulk-weight materials like E-PS
incl. strand-pelletizing equipment, very less operating 7000 hours

The line is ready for demonstartion/test-run in our worlshop Wuppertal-Germany
Date shortly by appointment



This ad was created with MODUL MWS - the software solution of LogoTech.
1993
Price  
    request
123172637  
TECNOVA 130 mm double degassing system
Granulating plants

TECNOVA PELLETIZER 130 mm 54 L/D double degassing system Machine offered completely overhauled with 6 months warranty (photos taken before overhauling) 450/600 kg/h Just before disconnection, it was producing 600 kg/h ...
used machine
 
TECNOVA PELLETIZER 130 mm 54 L/D double degassing system
Machine offered completely overhauled with 6 months warranty (photos taken before overhauling)
450/600 kg/h
Just before disconnection, it was producing 600 kg/h with PS flakes
for PE PP PS ABS PC
screw diam. 54 L/D 130 mm
forced feeding unit for lighter material
BC motor 200 Kw + inverter (average consumption 60% in use)
# 2 degassing vacuum pumps for better quality
screen changer for 224 mm diameter screens
oleodynamic power station
# 3 electrical cabinets
die face pelletizer
stainless steel centrifuge
Vibro classifier
vent
Construction year 2007
Scrap silo available on separate quotation.
Ready in a few weeks from confirmation
Post-sale assistance available for all spare parts, commissioning, etc.
2018
Price  
  IT   request
122969441
M-I-R Kabelschredder
granulating lines

Drive: 3 x 15 kW kWmaterial: Elektrokabel Capacity: 1400 kg/hgranulating plantSchredder for cable wireMake: M-I-RYear of construction: 2013Power: 1.4 to. per hourcomplete plantThis ad was created with MODUL MWS - the sof ...
used machine
 
Drive: 3 x 15 kW kW
material: Elektrokabel
Capacity: 1400 kg/h
granulating plant
Schredder for cable wire

Make: M-I-R
Year of construction: 2013
Power: 1.4 to. per hour

complete plant



This ad was created with MODUL MWS - the software solution of LogoTech.
2013
Price  
    request
122866971
DIVERSE diverse
Granulating plants

3-stage shredding Year of construction: 2005 1 level - number of blades: 17 pieces 2 stage - number of blades: 32 pieces 3 level - number of blades: 39 units Performance of electric motors: 3 15 KW The shredding b ...
used machine
 
3-stage shredding
Year of construction: 2005
1 level - number of blades: 17 pieces
2 stage - number of blades: 32 pieces
3 level - number of blades: 39 units
Performance of electric motors: 3 15 KW
The shredding blades were completely replaced by new knife in 2014.
Production line with excess Ribbon Magnet: (plate magnets):
Year of manufacture 2004
Production line with head Magnet:
Transported material by pre-cutting to the material hopper. Year of manufacture: 2007
Material Hopper:
(Includes a discharge screw conveyor with hydraulic drive):
Built in 2007
The material bunker capacity: approx. 2 cubic meters.
Power of the pump unit is 7.5 KW
Total weight: 2000 kg
Pendulum assembly line:
"Westa" (fitted Alternately, depending on the load, both Mills on 1 line). Built in 2003
2 production lines:
(Transport of the material from the swing band to the mills)
Small mill:
Brand: Herbold, 55 KW, model year 2014
Large mill:
Brand: Able AG, 110 60/100 KW 7-3, built in 2013
Separating table I:
Built in 2005
Separating table II:
Built in 2005
After separating table:
Built in 2008
Small magnetic drum:
Built in 2008
Large magnetic drum:
Built in 2008
Cabinets:
For the control of the entire system:
Year 2013
Compressor:
10 bar power, built in 2013
various spare parts
Forklift gas Fabr.: Linde, type: H35 393-01, FG.-No.: H2X393T06004/35, year of manufacture: 2009, Protec.. BH.: 4.780, trip lex mast (188), lifting height: 5.355 mm, with Kaup side pusher B: 1,300 mm,.
Mobile excavators Fabr.: Fuchs, type: 712,.
with grabs for scrap.
Cable peeling machine serial: Pacino engineering, type: PR3 evolution, year of construction: approx. 2014
2005
270,000 €  
    request
121987549
REGALUX QJF-600
Cable granulating systems

For sale is a cable granulating system. The machine will be available from August. technical data: Voltage: 380V Frequency: 50 Hz Total capacity: 36 kW Weight: 3000kg Dimensions: 3, 5m x 2, 0 m x 2. 8 m Cable  ...
used machine
 
For sale is a cable granulating system. The machine will be available from August.

technical data:

Voltage: 380V
Frequency: 50 Hz
Total capacity: 36 kW
Weight: 3000kg
Dimensions: 3, 5m x 2, 0 m x 2. 8 m
Cable diameter: 0.3-20 mm
Power: 300 350 kg / h

the performance depends on type of cable
Operation guarantee: 1 month

The cable granulating system is suitable to various kinds of copper cables. The diameter of the cable can have up to 20 mm. Kabelschredder is very easy to operate and is very economical. You can recover up to 99.8% of the copper from the cable.

Demonstration machine costs â?¬29,000 gestezliche Net VAT The offered machine is tested prior to sale min a month. New costs â?¬35,000 net

On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must be considered.

Offer is valid until stocks last.
Before you click buy, you record please contact with us, to confirm the availability of the product.

Subject to prior sale!
2016
29,000 €  
    request
121916422
DIEBELS GBR RMH Granulator 16-22

Granulator/granulator directly from stock available! Can be used in the cable processing and cable recycling, Kunstoffzerkleinerung and destruction of plastic and plastic parts Granulator/Schneidmühle type: RMH 16 ...

 
Granulator/granulator directly from stock available!

Can be used in the cable processing and cable recycling, Kunstoffzerkleinerung and destruction of plastic and plastic parts

Granulator/Schneidmühle type: RMH 16/22 VGA _ 4 KW drive power (further data see table) other granulator/granulator on request) RMH 16/22 VGA/power: 4 KW

RMH granulator features:
-In the RMH granulator RMH, a knife set is installed.
-A sieve is fitted (drill holes on request.).
-The following filter inserts are available standard production: 1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm
-V cutting geometry
â Lenze electric motor / Schneider Electric box and breaker
-Slight tilt of the filler funnel
-Available with wheels/2 x fixed castors/2 x brake castors or adjustable rubber-mounted feet
-With various trays available 1) Insert as box, here the material out of the box out can be tilted

(2) slide down to suck the material with a radial fan,

Tube diameter 60 mm

(Centrifugal fan is not included in the delivery).

To transport (3) slide the material from the granulator out directly on a conveyor belt, 40 cm elevation works only in conjunction with a substructure

Very high flexibility of the machine by special equipment, modifications or retrofits.

Warranty 12 months.
 
4,480 €  
    request
121505217
RMH 2D Linie
Cable granulating systems

The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The mat ...

 
The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table.
The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.
 
When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly siebaufwärts in the box/conveyor belt for metal (copper). The smaller particles (plastic) swim slowly siebabwärts and dropping to the back of the cutting table.
 
Price  
    request
121505215
RMH 1D Linie
Cable granulating systems

The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The ma ...

 
The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table.
The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.
 
When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly siebaufwärts in the box/conveyor belt for metal (copper). The smaller particles (plastic) swim slowly siebabwärts and dropping to the back of the cutting table.
 
Price  
    request
120987641
INNOPLANTA Compleate plant
Sludge dryer, press, compleate plant.

Sludge dryness 6%.DS Dewatering: 22%.DS Drying: 90%DS Sludge Volume: 8,8 T/h. Dewatering: 58T/Day. Drying: 586kg/h.This plant is never used, only tested with good result. Read more under the PDF in the link. processov ...

 
Sludge dryness 6%.DS Dewatering: 22%.DS Drying: 90%DS Sludge Volume: 8,8 T/h. Dewatering: 58T/Day. Drying: 586kg/h.This plant is never used, only tested with good result. Read more under the PDF in the link.
processoverskott.se/sv-SE/slamtork-37235871
 
300,000 €  
  SE   request
110448403
PREALPINA 60 mm. foil+ flakes
Granulating plants

PREALPINA PELLETIZER for foil and flakes PE PP PC PS ABS has been running with self produced scraps including scrap silo 2,5 m3 extruder with screw diam. 60 mm. 36 L/D (replaced 2014, now 98%conditions) forced feedi ...
used machine
 
PREALPINA PELLETIZER for foil and flakes
PE PP PC PS ABS
has been running with self produced scraps
including scrap silo 2,5 m3
extruder with screw diam. 60 mm. 36 L/D (replaced 2014, now 98%conditions)
forced feeding unit
hydraulic power station
ABB a.c. motor 35 kw + inverter
vacuum degassing pump
screen changer 130 mm. diam. screens
die face pelletizer
centrifuge
vent
electric cabinet
average output 110/150 kg/h
good working conditions
year 1992
1992
27,000 €  
  IT   request
110448401
PREALPINA 105 mm.flakes

PREALPINA PELLETIZER for flakes PE PP PC PS ABShopper with dosing unitextruder with screw diam. 105 mm. 35 L/Dactual output 300 kg/h(with new screw/barrel yields 350/430 kg/h)hydraulic power stationABB a.c. motor 117 kwo ...

 
PREALPINA PELLETIZER for flakes PE PP PC PS ABShopper with dosing unitextruder with screw diam. 105 mm. 35 L/Dactual output 300 kg/h(with new screw/barrel yields 350/430 kg/h)hydraulic power stationABB a.c. motor 117 kwoil pump loop gearboxDynisco pressure unitvacuum degassing pumpscreen changer 190 mm. diam. screensdie face pelletizercentrifugevibro-classifierventelectric cabinetOffered either as is or completely reconditioned with sworn apraisal
 
Price  
  IT   request
102860882
GUIDETTI Sincro 950
Cable granulating systems

Complete compact plant for recycling of cable Guidetti Sincro 950 and Pre-Shredder Guinetti PMG 900. \Cable granulator with mobile inclined conveyor; Separate copper/plasic/aluminium, capacity 900-1100kg/hour, 51 kW; f ...
used machine
 
Complete compact plant for recycling of cable Guidetti Sincro 950 and Pre-Shredder Guinetti PMG 900.
\Cable granulator with mobile inclined conveyor; Separate copper/plasic/aluminium, capacity 900-1100kg/hour, 51 kW; full load power 120 A; 400 V; 50 hz; weight 3000 kg

The equipment is in very good condition and has only been in production for a short time.
2014
used machinery auction RESALE 35,000 €  
  FI   request
97153712
DIGICOLOR Moditec
Granulators

Used cutting mill.

 
Used cutting mill.
 
1,500 €  
  DE   request
96370389  
Film washing machine
Complete equipment and machinery to the crush, wash and granulate for sale of polyethylene films with an annual capacity of around 4,000 to off. The plant is located in West Europe; Liquidation by bankrupty. Auch ...
used machine
 
Complete equipment and machinery to the crush, wash and granulate for sale of polyethylene films with an annual capacity of around 4,000 to off. The plant is located in West Europe; Liquidation by bankrupty.

Auch Folien + Technik e. kfm. D-73773 Aichwald Tel. 0049 (711) 364341, fax 0049 (711) 363703
 
Price  
  DE   request
96039309
HERBOLD SMS 45/100 H5-2
Granulators

Technical Specifications Rotor diameter: 450 mm Output capacity: 750 - 1000 kg/h Input throat (width): 1000 mm Rotor length: 1000 mm Material separation & cyclone included Conveyor with inline ABM Tunnel Metal Det ...
used machine
 
Technical Specifications
Rotor diameter: 450 mm
Output capacity: 750 - 1000 kg/h
Input throat (width): 1000 mm
Rotor length: 1000 mm
Material separation & cyclone included
Conveyor with inline ABM Tunnel Metal Detector included.
Other Specifications
Installed power 75 kW
Number of rotor knives per cutting line 2 pieces
5 Cutting lines
10 rotor knives as a whole
2006
Price  
    request
94498827  
DIVERSE several
Repelletising plants

Complete plant for the recycling of thermoplastic polymers, starting with shredder, wash, granulate up to the package or produce a finished product. It is qualified consulting of one engineer with 14 years experiences fo ...

 
Complete plant for the recycling of thermoplastic polymers, starting with shredder, wash, granulate up to the package or produce a finished product. It is qualified consulting of one engineer with 14 years experiences for film Recycling and film extrusion for high security of the Investment available.


Auch Folien + Technik e. Kfm. D-73773 Aichwald
Tel. 0049 711 364341, fax 0049 711 363703
 
Price  
  DE   request
91028524
PREALPINA 160 mm. 35 L/D
Granulating plants

OMP PREALPINA 160 mm. this line is offeres either as is or completely reconditioned recycling extruder for PP PS PE ABS PC, etc. storage silo for scraps with extraction auger and agitators forced feeding unit with a ...
used machine
 
OMP PREALPINA 160 mm.
this line is offeres either as is or completely reconditioned
recycling extruder for PP PS PE ABS PC, etc.
storage silo for scraps with extraction auger and agitators
forced feeding unit with adjustable speed,
extruder with 160 mm. screw , 35 L/D
vacuum pump degassing unit,
d.c. engine 330 kW,
hydraulic screen changer for 300 mm. diam. screens,
hydraulic power station
die face pelletizer,
drying centrifuge.
roto-classifier
control cabinet
2007
Price  
  IT   request
86536009
ICMA SANGIORGIO 110 32D
Granulating plants

The extruder ICMA SAN GIORGIO 110 32D year 1993 has sold together with following equipment N.1 Cutting Head GAMMA MECCANICA model TAGLIO Type TF1000CPV year 2002 and cooling centrifuge complete of pipes; N.1 Changing f ...
used machine
 
The extruder ICMA SAN GIORGIO 110 32D year 1993 has sold together with following equipment
N.1 Cutting Head GAMMA MECCANICA model TAGLIO Type TF1000CPV year 2002 and cooling centrifuge complete of pipes;
N.1 Changing filter BDPLAST diameter mm 250;
N. 1 Vibrating Screen with 3 ways expulsion TECNO INDUSTRIALE 2000 mod. VCM.80.A.16.18.C;
N. 1 Blower LORANDI SILOS mod. L75;
N.1 Fume collecting equipment;
N.3 Dosers for raw material; BRABENDER DBW-G1/350 year 1997 with electrical panel;
N.2 Dosers for additives BRABENDER DDW-H31-FW33-35 year 1997;
N.1 Doser for calcium carbonate BRABENDER DDW-H32 year 1999;
N.1 Doser for minerals BRABENDER DDW-H32-FW79/O-150 anno 1997;
N.1 Blast of dust INFASTAUB mod. AM301v34;
N.1 Cochlea ZAMBOLIN T120A;
N.1 Chiller NOVA FRIGO R65 N.1 Chiller NOVA FRIGO R105 N.1 INDUSTRIAL FRIGO BAL 4/GN anno 1999 N.1;
N.1 Tower;
1993
Price  
  IT   request
81649974
NGR S:GRAN 85 V HD
Repelletising plants

Material that can be processed: LDPE, HDPE, LLDPE, LD/LLD/HD-PE film, scraps, partly printed clean, wastes Screw diameter: 85 mm Outpu up to 300 kg/h, depending on type of material and feeding rate Screen changer: Ye ...
used machine
 
Material that can be processed: LDPE, HDPE, LLDPE, LD/LLD/HD-PE film, scraps, partly printed clean, wastes
Screw diameter: 85 mm
Outpu up to 300 kg/h, depending on type of material and feeding rate
Screen changer: Yes
Pressure sensor: Yes
Conveyor belt: Yes
Degassing: Double degassing
Power: Voltage: 3 x 400V + N + Pe
Installed power: 200 kW

Attachments and Accessories:
Metal detector
Roll feeder
Hot granulation Die face cutter
Water bath
Centrifuge
Extraction blower
Cyclone

Can be seen in production.

We can assist you with dismantling, loading and transport.
2007
Price  
  DK   request
page 1 >
You didn't find your wanted machine? to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country