subcategories
(3rd category level)
Manufacturer:
(Category: 207)
Post IMA Height: 980 mm with Motor 4,4 kW Motor shaft 35 mm diameter Inner thread M16 left Outer thread 35x1,5 right Price: not reconditioned, from stock Other version available on request
Hebrock Edge gluing machine Edge glue Edge milling machine heating Capping
PUR bag melter for processing from 2 to 3 kg PUR-DIN aluminium foil bags, Technical description: Hose connections, temperature controller PT100, 2 internal heating circuits, storage tank approx. 2.8 kg volume for bag change, 1 gear pump 7.3 cc drive via three-phase motor, glue stop shut-off direction, level monitoring for the Bag change with optical and acoustic signal, electronic Control with larsicht input (multilingual), weekly timer, digital inputs and outputs for integration to the mother machine, melting capacity adhesive-dependent, temperature reduction, Operating voltage 400 V Including - Hot glue hose length 3.5m i.D.10mm - Application head large glue outlet 5.6mm probe Pt100 - Homag cover plate QA65 with hose aging re - Switching amplifiers - Teflon probe S-506
20-09-510 Edge Banding Machine WOODLAND MACHINERY (new) Type GB/T10850 Engine power 0.18 kW Air Pressure 3-6 Bar Voltage 220 V 50 Hz Total Power 1.4 kW Heating Capacity 1.2 kW Edge width 8-50 mm Edge thickness 0.3-3 mm Feed speed 0-26 cm/s Vacuum workpiece Attraction Transport Dimensions Weight 300 kg
Type FZ-515 Thickness of panel 10-60 mm Edging thickness 0,4-3 mm Feeding speed 15 m/min Air pressure 0,8 MPa Total install power 6,5 kW Panel width ? 60mm Transport dimensions 3700x900x1700 mm Weight 1200 kg
Edge bander type STEFANI BRT UNIVER with trimming unit and automatic feeder for straight, curved and shaped panels . application of melaminic, Pvc, veneer edges, in rolls and strips Technical details: Max panel height mm 60 Edge thickness mm 0,4 - 1,5 Trimming unit 12000 rpm Automatic feeder Overall dimensions: mm 1350 x 1000 x 1150 h Weight kg 480
Automatic Edge Banding machine type OCMAC BS 21 . second hand composition : - glue pot - edge-trimming unit (2 motors) Kw 2 each one . rpm 12.000 with cabinet with HF converter Hp 5 volt. 380/50
AUTOMATIC EDGE BANDING machine type HOLZ-HER SPRINT 1411 work hours : 380 work meters : 32.000 CE mark : YES volt. 380/50 composition : 1. gluing unit with cartridge and comb nozzle 2. end trimming unit 3. edge trimming unit 4. tilting edge trimming unit 5. glue scraper
Edge gluing machine - see pictureNext:Edge gluing machine NEY-SENIOR SKM 100/3 gemaess Pictures
Machine is still in < operation and fully functional solid up to 20mm rolls PVC to 3 mm caps flush milling RADIUS milling milling Schwabbleln chamfer
GLUE SPREADER type OSAMA S2R 400 . NEW Year 2016 CE : YES Volt. 400 / 50 max. working width mm. 400 max. working height mm.100 n.02 rubber rollers
Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg
AUTOMATIC GLUE SPREADER type OMMA OPEN 1400 year 2003 CE mark : YES technical details : useful working width mm. 1400 max. working thickness mm. 80 working speed : 18 mt/min. spreading rollers diam.mm.250 dosing rollers diam.mm.185 installed power kw 1,6 weight kgs. 1200 volt. 380/50 standard details : - separate electric box - automatic cleaning device for spreading rollers - pressure-free side seals with antifriction flanges to avoid any overheating when long shifts and high working speeds are involved too - careful and sensitive adjustment of the dosing rollers by geardrives - large diameter spreading and dosing rollers - high uniformity of the spreading on full working width - separate gearmotor - collecting tank of the cleaning water - electric plant realized in accordance with high standards with low voltage on secondary circuits, all electric components in ...
Type ART. 200 Set with a single gun Pipe long 4 m Glue container 5 kg Universal nozzle Made in Italy Weight 10 kg
AUTOMATIC EDGE BANDING machine SCM OLIMPIC K 1000 second hand machine volt. 380/50 for solid wood max. 10 mm. / PVC / veneers / melamine composed by : technical details : min. panel length mm. 120 min. panel width mm. 70 panel thickness min./max. mm.10/60 edge thickness min./max. mm.0,4/10 total installed power Hp 9 composition machine : 1. lower glue pot 2. motorized roller for automatic feeding 3. edge shear 4. end trimmer unit . motor Hp 0,3 . rpm 12.000 5. top and bottom ( rough ) edge trimmer unit . 2 motors Hp 1,1 . rpm 12.000 6. top and bottom ( fine ) bevel edge trimmer unit . 2 motors Hp 0,3 rpm 12.000 7. edge glue scraper unit integral protection enclosure
Type AKV 88 F Without glue tank Max. edge thickness 3 mm Max workpiece height 50 mm Feed speed : 0-7 m/min (0,25kW) Power consumption 3,2 kW Work table height 890 mm Made in Germany 1996 y. Transport dimensions 1360x680x1220 mm Weight 150 kg
Polishing unit without spraying at the outlet and after forming of the edges. HOLZ-HER Primus 1436 SE PVC edge banding machine Range: Primus Model: 1436 SE PVC Type: automatic edge banding / banding machine Use: application and finishing of edges on wood panels Power supply: three-phase 400 V on European configurations listed Feed speed: approx. 11 m/min Maximum panel thickness: approx. 50 mm Minimum workpiece width: approx. 60 mm Edge thickness: depending on configuration, up to approx. 8–13 mm in strips and 2–3 mm in rolls Pneumatic pressure: approx. 6 bar Indicative dimensions: L 4.5–4.7 × W 1.02–1.40 × H 1.63–1.65 m Indicative weight: approx. 1,230–1,300 kg Auction-ID: A3-46142-35224
Type: edge banding machine / edge banding machine Year of Manufacture: 2005 Serial number: 05.253.242 Power supply: 400 V – three-phase – 50 Hz Power: 2.5 kW Plate Indicated Speed: 2,450 RPM Manufacturer's plate weight: 250 kg (so I would put 250 kg rather than ±200 kg) Dimensions: approx. 180 × 65 × 110 cm CE marking Manufactured: Italy Professional machine for the laying/gluing of edges on panels, especially for carpentry and cabinetmaking. Loading possible by the seller on a trailer. The seller has the necessary equipment to load the machine onto a trailer during pick-up. Auction-ID: A3-46142-35301
• Edgebander • Serial number 8667702 • Total installed power 22 KW • Edge thickness from 0,40 mm up to 3 mm • Worpiece thickness up to 50 mm • Minimum workpiece lenght 120 mm • Minimum workpiece width 120 mm • Feed motor 1,47 KW • Control • Edge magazine for one edge coil • Gluing unit with pot for granulated hot melt adhesive • Pressure group with (1+3) rollers • End trimming unit, 1 x motor 0,37 KW-12000 rpm • Profile trimming unit, 4 x motor 0,37 KW-12000 rpm • Profile scraping unit • Edge buffing unit, 2 x motor 0,37 KW-1370 rpm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-190
6-60 mm, joint cutter, multi-cutter, copy, scrapers radius/phase, Auction-ID: A1-47366-123
Joint milling, adhesive unit, pressure zone, chop saws, radius milling, radius scrapers, flat scrapers Auction-ID: A1-47366-124
• Edgebander • Edge thickness from 0,40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Adjustable feed speed: 8 m/min - 20 m/min • Control • Joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for strips and roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • Pressure group with (1+2) rollers • End trimming unit with 2 motors • HOLZ-HER 1823 fine trimming unit, 2 x motor 0,60 KW-12000 rpm • Profile scraping unit • HOLZ-HER 1983 profile trimming unit • Edge buffing unit • Milling group, motor 3,80 KW-12000 rpm • Sanding belt unit • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-84
- Strip edge thickness from 0.40 mm to 12 mm. - Thickness of the edge in roll from 0.40 mm to 3 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Variable feed rate. - IDM PC OFFICE control. - Entrance spindle moulder group. - Edge loader for slats and roll, edge tray for one roll. - Gluing unit with boiler for granulated hot melt adhesive, with prefuser. - Pressure group with (1+3) rollers. - Cross-cutting group. - Spoke profiling group. - Shape group with 2 motors. - Milling unit tiltable from 0° to 90°, 4 KW motor. - Radius scraper group. - Tail scraper group. - Group of cleaning brushes. - LEISTER hot air blower group. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-59
Used hot-melt edge banding machine (edge bander), marked \"ΠΑΝΞΥΛ\" (Panxyl) in the seller's listing. Condition: - Used machine - Has not been operated for years; needs inspection before use Auction-ID: A7-50988-156
Used automatic edge banding machine FRAVOL, Italian made, model R9 of the RAPID series. It applies PVC, ABS, melamine, veneer and solid wood edging, in strips or from the roll. A compact and sturdy machine, suitable for both industry and small workshops. The machine heats up quickly and is ready for work in 8 - 10 minutes. The pressure units are adjusted automatically, with a pressure bar with a double row of wheels. The two motors of the end trimming unit are adjustable from 0 to 15 degrees and are powered by a 200 Hz frequency converter (inverter). Technical data: Panel thickness: 10 - 60 mm Minimum panel width: 60 mm Minimum panel length: 140 mm (PVC) Edge band width: 15 - 65 mm Edge band thickness: 0.4 - 15 mm Feed rate, adjustable: 6 - 16 m/min Glue pot capacity: 3 kg Voltage: 220/380 V, 50/60 Hz, three-phase Installed power: 7.5 kW Pneumatic pressure: 6 bar Weight: 1900 kg For t ...
Used economical edge banding machine (edge bander) by Kleidara with multiple processing heads. Used for applying edge banding (melamine, PVC or wood) to panels, with gluing, cutting and trimming of the band at the panel edges. An economical option for furniture manufacturers and joinery workshops covering basic edge banding needs. Currently unchecked. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-80
- Semi-automatic machine for the application of rubber edges with a \"T\" section on panels of different shapes and dimensions without the aid of counter-templates. - Retractable cutting device. - Applicator with vibration so as not to damage the edge surface. - Heater to facilitate application operation. - Retestador. - Total installed power 6.02 KW. - Thickness of the pieces from 10 mm to 30 mm. - Feed speed 5 m/min. - Table dimensions 1050 x 800 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-52
1.000 € 
