subcategories
(3rd category level)
Manufacturer:
(Category: 207)
IMA COMBIMA K/II/R75/760/V/R3 edge banding machine was built in 2000 in Germany by IMA-Maschinenfabriken Klessmann GmbH. The machine is used in woodworking workshops and furniture manufacturing companies, where it is used for the precise edge-banding of components made from chipboard, MDF and laminated materials. The durable bond between the board edge and the edging contributes to the aesthetic appearance of the finished components, whilst also increasing their resistance to mechanical damage and moisture. The edge banding process begins with heating the adhesive to the correct temperature, and then applying it evenly to the edge of the board. At the same time, the edging is precisely pressed against the surface with rollers. Maintaining the correct temperature and constant pressure ensures the adhesive bonds evenly along the entire length of the component, guaranteeing a high-qualit ...
: 0,4-8 mmWorkingpiece thickness from to: 8-60 mmTotal length: 4930 mmFeed speed: 10 m/min.total power requirement: kwWeight: 1500 kgControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Equipment: - Joining milling unit - Gluing part with pressure zone - Cross-cut unit - Radius/chamfer/flush milling machine - Shape milling unit (2-motor) - Profile scraper blade - Wing scraper blade - Buffing unit - Release agent spray unit - Detergent spray unit Technical data: Workpiece: Workpiece thickness min. 8 mm (or 12 mm with profile scraper), max. 60 mm Workpiece length min. 150 mm Workpiece width min. 150/65 mm with workpiece thickness 25 mm Smallest workpiece 65 x 300 mm / 150 x 300 x 19 mm Edge material: Edge thickness 0.3 - 3 mm Edge height 12 - 65 mm Edge length min. 200 mm Max. edge cross-section: Roll 150 - 180 mm, strip 480 mm Machine data: Length 6,630 mm Width 2,050 mm (hoods open) Height 1,700 mm (hoods closed) Min. distance to the wall: 1,000 mm (aggregate side) Weight: approx. 3000 kg Upper edge of chain conveyor 900-930 mm Workpiec ...
: 0.4-5 mmWorkingpiece thickness from to: 10-50 mmTotal length: 2730 mmFeed speed: m/min.total power requirement: kwWeight: 720 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0,4-5 mmWorkingpiece thickness from to: 6-45 mmTotal length: 4130 mmFeed speed: 11 m/min.total power requirement: kwWeight: 1250 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0,4-3 /8 mmWorkingpiece thickness from to: 10 - 60 mmFeed speed: 8 / 12 m/min.: Ja Flush/radius/chamfer milling units: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0,4-3 / 10 mmWorkingpiece thickness from to: 10 - 60 mmTotal length: ca. 5.100 mm mmFeed speed: 18 m/min.total power requirement: 13 kwWeight: ca. 2.000 kgPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Spraying device: Ja Buffing unit: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0,4-3 mmWorkingpiece thickness from to: 8-45 mmFeed speed: 9 m/min.total power requirement: 14,5 kwworkpiece length - min.: 140 mmPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Buffing unit: Ja Spraying device: Ja : ca. 75.400 : ca. 59.300 mlength in total: ca. 4.700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HolzHer 11334 Arcus Edegbander Manufacturer: Holz Her Type: 1434 Arcus Year: 2010 Machine number: 770_0_912 15500554 Controll system: Computer control -NC servo-axis control Control panel: PPC 231 15″touchscreen, USB, Ethernet Edge material thickness: Roll: 0,4 – 3 mm, Striplengths: 0,4 – 8 mm Edge material witdh: 65 mm Workpiece thickness: 6-60 mm Workpiece width: Min. 60 mm Workpiece length: Min. 180 mm Cutting edge material: Max. 3 mm Feed speed: Variable 10-12 m/min Round-end: 10 m/min) Machine configuration: Product guidance fence: automatic positioning 1802: Pre-milling Tooldiam.100mm, height 43mm, 2 2.0 KW 1903: Automatic edgeband infeed with band-clipping and fixed lengths magazin ø820 mm 1906 MG: Holzher Gluejet (cartridge 330 gr & Pallets 1,4 KG), 1.9 KW voor PVA en PUR-lijm 1913: Pressure zone with 1 driven and 2 free running rol 1918: Cut saw, straight and angle adjus ...
