• 34 kW, 415 V / 50 Hz, 65.5 A full load current • 528 rpm rotor • Approx. 3,520 kg • Serial no. GSC50502110001 • CE marked • Serviced by Summit Plastics Automation – new blades fitted June 2026 • Fully working – can be seen running • Buyer collects – loading provided at our Wymeswold site, Leicestershire A 2022 Zerma GSC 500/500 granulator – a recent machine, recently serviced with new blades. Zerma granulators are widely used in plastics recycling and moulding shops for turning scrap, rejects and post-industrial waste into clean, consistent regrind. When choosing a used granulator, check the screen size, rotor and blade condition, motor power and feed opening against the material you need to process. A well-matched granulator turns sprues, runners, rejects and post-industrial scrap into a consistent regrind that can go straight back into production ...
• German-built AMIS-Zerma machine, 2011 • CE marked • Free-standing control panel (ammeter, start/stop, E-stop) • Fully working – can be seen running • Buyer collects – loading provided at our Wymeswold site, Leicestershire A 2011 Zerma GSE 300/600 granulator. Zerma granulators are widely used in plastics recycling and moulding shops for turning scrap, rejects and post-industrial waste into clean, consistent regrind. When choosing a used granulator, check the screen size, rotor and blade condition, motor power and feed opening against the material you need to process. A well-matched granulator turns sprues, runners, rejects and post-industrial scrap into a consistent regrind that can go straight back into production or be sold as a reprocessed material. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you ...
ZERMA GSE 700 plastic granulator machine manufactured in 2018, is used in the processing of lightweight plastics such as PE, PP or PVC. The granulator has a specially shaped hopper with splash protection, inside of which there are fixed knives and a rotor with knives arranged in a ‘V’ shape. The rotor is driven by a slide-rail-mounted electric motor with tension-screw adjustable V-belts. The ZERMA GSE 700 plastic granulator machine can even cope with larger pieces of plastic, such as lumps and film rolls, thanks to the use of a deflecting wedge and block knives to prevent the rotor from blocking. All of the machine’s components are mounted on a base frame, fitted with mounting pads to dampen noise and vibration.
Main Machine - ZERMA ZPS 2000 - Type: single shaft shredder (Einwellenshredder) - Drive power: 2 x 55 kW - Frequency converter: included (1 unit) Conveying Equipment Included - Discharge Belt Conveyor - Type: WF 4000 x 2500 x 580 - Drive: 1.5 kW - Inclined Belt Conveyor (mounted at shredder) - Belt width: 980 mm - Centre distance: 5000 mm - Belt type: PVC with cleats - Safety features: emergency stop rope and safety stop - Drive (right-hand): 1.5 kW Spiral Conveyor - Type: HS 450 NW 560 - Manufacturer: BULCOTECH - Drives: 0.75 kW / 11 kW / 5.5 kW / 11 kW Magnetic Separation - Drum Magnet (1 unit) - Overhead belt magnet: DM01.60 - Design: ferrite - Drive: 1.5 kW - For belt width: 600 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Zerma Model: GSE 700/1000 Year of Manufacture: 2021 Inlet dimensions: 720 x 990 mm Rotor diameter: 700 mm Working width: 1000 mm 7 x 2 rotor blades 2 stator knives Sieve insert: 10 mm Ø Drive 75 kW, 1500 rpm, IP 55, 400 V, 50 Hz, IE3 The machine has not yet been assembled or put into operation and is therefore in mint condition. Feed Belt (Bias Belt 1) - Length (AA): 6000 mm - Width (GB): 980 mm - Drive: 1.5 kW - PVC stud belt with lower belt cover - Equipped with 2 × emergency stop buttons Switchgear - Load-dependent control - Mounted on a separate frame Extraction System – MFT 55/500 - Power: 11 kW - Pipeline: NW 200 mm Ø - Rack for bagging into double big bags - Cyclone: 800 × 2400 mm - Exhaust box with 12 exhaust hoses Metal Separator - NW 150 mm Ø - Quantity: 1 piece Fine Material Separator – Type FAS 500 - With MFT 30/300 blower (4 kW) - C ...
ZERMA PM 500 PVC PULVERIZER, average throughput rate 500 kg/h, Disc diameter: 500 mm, 24 kW drive, Total installed power: 79 kW (200 A), including metal detector, Vibrating screen, 2-place big bag filling station, Loading screw and cyclon, Centralized dust extraction system Donaldson TDS8 year 2018, N.2 new spare discs, Complete valve and piping system, Test possible, installed power - used power in work: about 60-65% : 79 kw, conditions: testable
