used Edge gluing machines for sale

Description: serial number: 6294 , edge thick: 0,4 - 3 mm edge thick with L-Tec: 0,7 – 3 mm min. panel lenght without rounding unit: 70 / 120 mm min. panel lenght with rounding unit: 95 mm installed power: 10 kW min. panel width without roundin unit: 95 mm min. panel width with roundin unit: 120/250 mm max panel thick with pre-milling Unit: 60 mm max panel thick with rounding unit: 60 mm max panel thick without pre-milling and rounding unit: 60 mm min panel thick: 10 mm working speed: 11 - 18 mt/1’ dust outlets: Nr. 02 Ø 150 mm pneumatic operating pressure: 6 ATM , supply 400 V, 3 phases, 50 Hz , current 9 A d please also have a look at the pdf files of this machineserial number: 6,294, edge thickness: 0.4-3 mm, workpiece thickness: 10 mm, feed: 11-18 m/min, control: BM PCS12, total power approx: 10 kW, Approx. Onsite Dimension. (l x w x h): 5,700 x 850 x 1,800 mm, we ...

Description: serial number: 1000037819 min. plate height: 8 mm max. plate height: 50 mm min. edge height: 12 mm max. edge height: 54 mm roll edge thickness: 0.4 - 3 mm edge thickness in strips: 1 - 5 mm power: 7.1 kW  , equipment: , RT01 pre-milling unit - 2 engines 1.3 kW (each) SP01 gluing unit IT01 crosscut set - 1 0.3 kW engine with 2 saws RF01 finishing milling unit - 2 motors 1.3 kW each AR01 corner rounding unit - 1 motor 0.3 kW RB01 edge cyclin glue scraper RC01 SZ01 brushing unit - 2 motors 0.25 kW (each) , power supply voltage 400 VAC note: other machines, warehouse equipment visible on the photos are not included in the sale. serial number: 1,000,037,819, edge thickness: 3 mm, gluing unit: SP01, total power approx: 7 kW, Approx. Onsite Dimension. (l x w x h): 6,000 x 1,500 x 1,500 mm, weight approx.: 1,000 kg

Technical details: - Premilling Unit - Corner Rounding Unit - Maximum panel thickness: 65 mm - Operating Units: 9

Description: serial number: 36789 Technical specifications: total installed power 33 kW, 63A, 50Hz panel length - min 150 mm - max 3200 mm panel width - min 120 mm - max 3200 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.30 mm to 3 mm workpiece thickness from 10 mm up to 60 mm edgebanding strip height - min 15 mm - max 65 mm working line height 950 mm panel projection from drive belt 50mm adjustable feed speed from 10 m/min up to 24 m/min motorized height adjustment CNI control, display replaced with a flat screen anti adhesive spraying device joint cutting unit, 2 x motor 5kW, 12.000 rot/min edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated 2 gluing units: 1 unit that apply the glue on the panel edge and 1 unit wich apply glue on the edge, for softforming applications. These units must change depending on the des ...

Description: Edge Bander: STREAM B1 8.0 with LIGMATECH ZHR 05 BOOMERANG Return System Machine Specifications STREAM B1 8.0 S/N: 20798 Distance between centers: 8000 mm Total length: 9200 mm + Return Panel length: min 150 mm - max 3200 mm Panel width: min 100 mm - max 3200 mm Panel height: min 10 mm - max 60 mm Thickness of edgebanding strip in rolls: min 0.3 mm - max 3 mm Thickness of edgebanding strip in strips: max 20 mm Edgebanding strip height: min 15 mm - max 65 mm Working line height: 950 mm Panel projection from drive belt: 35 mm Drive track speed of advance: min 10 m/min - max 24 m/min Suction air speed: 30 m/sec Air supply pressure: 7 ÷ 10 bar Machine length: 9140 mm Width: 2600 mm Height: 2100 mm Return System Specifications LIGMATECH ZHR 05 BOOMERANG Longitudinal Processing Panel length: 300 - 2500 mm Panel width: 60 - 800 mm Cross Processing Panel length: 300 - 800 mm P ...

EDGE BANDING machine BIMATIC B 220 IR-S second hand machine for edging veneer, PVC, Abs , wood volt. 220 ( 3 phases ) . by applying a 9 kW electric transformer the machine operates at 380 volts. composed by : 1. glue pot 2. edge cutting shear 3. end trimming unit 4. trimming unit / tilting chamfering unit technical details : edge thickness min. / max. mm. 0,4 / 10 panel height mm. 60

BRANDT KDF 660 Profiline single-sided edge banding with joint milling, pre-milling, fine milling, 2-fold corner copying, radius drawing blade, flat-drawing blade and babble units Type: KDF 660 Profiline Specifications: BRANDT KDF 660 Profiline with joints and corner rounds Preheating of the tool stucco IR preheating Edge thickness 0,4 - 15mm Banding height max. 66 mm, with program high adjustment Caps from the roll at 3mm thickness max 45mm height or 0.8 65mm Plate thickness max. 8-60 mm for corner copying max 40mm Control PC20+ link control (loss of contact), with modem for remote service/maintenance 1. Joint unit program Adjustment of the infeed line 2. Bandkapmesser 3a. Radiant heater High-strength bonding by workpiece preheating 3b. Spray anti-adhesive 3c. Quickmelt Glue Mel Mel Application Unit with Quick Change 3d. Leimangabe by means of glue rol ...

Key data: 3 mm, 50 mm, 4150 mm

I am selling a fully equipped edge banding machine BRANDT Ambition 1220, built in 2010: Configuration: Manually adjustable entrance stop Manually adjustable joint milling Edge Banding EVA Glue Manually adjustable material pressure zone Pneumatically adjustable cross-cut saws Radius milling top + bottom manually adjustable Round unit 1 motor manually adjustable Radius scraper R2 pneumatically shut-off Control panel Working height adjustable by servo motor Material height 8-50mm Edge material thickness 0.4-3mm Feed speed 10m/min. Overall length including feed plate 4150mm Total weight 1320kg Very good condition, fully functional!

Description: Overview of the unit configuration: Joint trimming unit/copying unit/scraper blade unit/buffing unit/ Cross-cut saw unit -Feed rate: 11 m/min -Workpiece width min: 70mm -Glue thickness max: 8mm -Glue height max: 65mm -Thickness of roll material max: 3mm -Workpiece thickness: 8-60 mm -Edge material thickness: 0.4-8 mm PRICED IN WORKSHOP RECONDITIONED TOP CONDITION! SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly pointed out that this lot only corresponds to the scope of the lot description. If objects can be seen in the photo that are not expressly listed in the lot description, these are not part of the sale. part of the sale. This naturally also applies to tools, additional equipment, accessories, software, operating equipment, etc. (in relation to the photo and lot descript ...

Edge banding machine with joint/form milling machines Brandt Highflex 1220 FC YOC 2015 Workpiece thickness 8 - 60 mm Edge thickness 0.4 - 3.0 mm Feed speed 10 m/min Joining Milling – DIA Tools Gluing unit Contact heating shoe Pressure zone Pneumatic Package Cross-cut unit Flush milling unit Profile drawing blade unit Schwabbelaggregat Electronics control Machine length 4200 mm Machine dimensions W x H 1300 x 2180 mm Weight 1400 kg

Key data: 12 mm, 55 mm, 4985 mm

Due to a shortage of personnel or the abandonment of the joinery, we sell our Brandt KD 83 edge banding machine with the following technical data: Overall length: 4985 mm Net weight: 1700 kg Workpiece thickness: 10-55 mm Workpiece length: min. 160 mm Workpiece width: min. 65 mm Edge thickness: 0.4-12mm Roll cutting: 3x45 or 0.8x60 Feed: 13 m/min Connection: 400V/50 Hz Pneumatics: 7 bar The machine was overhauled in June 2021 by Kaul from Düsseldorf for EUR 5,415.94 net (invoice attached). A cabinet, WxDxH=1130x680x1960 mm, including several hundred meters of ABS edges without hot-melt glue, is also included in the offer (see photo no. 13+14). The machine is ready for operation and can be tested extensively. A forklift for loading onto a truck is available. Transport with our 7.5t truck is also possible by arrangement, but a forklift or ramp would have to be avai ...

Edge glue Brandt Type: KD 86 Built: 1993 Edge thickness up to 12 mm Glueing of roll up to 3 mm with pneumatic cross-cut station Glued part with Quickmelt pre-melting tank Heavy pressure zone with one driven and three reprint rollers Saw cutting station for the front and rear overstanding Milling station flush / chamfer Second milling station radius milling R 3 mm Corner copying with pass Radius drawing blade R 3 mm Chip catching box Schwabbelstation Pneumatic package for post-processing agregates Extendable support for large parts Control panel at eye level Space requirement approx. 6100 mm

One-sided edge gluing machine in right version for hot melt adhesive gluing. equipment: - Glued part for hot melt adhesive granules - Autom. Edge magazine with roller plate - Pre-cap scissors - Pressure zone with hooded pressure roller and 2 trailing rollers - centrally adjustable upper pressure - Cap unit 2 x 0.27 kW - Büdig milling unit 2 x 0.35 kW - Drawing blade unit for PVC edges (chamfers/rounds of pre-milled PVC edges) - Swib ledunit 2 x 0.18 kW specifications: Edge thickness 0.4 - 5 mm Roller separation max. 3 x 30 mm (PVC) or 0.8 x 60 mm Workpiece thickness 10 - 50 mm Workpiece width min. 70 mm Workpiece length min. 160 mm Feed 11 m/min. Electric400 Volt - 3 Ph. - 50 Hz Connection value approx. 5 kW Pneumatic connection 6 bar Total length 4000 mm Weight approx. 1050 kg

Edge banding machine Brandt Optimat KDF 1600 GC YOC 2009 Edge thickness 0.4 - 12 mm Plate thickness 8 - 60 mm Feed 12 m/min Inlet ruler adjustable Pneumatic package Automation package Quickmelt Premelting Unit Joining milling unit 2 x 2.2 kW Cross-cut unit chamfer / Straight 2 x 0.35 kW Milling unit 2 x 0.55 kW Mould milling unit 2 x 0.35 kW (2 units) Drawing blade unit with quick-change heads Surface drawing blade for glue joint Schwabbelaggregat 2 x 0,18 kW Electronics control Connection value 11.5 kW Machine length approx. 6600 mm Weight 2900 kg

I am selling a fully equipped edge banding machine BRANDT ProfiLine KDF 790, built in 2006: Configuration: Input stop can be adjusted by menu Manually adjustable joint milling Edge banding with preheating tank Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling at the top + at the bottom manually adjustable Radius milling top + bottom servo motor adjustable Groove saw unit at the bottom Round unit 2-motor servo motor adjustable Radius scraper blade R2 pneumatically adjustable / second set R1 included Scraper blade surface Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 20m/min. Overall length including feed plate 7860mm Mileage status 1,650,000 meters glued. Incl ...

Edge gluing machine Brandt Type: KTD 14 Built: 1996 Edge gluing machine with direct glue indication for gluing Edge materials on straight workpieces. Processing units: Install Glue indication Roller separation Flush milling Caps Workpiece thickness 10 - 40 mm Edge material thickness 0.4 - 1.2 mm Workpiece width min. approx. 50 mm Workpiece length min. approx. 260 mm Feed 6 m/min. Operating voltage 400 V+/- 10% - 3 Ph - 50 Hz Heating capacity 1.2 kW Connection value 3.04 kW Electrical connection cable length approx. 4.5 m Compressed air connection 7 bar Operating pressure 6 bar Weight: approx. 150 kg Space requirement: approx. 1800 x 1600 mm

Equipment: - Gluing part for hot-melt adhesive granules - Cross-cut saw unit - Flush milling unit at the top and bottom - Scraper unit for PVC edges - Buffing unit 2 motors - Control panel at the machine inlet Specifications: Workpiece thickness 8 - 40 mm Workpiece width min. 60 mm Workpiece length min. 140 mm Edge thickness: Fixed lengths 0.4 - 3.0 mm max. (3 x 45 mm) Roll cutting 0.4 - 3.0 mm (max. 3 x 30 mm / 0.8 x 45 mm) Feed rate approx. 9 m/min. Electrical 400 V - 3 Ph. - 50 Hz Connected load 3.8 kW Compressed air connection 6 bar Weight approx. 860 kg Machine length approx. 3075 mm

Key data: 8 mm, 50 mm, 5860 mm

I am selling a fully equipped edge banding machine BRANDT Optimat KDF 550 C, built in 2006: Configuration: Manually adjustable entrance stop Manually adjustable joint milling Edge banding EVA Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Radius milling top + bottom manually adjustable Round unit 2 motor manually adjustable Radius scraper R2 pneumatically shut-off Scraper blade surface Polishing brushes Control panel Power Control PC20+ Working height adjustable by servo motor Material height 8 - 50mm Edge material thickness 0.4 - 8.0mm Feed speed 11m/min. Assembly length including feed plate 5860mm Total weight 2660kg Very good condition, fully functional!

Single-sided edge banding machine Brandt type OPTIMAT KDF 650 C edition Specifications: • Feed rate (m/min.): 8 - 18 • Feed max. with form milling machine (m/min.): 14 • Working height (mm): 950 • Pneumatic connection (bar): min. 6 • Overall length (mm): 6,060 Workpiece and edge parameters: • Workpiece width min. at workpiece thickness 8 - 22 mm: 70 mm (depending on workpiece length) • Workpiece width min. for workpiece thickness 23 - 40 mm: 120 mm (depending on workpiece length) • Workpiece width min. at workpiece thickness 41 - 60 mm: 150 mm (depending on workpiece length) • Workpiece protrusion (mm): 38 • Workpiece thickness (mm): 8 - 60 • Edge height max. = workpiece height (mm): + 6 • Edge Material Roll (mm): 0.4 - 3 • Max. edge cross-section for PVC: 135 mm² • Max. edge cross-section for veneer: 100 mm² • Roll diameter max. ( ...

Equipment: - Quick-change gluing part for hot-melt adhesive -Auto. Edge magazine with roller plate - Pressure zone with pneum. pressurized pressure roller and 2 free-running holding pressure rollers - Power Control PC 20+ control - Adjustable inlet ruler - Joining milling unit 2 x 2.2 kW - pneum. Adjustment caps, scraper, program adjustment side strop rollers and pneum. 2-point adjustment vertical sensing rollers - Cross-cut unit 2 x 0.18 kW - Milling unit 2 x 0.55 kW - Shape milling unit 1 x 0.35 kW - Scraper unit for PVC edging - Surface puller blade glue joint - Detergent specification workpiece - Buffing unit Specifications Edge thickness 0.4 - 8 mm Roll separating max. 3 x 45 mm or 0.8 x 65 mm Workpiece thickness 8 - 60 mm Feed max. approx. 11 m/min. Electrical 400 V - 3 Ph. - 50 Hz Connected load approx. 10.5 kW Pneumatic connection 6 bar Overall length 4, ...

Equipment: - Quickmelt gluing part for hot melt adhesive - Automatic edge magazine for rolls and fixed lengths - Heavy pressure zone with driven, pneumatically applied main pressure roller and 2 free-running repressure rollers. (adjustable by program) - motor-adjustable upper pressure. - Control panel on the machine inlet. - Electronic control power control PC 20+ - Feed variable 8-14 m/min - PU overpressure rollers - Inlet ruler adjustable by program - Joining milling unit 2 x 2.2 kW - Bevel cross-cut unit/straight 2 x 0.18 kW - Milling unit 2x0.55 kW (adjustable by program) with multiple roller pressing - Mould milling unit top+bottom, 2 x 0.35 kW - Drawing blade with quick-change heads and additional device for pointed workpieces - Glue joint drawing blade - Schwabbelaggregat - Automation package for 1-milling machines, consisting of: 3175 - Pneumatic Adjustment Caps ...

Equipment: - Quick-change Quickmelt gluing part for hot melt adhesive. - Automatic edge magazine with roll plate and autom. Edge feeder - extended inlet ruler, adjustable - heavy pressure zone (with pgroamm adjustment) with a driven main pressure roller, as well as 3 repressure rollers - Motor-adjustable upper pressure. - Control panel on the machine inlet. - Electronic control PC 16 - Modem for remote service and remote maintenance - Noise protection cladding - autom. Chain track central lubrication - Interface for return (electronic) DAHR01/02/15 Aggregate assembly - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Cross-cut unit 2 x 0.35 kW, pneum. Adjustment chamfer/straight - Milling unit 0-25 degrees, 2 x 0.55 kW counter-rotation, to flush milling machine, pneum adjustable pneum. 2-point adjustment Vertical probe rollers - Milling unit ...

Equipment: - Machine stand throughout - Fixed stop side right - Paint finish Grey RDS 240 80 05 - Inlet ruler motorically adjustable, extended by 300 mm - Inlet lock pneumatically controlled - automatic edge feeder - Upper pressure: belt upper pressure - Height adjustment motorized - Position display and input centrally via the controller - Transport chain with rubber support, 80 mm wide - automatic central lubrication for the transport chain - Workpiece support in scissor design, approx. 1000 mm extendable - Noise protection equipment - Hood interior lighting 3 lamps - Control Power Control PC20+ Aggregate technology: - Joining milling unit 2 x 2.2 kW 200 Hz (60 mm joining milling cutter set) - Gluing unit A15 (workpiece preheating, QA34 application unit, infrared adhesive activation, magazine for rolls and fixed lengths, pressure zone with motorized adjustment, driv ...

for bill of exchange order unit

Brand 1110F - KDF110 Optimat Brand: Brandt Type: KDF 110 Year of construction: 2015 M-No.: 0-261-20-5386 Control: Easy Control 10+ Non-contact route control Feed controlled with start-stop optic-indicative sensors Screen: LCD, 420 letters, 4 program memories Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers/product guidance: Zentra control, 2 roller conveyors positioned opposite each other Joint milling unit: 2 x 0.75 KW 200 HZ Including joint milling set in DIA design, with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing part for hot melt glue and possibility for PU application, magazine, pressure zone with electro-pneumatic 2 point positioning via central control Pressure zone: 1st roller driven and 2 rollers running freely fo ...

Brand 1210F - KDF210 Optimat Brand: Brandt Type: KDF 210 -1210F Year of construction: 2014 Control: Easy Control 10+ Non-contact route control Feed controlled with start-stop optic-indicative sensors Screen: LCD, 420 letters, 4 program memories Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers/product guidance: Zentra control, 2 roller conveyors positioned opposite each other Joint milling unit: 2 x 0.75 KW 200 HZ Including joint milling set in DIA design, with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit A3 gluing part for hot melt glue and possibility for PU application, magazine, pressure zone with electro-pneumatic 2 point positioning via central control Pressure zone: 1st roller driven and 2 rollers running freely for good and con ...

Cross-cut unit with vertical rounding Buendingfraesen Radius Scraper Blades Buffing unit Feed rate 9 m/min

Joint milling Kappsaegen Buendingfraesen Ecik rounding Radus Ziehklinegen Straight scraper blades Schwabelln Feed rate 9 m/min

Cehisa EP-7 Edge Lijmer Brand: Cihesa Model: EP-7 Product gegevens: Edge thickness: 0.4 - 3.0mm (massief 5.0 mm) Banding height 10 - 60 mm Roll ø750 mm Panel thickness max. 8-60 mm Min. workpiece length: 120 mm Min. workpiece width: 75 mm Machine data: Control: Relay control 1. Tape capping 2. Gluing part 3. Cross-cut saw with HF motor 4. Flush milling - radius milling unit Feed: 10 m/min. Tool support radius mm Suction: MM Afzuig capaciteit: m³/hour Compressed air: 6 - 7 bar Dimensions LxWxH 2.9 1.2 1.5 mm (incl. plate 1.8 m) weight: 750 KG Electricity: 5,1 KW

I sell a new edge banding machine Cormak EBM300, year of construction 2022: LCD touchscreen display for setting the machine parameters and aggregates ON/OFF connection. Top feed belt 6 m/min. Element height 10 - 50 mm Edge thickness 0.4 - 3 mm  edge banding,  Sawing the final cut Radius R2 Milling Polishing brushes Total weight 400kg Length 2,30m (including edge plate 2,60m)! Feed zone only 1.30m long, convenient for the smallest workshop, or as an additional machine for edge banding the small work stucco quantities. New machine including warranty ratios, possible to try ! Full documentation and CE included. Available the same.

The plant description will follow in the coming days

Edge banding machine Format Tempora 60.12, year of construction 2017, S/N 202.1201717, max. power 11 kW, with control Format 4, motorized roller conveyor Barbaric TSRET 04L, year of construction 2018, S/N 2171450-1519, max. load capacity 60 kg, length approx. 3,000 mm, motor-driven conveyor belt, length approx. 5,000 mm, with mounted roller conveyor, length approx. 2,000 mm, without piping

Equipment/technical data: - Support plate for rolls - Gluing part with glue basin and pressure zone - Impact scissors - Cross-cut saw unit - Flush and radius milling unit - Pulling blade unit - Polishing unit with spraying unit - Hair dryer unit - Machine operation via touch screen - Workpiece width min. 60 mm - Workpiece length min. 140 mm - Workpiece thickness 10 - 55 mm - Roll material from 0.4 - 3 mm thickness - Strip material up to 8 mm thick - manual upper pressure adjustment by hand crank - Dimensions: 4,163 x 750 x 1,480 mm - Suction connection Ø 2 x 120 mm - electr. Connection: 400V; 50Hz; 12kW; 40.5A Technical data subject to actual equipment

Equipment/technical data: - e-Motion control with 21" smartouch instead of 10" tempora F 800 Ser - Upper pressure beam motor-controlled, adjustable workpiece height 8-60 mm - Chain feed 12 m/min, 1.5 kW, Minimum workpiece length 140 mm - Turntable edge magazine for roll edge material 0.4 - 3 mm and strip magazine for 12 pieces 10 mm edges - Edge feeding for roll and strip material - pneum. Controlled gluing unit, Teflon-coated, for 1.5 kg EVA granules, with synchronized glue roll and quick-change system. (for PUR adhesive processing, taking into account the Adhesive processing guidelines) - Pneumatically operation-controlled pressure unit e-motion (one driven, two conical contact rollers) tempora 60.12/2: 0-12mm - Impact shears for roll material - Cross-cut saw with 2 motors - Joining milling unit 2 x 1.5 kW - Upper and lower combination milling unit, 0.75 kW each, flush a ...

The workpiece return transport consists of an air cushion table with pneumatic tilting movement, complete with pusher, return conveyor with motorised belt and a not-driven roller conveyor. The panel comes out of the edge banding machine onto the air cushion table which tilts over and drops it, with the aid of the pusher, onto the return belt, situated at a lower level. The air cushion table has transfer belts to takeover the parts from the edge banding machine. Dimensions of air cushion table 1.200 x 2.400 mm Belt width 1.300 mm Installed power 3 kW workpiece return transport is deliverable for basic edge banding machine length 3.500 up to 12.500 mm

SPECIFICATIONS: Workpiece thickness max mm: 60 Edge material thickness mm: min 0.5 - max 3.0 Minimum radius border min mm: 20 Solid wood max mm: 8 Cutting scissors CW: 2.5

SPECIFICATIONS: Min. processable edge thickness mm: 0.4 Max. processable edge thickness mm: 15 Max. edge thickness mm: 60 Voltage: 380 volts Equipment: 2 tilting units / edger / brushes / glue container

Description: serial number: 201011RX000004 machine type: monolateral, left side total installed power 21,8 KW, 59A, 50Hz panel length - min 120 mm panel width - min 60 mm panel height -min 10 mm - max 60 mm edge thickness in the roll from 0.4 mm to 3 mm edge thickness for strip: 3-16mm min length for strips: 180mm minimum distance between 2 panels: 800mm edge banding strip height - min 12 mm - max 63 mm adjustable feed speed from 10 m/min up to 20 m/min motorized height adjustment CN control, anti adhesive spraying device edge feeder for roll, edge magazine for two edge rolls gluing unit for EVA adhesive, granulated pressure unit for straight edges snipping unit, 2 x motor 0,5kw, 12.000 rpm rough trimming unit, 2 x motor 1,1 kw, 12.000 rpm fine trimming unit, 2 x motor 0.37 KW-12.000 rpm corner rounding unit, 2 x motor, 12.000 rot/min profile scraper unit  , serial number: 201011RX0 ...

Description: - Hot use of pre-glued strips for finishing linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min The item that is delivered is NOT the one shown in the pictures, but an equal oneApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 470 kg

Description: - Hot gluing of pre-glued strips for finishing linear and shaped panels - Main motor 3.59 Kw -Protection against accidental burns - Height adjustable edge guide - Pre-tape rubber roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.4 - 2 mm - Min/max panel thickness 12/43 mm - Working speed: 7 m/minApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 485 kg

single-sided edge banding machine with pull-out workpiece support, end trimming unit and combi-unit. Power consumption: 400 V / 50 Hz / 3 pH / 7 kW Compressed air supply: 6 bar Dimensions: approx. 4,000 x 1.300 (1,780) x 1520 mm Edition extendable to 800 mm Working height: 820 mm Roller plate ø 700 mm

Hebrock AKV3003DK-F edge banding machine with joints and two scraper blades. Edge thickness roll approx. 0.4 - 2mm Banding up to 8mm Workpiece height approx. 8 - 45mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support Suction connection 80 +140mm Aggregates: Manual overpressure adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Edge thickness manual adjustment with SIKO counter Grooving mills with slide mills Gluing part with automatic edge retraction for rolls up to 3mm, switchable for synchronization and counter-rotation Pressure zone with 4 rollers Cross-cut saw Integrated collection container for edge pieces Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Radius scraper R2, pneumatically retractable Glue joint scraper blade can be pneumatically inserted ...

Description: Edge banding machine with jointing cutter (incl. DIA tool), PLC control (incl. touchscreen), joint milling machine (40 mm workpiece thickness) - 3 mm milling depth Combination milling station R= 2.5 mm / min. workpiece thickness 8mm with separate suction unit (from above) Gluing thickness max. 3 mm / thickness of roll material max. 3 mm separate pneum. Milling unit / cleaning station / corner rounding cutter - special version for 200mm workpiece length / radius scraper / surface scraper / Completely overhauled glue pot New jointing cutter - Leitz - WhisperCut PRICED IN WORKSHOP OVERHAULED TOP CONDITION! SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly pointed out that this lot only corresponds to the scope of the lot description. If objects can be seen in the photo that ...

Hebrock AKV3005DK-F edge banding machine with joints, corner copying and two scraper blades. Very neat machine from small business in excellent condition. Touch-screen interface with PLC control for easy operation of the machine, 12 operating programs can be saved. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support, optional equipment extendable by 950mm Suction connection 80 +140mm Aggregates: Quick-change basin with glue outlet, there are two glue basins available, both of which are included in the scope of delivery (1 basin was used for EVA glue and one for PU glue), the PU glue basin is practically as good as new, was purchased only for one order. Manual overpressure adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Edge thickness ma ...

Description: Machine no. 3465, workpiece thickness approx. 10 - 45 mm, edge material approx. 0.5 - 3 mm, joint trimming with 2 motors, single edge magazine, hot-melt adhesive application, pressure zone with 4-rollers, single cross-cut saw, profile trimming, profile scraper, single profile trimming unit, flat scraper, grooving unit, motor approx. 3 kW, control with touch display, travelling gearedge magazine with: 1 -fold roller, edge thickness: 0,5 - 3 mm, workpiece thickness: 10 - 45 mm, feed: 10 m/min, joint trimming unit: ja / yes, gluing unit: ja / yes, snipping unit: ja / yes, fine trimming unit: ja / yes, profile trimming unit: ja / yes, universal milling unit: ja / yes, flat scraping unit: ja / yes, profile scraping unit: ja / yes, control: Touch-Display, Approx. Onsite Dimension. (l x w x h): 5,500 x 1,500 x 1,700 mm, weight approx.: 1,700 kg

Brand: Hebrock Model: AKV83 Year of construction: 1992 Specifications: Edge thickness 0,4 - 5,0mm Roll ø750 mm Plate thickness max. 10-60 mm Workpiece length: min. 170 mm Connection: 230V, 40Hz Relay Control 1.Hot air (Phön) 3 KW, heat time: 1 min. 1. Caper knife - front & rear same product capping 6. Flat milling top & bottom Feed 4 m/min. Air pressure 7 - 8 bar Machine dimensions: LxHxW 1.750 800 1.250 mm (incl. plate) Machine weight: 95 KG

Equipment: -Chassis - Quick-heating glue container - Support plate for rolls - Roll capping - Cross-cut saw - Flush milling Radius/Straight/Chamfer - Suction nozzle Ø 100 mm Specifications: Power ratings: 400 V, 50 Hz, 13.3 A, 7 kW max. edge thickness 5 mm max. workpiece height 40 mm min. workpiece length 300 mm Feed speed 11 m/min Ready for use in approx. 4.5 min Work table height 900 mm Dimensions: 3,300 x 1,400 x 1,300 mm Weight approx. 550 kg All information is subject to change of the actual equipment

Description: HEBROCK F4 - Edge banding machine with combination trimming station Radius R 2.0 mm and automatic switch-off of the heating Max. Edge thickness: 2 mm / Min./Max. Workpiece thickness: 10-40 mm Min. workpiece length: approx. 180 mm / Feed speed: approx. 7 m/min. Ready for operation: 3.5 min / Power consumption: approx. 7.4 kW - Electrical connection: 400V-3Ph-50Hz Suction nozzle Ø: 1 x 120 mm complete with: Corner rounding cutter (approx. 12000 rpm) Surface scraper (without pneumatic excavation) Radius scraper with pneumatic lifting device Chassis Machine Dimensions (L x W x H): approx. 4200 x 1300 x 1400 mm Weight: approx. 750 kg PRICED IN TOP WORKSHOP OVERHAULED CONDITION! TOOLS CHANGED - SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly pointed out that this lot only cor ...

Edge banding machine Hebrock F5 with full equipment Very well maintained machine from a small business in excellent condition. Colour touch screen surface with PLC control for easy operation of the machine, 40 operating programs can be stored. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 50mm (joints up to approx. 43mm) Feed rate approx. 7m/min Noise protection hood Pull-out workpiece support Extraction connection 140mm Aggregates: Spray device release agent top + bottom Quick-change basin with glue outlet, thus fast glue change Basin can be used for EVA glue and PU glue Upper pressure manual adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Manual adjustment with SIKO counter Joint milling freshly sharpened with diamond milling Gluing part with automatic edge retraction for rolls up to 3mm Pressure ...

Code: 0806 Brand: HIRZT - ITALY Model: B 300 - CE Standard Automatic edge bander for pre-glued edges in strips or rolls: melamine, plastic laminates, veneer, etc . up to 3 mm thickness - CE Standard Composition: Motor V. 220 single-phase Pneumatic end cutting unit (shear) front and rear Blower with air filter - Power 440 W Trimming copying unit with adjustment from the outside - Motors 220 x 2 W - Trimmer speed rpm 10000 End cutting finishing unit with foot control N° 20 rollers inclined on the plane Feed motor 13 wheels V.200 single-phase - Speed 4,7 mt/min Max edge thickness mm 3 Panel thickness min/max 10/50 mm Min panel dimensions mm 70 x 140 Total absorption Kw 3,8 Digital thermometer 10-350 degrees Extensible front support Overall dimensions mm 1800 x 700 x 1300 h Weight kg 250