Manufacturer:
(Category: 503)
ID3253 Doppstadt AK510 K year/Year of construction 2014 approx. 5210 hours/hours 29 t Shredder Shredder
AGICOM recycling machines: Very good, almost as good as new single-shaft shredder for old cables, wood The cutting width or rotor length is 400 mm, 30 mm indexable cutting plates are installed. The machine has a hydraulically driven gate valve equipped with pressure monitoring. The machine has only 35 hours of operation and is still coated with the original paint in the cutting room. • Year of construction 2007 • Propulsion: 9.2 kW • Hydraulic pusher: 1.5 kW • Weight of single-shaft shredder Bano MAC400: approx. 850 kg
Forrec AE-600R single-shaft shredder: Used and very powerful single-shaft shredder for a wide range of applications. Easy replacement of perforated screen, hydraulic pusher Technical data shredder Forrec AE-600R: 30 kW; 400 volts Cutting blade: 43x43 mm Rotor length: 600 mm Rotor diameter: 250 mm Dimensions: 1550x1500x2100 mm Weight shredder Forrec AE-600R: approx. 1600 kg
For sale is a processing plant for third-party take-back polystyrene - fully functional. Feeding table: 2000x2000x900 Belt conveyor: 1420x4000 Slope: 21° Transport speed: 4-16 m/min Design: (50Hz):8m/min Styrofoam mill: 2180x2496x1590 Filling opening: 1500x1000, weight 1500kg
Kleemann Impact Mill Brand: Kleemann. Type: SHB 12 Inlet opening: 1430 x 1050mm Incl.: steel construction and inlet box.
Impact mill SBM Austria Brand: SBM Austria Type: HSB 125/112 4F for hard rock Inlet opening : 1150 x 450 mm Incl.: E-Motor & Hydroliek-unit
Specifications Cutting width: 3.8×48 mm Productivity: approx. 40 sheets (A4, 70g/m²) Cutting speed:- Year of construction: 1989 Safety level: P3 Power supply: 400 V / 2.2 kW
Shredder for green waste, roots, waste wood, reed wood, organic waste, biomass, bark, etc. Equipment: Radio, hydraulic travel drive, overbelt magnet, SPECIAL FEATURE: Both shredding shafts, basket carrier with bio-cutting unit, baskets, tools, large service renewed before 100 hours of operation original Komptech.
Single-shaft shredder particularly suitable for secondary shredding, granulation of pre-shredded material. Application: Commercial waste for thermal or recyclable recycling, e.g. paper, cardboard, art and foams, rubber, leather, textiles, floor coverings. etc. Lindner Komet 2800, overhauled machine 02/2024 Year of construction 2015 Control cabinet with FÜ ABB, dustproof with dry cooler Control panel: new Drive motors : ABB 2x160 kW Paint New/RAL: 5003/7001 Rotor bearings/squeegee/shaft seals : new Wear plates: stainless steel R+L New Knife holder: new All knives/screws : new Sealing ring rotor: new Sealing ring wall: new Terminal strip top: new Terminal strip bottom: Refurbished Counter knife carriage: Recycled Scraper comb beam with sheets: new Gaskets, brackets, bolts, locking bolts: used very well preserved Adjustment screws (counter knife, scraper comb): new Slidi ...
Doppstadt DW 3060 Büffel - Year of construction 2012 - Running hours 5232 - Engine Mercedes Benz overhauled - AD Blue - Hydraulic drive (self drive) -Remote control - Overbelt magnet Machine is overhauled and immediately available
Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. incl. funnel Shipping time: immediately
TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Pre-ripper Type: VSR 1215 Version: Twin-shaft shredder / rotor shear Year of construction: 2018 Rotor diameter x length: 530 x 1,500 mm Operating hours: approx. 500 h Drive power: 2 x 90 kW Rotor speed (max.): 16 - 37 RPM Nominal torque: 33,000 Nm Number of tearing tools: 8 pcs. Width of tearing tools: 80 mm Total weight: approx. 22,000 kg SPECIFIC COMMENT - Incl. control cabinet/control - Incl. hydraulic pressure unit - Incl. steel substructure - Warranty for approx. 500 Bh - Shredding of domestic, commercial, bulky waste, waste wood, e-waste, plastics,...
TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Rotor impact mill Type: RPMX 1116 Year of construction: 2016 Drive power: 200 kW Rotor diameter x height: 1,150 x 160 mm Grain spectrum: 0 - 15 mm Grinding gap adjustment: 4 - 6 mm Number of rackets: 8 pcs. Circumferential speed: max. 90 m/s Dimensions (LxWxH): 4,600 x 2,000 x 2,800 mm Total weight: approx. 10,000 kg SPECIFIC COMMENT - Factory refurbished 2023 - Rotor wear parts completely renewed - Both outlet shafts renewed - Safety equipment renewed - Ideal for the recovery of valuable materials from metal-containing fine fractions (stainless steel and cable strands) - Without control (but can be offered)
INDUSTRIAL CONFIDENTIAL SHREDDER Type: Single-Shaft Shredding System Manufacturer: ERDWICH Model: M400/1-400 Condition: Used, very good condition, serviced. Power: 2.2kW 400v 50Hz 3Phs Screen Perforations: 12mm Description: Premium German designed and built heavy-duty, industrial, single-shaft shredder. Used for the size-reduction, destruction of confidential documents and materials, such as identification card and passports. Principle of Operation: Fully self-contained size-reduction solution, material is loaded, via the gas strut assisted door, at the top of the shredder. Material is shredded by a series of cutting tools, mounted to a rotor which passes through a static knife until small enough to pass through a perforated screen and discharged at the base of the machine. The shredder has both pneumatic pusher ram (introducing material to the rotor) and H²0 misting ...
MOCO AZ11 TWIN-SHAFT SHREDDER Manufacturer: MOCO Type: AZ11 Shaft length: 400 mm Dimensions: 2320 x 1000 x 1950 mm Weight: 1300 kg Installed power of main engine: 15 kW Shredding knives: 2 X 12 ROTATING BLADE (+ CLEANING BLADES) THE SYSTEM MOCO AZ 11, shredder with slow and low noise running hexagon working shafts. Low vibration and minimal maintenance, compact design, robust welded construction, low power consumption, individually replaceable cutting discs. THE ELECTRIC The control of the AC geared motor is equipped with an automatic overload-dependent reverse control. The machine can be inspected in our warehouse in Székesfehérvár-8000 Hungary. For further information please contact us.
Single Shaft Shredder "Obsolete" Propulsion: 37kW Hydraulics: 1.5kW Rotor diameter: approx. 400 48 rotor blades 3 stator knives Incl. segment floor
Cone crusher Krupp Brand: Krupp Type: 91-20 Year of construction: 1999 Incl.: electric motor, hydraulic system, electric control and new wear parts. Type: 90-8 Year of construction: 2000 Incl.: electric motor, hydraulic system, electric control and new wear parts.
ID2841 Wagner WS22 year/Bauahr 2010 ran only a little 3.7t Shredder, 22 KW Shredder, 22 KW
ID2850 Pallmann year/Bauahr 2001 70 t Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers
Single-shaft shredder with 2500 mm rotor width Rotor diameter 500 mm electro-hydraulic drive 250 kw with hydraulically adjustable counter knife Operational
For sale is a used ZENO shredder ZTLL 740x900 with the following features: Manufacturer: ZENO Model: ZTLL 740x900 Condition: good Dimensions set-up: 1.70 x 1.80 x 2.60 m last operation: August 2023 Previous use: EPS shredding Electrical data: Control cabinet is wired to the machine Motor power: 15kW Hydraulic ag: 0.25 kW Other: Spare perforated grille 11x17 available, separate stairs to the hopper available; Availability: immediately or by appointment
used
2 shaft shredders with a rotor width of 1500 mm Diesel engine from CAT
Universal Rotor Shears UC 1500 Power 2x55 kW Cutting unit ejection opening: (width x length) 1124 mm x 1520 mm Rotor shaft speed 1: 16 rpm Rotor shaft speed 2: 16 rpm Knife width: 70 mm Number of Knives-4 EZN Infeed Lugs Incl. hopper, pusher without hydraulic unit
Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 11 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. Shipping time: immediately
Specifications Shredder Cutting width: 7.8x55 mm Power supply: 400 V/7.5 kW the safety level 2+1 wg DIN 32757 P-3, O-2, T-2 wg DIN66399 pt. 5.2 Productivity: ok. 300-500 sheets (A4, 70g/m²) Baler Maximum pressure: 9 tons Press force: 1.94 kg/cm² Productivity:- Bale size: 770x600x500 mm Price: on request Bale weight: - Power supply: 400 V/4 kW Machine is fully functional, after technical supervision. Price also includes paint renovation.
Specifications Cutting width: 3.8×48 mm Year of construction: 1992 Productivity: approx. 40 sheets (A4, 70g/m²) Price: on request Cutting speed:- Safety level: P3 Power supply: 400 V / 2.2 kW Machine is fully functional, after technical supervision.
Specifications Cutting width: 7.5x40-80 mm mm Year of construction: 1999 Productivity: approx. 300 sheets (A4, 70g/m²) Price: on request Cutting speed: 250 mm/s Safety level: 2+1 wg DIN 32757 P-2,O-2,T-2 due to DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Press force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity:- Bale weight: - Price: on request
Shredder Cutting width: 7.8x55 mm Power supply: 400 V/7.5 kW Safety level 2+1 according to DIN 32757 P-3, O-2, T-2 wg DIN66399 pts. 5.2 Productivity: ok. 300-500 sheets (A4, 70g/m²) Baler Maximum pressure: 9 tons Press force: 1.94 kg/cm² Productivity:- Bale size: 770x600x500 mm Price: on request Bale weight: - Power supply: 400 V/4 kW
Bosch Baumaschinen GmbH
