used Cable granulating systems for sale

Used, heavy and high-performance recycling plant for the recycling of old cables. The machine has a granulator with a knife length of 500 mm and a large cutting table. As a result, the Sincro 530 from Guidetti achieves hourly outputs of 450 to 600 kg (manufacturer's specs). The system was traded-in by us and all essential components were checked in the workshop. The machine works reliably and trouble-free. On request, the system can be equipped with pre-shredders and conveyor belts. Feel free to visit us and get your own impression of the machine. You are also welcome to test the machine with your cable material.

Young used machine with very few hours of operation. Compact cable recycling plant with low connected load for 80 - 120 kg/hour (depending on material) This system can be operated with a pre-shredder via a conveyor belt as well as in direct insertion. The system still has the original, unground set of knives, so it can hardly have more than 40 to 50 operating hours. Therefore, we offer this system including a 12-month used machine warranty. Pre-shredders, conveyor belts, dosing accumulators, etc. can also be obtained from us.

Compact but powerful machine for processing old cables up to approx. 25 mm in diameter. The nominal output of the system is 120 kg/hour when using a 4.0 mm perforated screen. By using a pre-shredder, the performance can be significantly increased, then stronger cables are also possible. The machine has been checked and modified in our workshop. - new dividing table - new set of knives - new sieves - new seals - Connection for refrigeration unit - Connection for feed and conveyor belt On request, we can supply additional accessories for the machine, such as: - Pre-shredder -Magnetic drum - Dosing accumulator - Refrigeration unit - Dust filter - Screening drum - Bigbag stand with air conveyance for plastic granules

Machine for processing mixed old cables including fine conductors and stranded cables, Due to the special rotor system and the large flywheel masses, the system is also suitable for operation in manual insertion. The machine is equipped with a cooling unit that optimizes the granulator with a flow temperature of 0.5 °C for the use of heat-sensitive cables, such as NYM etc. The control electronics of the system enable fully automatic operation in a line with pre-shredder, conveyor belt, dosing accumulator, etc. The machine includes several sets of knives and different screens.

Cable recycling plant with many innovations in all plant components for up to 600 kg/hour (depending on material) The basis of this recycling plant is modularly constructed from strong and innovative individual components. In the standard version, the following structure is obtained. - Preshredder MR 4080 or MR 40-100 - Conveyor belt with magnetic separator - controlled by PLC - Granulator C 600 with axle length 600 mm, 5 rotor blades and 37 kW drive, cooling of the housing by unit against adhesions - Z-separator for the separation of heavy copper or 1 granulate - Dosing drum for the optimally uniform feeding of the following turbine mill - Ghibli 545 turbine mill (new model), optionally with coolable housing and inverter control - SA 600 separation table, new version with PLC inverter control of the air volume + eccentric drive with inverter control of the oscillation + adju ...

Used cable recycling plant Tecnoecology T 250 Turbo Year of construction: 2008 The plant consists of the following parts: - Pre-shredder: Bano MAC 630, approx. 250 - 400 kg/hour, depending on material - Conveyor belt to the dosing accumulator, approx. 4.0 m - Dosing accumulator with discharge conveyor, approx. 1.5 m³ - Controlled conveyor belt with belt magnet for feeding the granulator, approx. 4.0 m - Granulator GA 400/30, approx. 250 - 400 kg/hour, depending on material - Turbine mill, T 25-2, built in 2019 - Separator TV 300, inverter controlled, separation table 80 μm - Dust extraction and filter system The entire system currently achieves between 200 and 300 kg/hour in operation, depending on the cable composition. On request, additional components, such as a big bag loading for the plastic or the re-screening of the granules, can be supplied. The plant is curre ...

The IRS 120 Easy is the perfect entry point into cable recycling. The special combination of large flywheels and multi-part segment cutting knives makes it possible to efficiently recycle old cables made of copper or aluminium even without high power consumption and without shredding. The machine impresses with its small footprint, is easy to maintain and easy to use. Compared to most of the competition's systems, the machine has two separate fans for separator air and dust removal. This eliminates the usual interactions between more or less clogged filters and the purity of the copper granules. In addition, the separator air is not roughly adjusted via throttle valves, but by sensitive adjustment of the fan speed. This gives you the best qualities in finished copper. This machine is an immediately available storage machine and has 4 screen inserts, electronic pre-equipment for ...

Cable granulation system RMH 2 D Granulator: 11 KW Connection value: 19.6 KW Weight: 2.450 kg Capacity: 100-250 kg/with shredder up to approx. 300 kg/H Optionally available with shredder/belt system with permanent magnet

The cable pelletizer system comes from the Turkish machine manufacturer GEM and has a processing capacity of up to 1,000 kg of old cable / hour. The machine has the following components: 1.Conveyor belt to shredder: 2.2 KWA motor power / 5.5m long 2. Shredder: CE certificate: TS 1000 / pressure 100 bar / 75 kWA /145HP engine power / capacity: 800 – 1200 KG / hour 3. Conveyor belt from the shredder: 2.2 kWA motor power / length 6 m 4. Spiral bunker and spiral conveyor: 3.0 kWA motor power / length 3.5 m 5. Hopper to granulator: 3.0 kWA motor power / length 5.2 m 6. Granulator: CE certificate: TR 1000 - 5 / 110 kWA motor power / capacity: 800 – 1200 KG / hour 7. Screw fan: 11 kWA motor power / number of revolutions: 3000/minute 8. Helix Silo: 1.5 kWA motor power 9. Separator plastic of copper: 0.55 x 2 kWA motor power 10. Magnet separator: 0.55 kWA motor power 11. Filter ...

Recycling machine trade AGICOM- Pedergnana OG: Cable recycling plant used consisting of single-shaft shredder MR1740; Granulator CGM4050; Zig Zag Separator; Turbine mill Ghibli 352; separator, filter tower; Throughput approx. 300 kg/h. Details on request!

Recycling machine trade AGICOM- Pedergnana OG: The Easy 120/180 is a high-performance recycling system for the extraction of copper and/or aluminium from old and residual cables. The machine is characterized by a small footprint, simple operation and low energy consumption. Feed material: Electrical cable without impurities Throughput: approx. 60 to 120/180 kg/h

Cable pelletizing machine V-C03 CE and UVV approved, max. 30-50 KG/h, 0.1-30mm diameter of cables, weight 515KG, L 1000 X W 580 X 1,700 mm, 5.18 KW, 1 year warranty, easy to move with heavy-duty castors, available from 12 KW ex location D-57223 Kreuztal. 8.900€ plus 19% VAT

recoem GDS-150 Year of construction : 2023 Condition : New Total power : 11 kW Throughput : approx. 150 kg/h Accessories : 2,3,4 hole sieve Dimensions : LxWxH 1615x1315x2110 mm Total weight : 1300 kg A compact recycling plant with 3 rotating 2 fixed knives. The design and precision of the cutter chamber can be reliable and versatile to achieve high standard performance with low consumption. Simple control panel with buttons. If you have any questions, just get in touch.

recoem GDS-460 Challanger with air filter tower and turbo mill Year of construction : 2021 Condition : New Power : 22,5 kW motor Total power : approx. 48kW Throughput : 400kg/h Accessories : 2,3,4,5,6 hole sieve Dimensions : LxWxH 3000x1500x2200 mm Total weight : 3600 kg Rotor dimensions : L x diameter. 460x400 mm A compact recycling plant Model Challenger GDS 460. Single shaft cable breaker with 15 rotating 2 fixed knives. The design and precision of the cutting chamber can be reliable and versatile to achieve high standard performance with low consumption. Simple control panel with buttons. If you have any questions, simply contact us.

For sale is a cable granulating system. The machine will be available from August. technical data: Voltage: 380V Frequency: 50 Hz Total capacity: 36 kW Weight: 3000kg Dimensions: 3, 5m x 2, 0 m x 2. 8 m Cable diameter: 0.3-20 mm Power: 300 350 kg / h the performance depends on type of cable Operation guarantee: 1 month The cable granulating system is suitable to various kinds of copper cables. The diameter of the cable can have up to 20 mm. Kabelschredder is very easy to operate and is very economical. You can recover up to 99.8% of the copper from the cable. Demonstration machine costs â?¬29,000 gestezliche Net VAT The offered machine is tested prior to sale min a month. New costs â?¬35,000 net On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must  ...

The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...

The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly  ...

STOKKERMILL K750 cable granulator-separator machine FROM STOCK! Manufacturer: STOKKERMILL (Made in Italy) Size: 120x120x180 cm Weight: 750 Kg Power: 7,5 Kw Capacity in input: 90-110 kg/h Table dimensions: 250x800mm Range of diameters: 1 a 35 mm Description Wire shredder for electric cables e-scrap K750 – A concentrate of techncology. Dry densimetric table cable shredder for the recycling of copper electrical wires. Wire shredder for electric cables K750 is the last model of the manufacturer Stokkermill Recycling Machinery in the segment of small solutions for the recycling of electrical cables and wires. Thanks to the accurate engineering research Stokkermill is able to offer a "small but great" machine at an affordable purchasing price with the lowest maintenance cost. Both the sizes of the mill, with 3 rotating and 2 stationary blades, and the dry densimetri ...

Recycling machine trade AGICOM-Pedergnana OG: The T150 cable recycling plant is suitable for the recovery of copper and aluminium from electrical cables. The T150 is equipped with an integrated turbine mill and also with a zig-zag separator - a novelty in this size! Due to these integral components, the T150 system is also ideally suited for the processing of mixed and stranded cables, as well as data conductor or EDP cables. Specifications Feed material: Mixing cable iron-free Throughput: up to approx. 150 kg / h

KG 50 Year of construction 2023 Condition new Description cable shredder,cable granulator Technical specifications Shredder power 380 V 4 KW Total power 5.18kW Range 3 - 30mm Weight 515KG Can be inspected in Hungary 8000. Available immediately from stock.