клеєнаносні станки б/у для продажу (581)

Чорні брати зверху і знизу клей розкидач-56inch робоча ємність- Топ-секція: гумовий покритий рулон (композитний канавок) і хром доктор рол Нижня секція: гумовий крейдований додаток рулон (композитний пазовій) і хром доктор рол З повним; натисніть кнопку магнітний стартер і охоронців 220 напруга

- Strip edge thickness from 0.40 mm to 12 mm. - Thickness of the edge in roll from 0.40 mm to 3 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Variable feed rate. - IDM PC OFFICE control. - Entrance spindle moulder group. - Edge loader for slats and roll, edge tray for one roll. - Gluing unit with boiler for granulated hot melt adhesive, with prefuser. - Pressure group with (1+3) rollers. - Cross-cutting group. - Spoke profiling group. - Shape group with 2 motors. - Milling unit tiltable from 0° to 90°, 4 KW motor. - Radius scraper group. - Tail scraper group. - Group of cleaning brushes. - LEISTER hot air blower group. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-59

- Edge thickness from 0.40 mm to 2 mm. - Thickness of the part from 10 mm to 45 mm. - Minimum piece width 90 mm. - Feed speed 6 m/min. - Retestador group. - Spoke profiling unit. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-21

- Total installed power 7.26 KW. - Thickness of the workpiece from 10 mm to 60 mm. - Variable feed speed. - Control. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+2) rollers. - Cross-cutting group, 2 x motors - Shape group, 2 x motors. - Scraper group. - Group of cleaning brushes. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-3

- Semi-automatic machine for the application of rubber edges with a \"T\" section on panels of different shapes and dimensions without the aid of counter-templates. - Retractable cutting device. - Applicator with vibration so as not to damage the edge surface. - Heater to facilitate application operation. - Retestador. - Total installed power 6.02 KW. - Thickness of the pieces from 10 mm to 30 mm. - Feed speed 5 m/min. - Table dimensions 1050 x 800 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-52

- Total installed power approx. 20 KW. - Thickness of the edge in strips from 0.60 mm to 25 mm. - Thickness of the edge in roll from 0.30 mm to 3 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Minimum width of the piece 65 mm. - Adjustable feed speed from 8 m/min to 30 m/min. - 5.50 KW advance motor. - CNI PIC 200 control. - Input spindle moulder group, 2 x motors. - Edge loader for slats and roll, edge tray for one roll. - VC34 QMS gluing unit with tank for granulated hot melt adhesive, with prefuser. - Pressure group with (1+3) rollers. - Cross-cutting group, 2 x 0.33 KW-12000 rpm motor. - Straight roughing group, 2 x 1.03 KW-12000 rpm motor. - Spoke profiling unit, 2 x motor, tilting. - Shape group, 4 x 0.33 KW-12000 rpm motor. - Milling unit tiltable from 0° to 90°, motor from 2.20 KW-12000 rpm. - Radius scraper group. - Tail scraper group. - Cleaning br ...

- Total installed power 8.80 KW. - Edge thickness from 0.40 mm to 16 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Minimum length of the piece 140 mm. - Minimum width of the piece 60 mm. - Adjustable feed speed from 10 m/min to 20 m/min. - 1.50 KW advance motor. - Control. - Edge loader for slats and roll, edge tray for one roll. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+2) rollers. - Cross-cutting group, 2 x 0.50 KW-12000 rpm motor. - Spoke profiling group, 2 x motor at 12000 rpm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-6

• Edgebander • Serial number 515/0-007 (2000) • Edge thickness in strips up to 13 mm • Edge thickness in roll from 0,40 mm up to 5 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 1,50 KW • PLC control system • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1912 pressure group with (1+1) rollers • HOLZ-HER 1918 end trimming unit, 2 x motor 0,22 KW-9000 rpm, tilting up to 10° • HOLZ-HER 1942 M fine trimming unit, 2 x motor 0,60 KW-18000 rpm, tilting up to 15° • HOLZ-HER 1929 profile scraping unit • HOLZ-HER 1940 edge buffing unit, 2 x motor 0,12 KW-1340 rpm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are s ...

- Total installed power approx. 35 KW. - Strip edge thickness up to 20 mm. - Thickness of the edge in roll from 0.40 mm to 3 mm. - Thickness of the workpiece from 12 mm to 60 mm. - Minimum length of the piece 85 mm. - Power Control PC 22, WOODCOMMANDER software. - Input spindle moulding group, 2 x 3 KW-9000 rpm motor. - Edge loader for slats and roll, edge tray for one roll. - MELER B4 EVA and PUR glue melting and applicator system, MELER STARBI touch control panel. - Pressure group with (1+6) rollers. - HOMAG HL 81 cross-cutting unit, 2 x 0.80 KW-12000 rpm motor. - Straight roughing group, 2 x 1.85 KW-12000 rpm motor. - HOMAG FK 13 L500 shape group, 2 x 0.40KW motor with tool change of 8 positions each. - HOMAG MN 21 spoke scraper unit. - Tail scraper group. - Cleaning brush group, 2 x 0.18 KW-1400 rpm motor. - Operating conditions of this machine: unchecked. - This it ...

- Workpiece thickness from 10 mm to 40 mm. - Heater. - Manual retestator group. - Upper profiling group, 0.20 KW-12000 rpm motor. - New, unused machine. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-21

- Edge thickness from 0.40 mm to 5 mm. - Thickness of the part from 8 mm to 45 mm. - Minimum length of the piece 120 mm. - Minimum width of the piece 75 mm. - Feed speed 10 m/min. - 0.75 KW feed motor. - Control. - Edge loader for slats and roll, the tray is MISSING. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+1) rollers. - Cross-cutting group, 1 x 0.20 KW-12000 rpm motor. - Spoke profiling unit, 2 x 0.55 KW-12000 rpm motor, tiltable up to 20°. - Cleaning brush group, 2 x 0.55 KW-2820 rpm motor. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-14

- Edge loader for slats and roll, the tray is MISSING. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+2) rollers. - Cross-cutting group, 2 x 0.37 KW-12000 rpm motor. - Straight roughing group, 2 x 0.37 KW-12000 rpm motor. - Spoke scraper. - Cleaning brush group, 2 x motor. - Control. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-22

⚠️ Important Note: The machine requires an overhaul by a brand technician for installation. Spare parts are supplied with the machine. HOLZ-HER SPRINT 1312 Automatic banding machine with gluing, flushing, scrapers and polishing units. Order: EdgeControl with direct keys Air pressure: 6–8 bar Voltage: 400 V Serial Number: 5010376 Accessories: glues, milling cutters, polish, hoses Dimensions (mm): 4300 × 1200 × 1600 Weight (kg) : 1000 Auction-ID: A1-47472-8

- Total installed power 8.20 KW. - Edge thickness from 0.40 mm to 3 mm. - Thickness of the piece from 10 mm to 50 mm. - Minimum length of the piece 120 mm. - Feed speed 11 m/min. - SIEMENS SMART LINE TOUCH control with touch screen. - Input spindle moulder group, 2 motors. - Edge loader, edge tray for one roll. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+1) rollers. - Cross-cutting group, 1 x 0.37 KW-12000 rpm motor. - Straight roughing group, 2 x 0.75 KW-12000 rpm motor. - Tail scraper group. - Cleaning brush group, 2 x 0.37 KW-1400 rpm motor. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-19

Important note: Machine needs a complete overhaul by technician before installation. Otherwise won't work. Equipment Type: Automatic edge banding machine for wood panels, continuous feed with electronic adjustments and multiple suction system. Manufacturer: CASADEI (SCM INDUSTRIA S.p.A.) Model: FLEXA 17 S Year: 2019 Serial Number: KK00002892 Technical description: The CASADEI FLEXA 17 S automatic banding machine is a machine designed for craftsmen and small and medium-sized companies, offering great ease of use without compromising on quality. Its robust frame and flexible units ensure excellent productivity and the possibility of carrying out any type of treatment on wood panels. Key features: • Panel thickness: 8 ÷ 50 mm • Band thickness: 0.4 ÷ 3 mm (5 mm opt.) • Edge thickness: 3 mm (5 mm opt.) • Feed speed: 7 m/min • Power supply: 400 V / 3 ph / 50 Hz • Installed po ...

Technical data Machine Type: Edge banding machine Workpiece thickness: 10 - 50 mm Edge thickness: Commercially available veneer and plastic edges Feed speed: 3 - 4 m/min Electrical connection: 220 / 380 volts, 50 Hz Connected load: 3 kW Dimensions: 1750 x 800 x 1250 mm Weight: approx. 95 kg Configuration Heating capacity: 3 kW Temperature control: Infinitely electronically controlled Temperature range: 0 - 650 °C Auction-ID: A7-47274-43

: 0,4-5 мм Товщина робочого елемента від до: 6-45 мм Загальна довжина: 4130 мм Швидкість подачі: 11 м/хв. Загальна потужність: кВт Вага: 1250 кг Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.

Holzmann KAM 55V Manual Lanten Glue Machine incl. Tools, Work Table, Vacuum Cleaners in Metal Box Clean, little-used condition Function untested Auction-ID: A1-47205-359

Auction-ID: A7-47149-6

AMBITION 1650 FC EDITION – Edge Banding Machine General data: Model: Ambition 1650 FC Edition Year of manufacture: 2018 Serial number: 0-261-71-2179 Operating hours: 25189 h Condition: Very good, in working order Weight: approx. 3000 kg Dimensions (L x W x H): 2500 x 1555 x 2300 mm Description: Industrial edge banding machine designed for precise finishing of panel edges. The Ambition 1650 FC Edition ensures efficient and high-quality processing, making it suitable for demanding woodworking production environments. Additional information: For further technical data, please refer to the attached PDF file. Auction-ID: A7-40554-4

EDGETEQ S380 – Edge Banding Machine General data: Model: EDGETEQ S380 Year of manufacture: 2021 Serial number: 0-261-73-9063 Operating hours: 17486 h Condition: Very good, in working order Weight: approx. 3000 kg Dimensions (L x W x H): 2500 x 1555 x 2300 mm Description: Industrial edge banding machine designed for precise finishing of panel edges. The EDGETEQ S380 is suitable for high-quality woodworking applications, ensuring efficient and accurate processing in production environments. Additional information: For further technical data, please refer to the attached PDF file. Auction-ID: A7-40554-3

Edgebanding machine for linear panels, serial number 10790970 Auction-ID: A7-46472-4

Used single-sided edge banding machine Brand: Homag Type: Profi KAL 330/ 9/A6/L Year of manufacture: 2011 Feed speed Infinitely adjustable 18-25 m/min Release agent spray unit top/bottom - To reduce surface contamination. Jointing unit KAL300/S2 - 2 motors, each 3 kW, Hz 9000 1/min - Motor shaft Ø 30x68 mm, KN - Electropneumatic control of both motors for joint milling. - Automatic adjustment of the joint milling cutter to the center of the workpiece. Melting unit with granulate container - Granulate container 12L - Level control of the melting quantity Lasertec activation unit standard - The gluing unit is designed so that it can be used with either EVA/PU adhesive or LaserTec. - Manual conversion from LaserTec to PU/EVA Magazine 1 roll - For solid edges, strip goods, and roll goods - Automatic strip separation via vacuum suction cup - 1 edge f ...

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Example offer direct postforming machine Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge  ...

PUR gluing Brand: GP Service Type: EASY PUR general description - PUR adhesive unit with integrated pre-melt container for a permanent zero joint - greatly reduced maintenance and cleaning costs due to PTFE coating of all assemblies (except glue roller) - suitable for flexible production capacities - order in synchronism adaptable to all common machine manufacturers: - Can be mounted directly on HOMAG machines - also in alternation with original glueing unit! - Stefani with adapter - Biesse with tag - others on request Application height 60 mm, higher on request Feed up to 30 m / min, higher on request low order quantities (

: 0,4 - 5 ммТовщина робочого елемента від до: 10 - 45 ммЗагальна довжина: ммШвидкість подачі: 8 м/хв.Загальна потужність: кВтВага: кгДані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.

0: 0,4 - 3 mmWorkingpiece thickness from to: 9 - 60 mmTotal length: - mmFeed speed: stufenlos 8 - 12 m/min.total power requirement: 15 kwDimensions (L/W/H): 4.290 x 840 x 1.690 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4 - 3 mmWorkingpiece thickness from to: 8 - 60 mmFeed speed: 8 - 14, Vario m/min.Premilling unit: Ja : Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Buffing unit: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-3 / 8 mmWorkingpiece thickness from to: 8 - 50 mmTotal length: 5.360 mmFeed speed: 11 m/min.total power requirement: 7 kwWeight: ca. 2.500 kgPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Buffing unit: Ja Spraying device: Ja : Elektrisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-5 мм Товщина робочого елемента від до: 10-50 мм Загальна довжина — 2730 мм Швидкість подачі: м/хв Загальна потужність: кВт Вага: 720 кг Дані для цієї реклами були створені за допомогою ModulMWS — програмного рішення LogoTech oHG.