377 shredders used for sale

Impact mill Kleemann (for sand) Brand: Kleemann Type: 825 Inlet opening: 790 x 140 mm Incl: electric motor 160 kW

The shredder breaks large bulky parts made of polystyrene and EPS and similar substances with a maximum raw density of 30kg/m³ into small pieces. The shredder reduces the volume by about 65%. Thus, machine is ideally suited for use in industrial and craft companies as well as for the wholesale and retail trade with packaging material made of Styrofoam. Throughput: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Screen 50 mm: approx. 23 m³/h Depending on the sieve set, a volume reduction of 3 : 1 takes place just by shredding your polystyrene residues. Custom-made products are available on request. VAT will be shown separately on the invoice. Shipping Germany-wide included, islands with surcharge. If you have any questions, please do not hesitate to contact us.

Impact Mill Voestalpine Brand: voestalpine Inlet opening: 900 x 680 mm. Drive: 55 kW electric motor.

Kleemann Impact Mill Brand: Kleemann. Type: SHB 14-1000 Inlet opening: 1430 x 1050mm Dim. Rotor: 1400 x 1000mm Incl.: electric motor 160 kW

Kleemann Impact Mill Brand: Kleemann. Inlet opening: 1430 x 900mm Dim. Rotor: 1400 x 1000mm Incl.: electric motor 160 kW

Hazemag Impact Mill AP 4 complete with drive, spare rotor + spare parts. Capacity: approx. 150 T/h. Power requirement: 35 to 80 kW. Mouth width : 700 x 1000 mm. Weight: approx. 11000 kg

Catalog number 6726 TECHNICAL DATA - 280x300mm loading hopper inlet - outlet for shredded wood fi 310mm - rotor working width 340mm - 22kW main engine - number of knives 6 pcs - dimensions length / width / height 1300x1150x1680mm - weight 720 kg ADVANTAGES - very good condition - used chipper Net price: PLN 19900 Net price: EUR 4422 Net price, calculated at the rate of 4.50 PLN / EUR (with greater fluctuations in the rate, the price may change)

CATALOG NUMBER 6631 TECHNICAL DATA - 285x305mm loading hopper inlet - 7.35kW engine - number of knives 3pcs + 2 counter knives - knife size 300x75mm - sieve (2 types) 10mm, 8mm - diameter of the extraction nozzle 100mm - dimensions length / width / height 1070x900x1980mm - weight 613 kg ADVANTAGES - Swedish production - additional sieve - very good condition - used chipper Net price: PLN 22900 Net price: EUR 5089 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)

Wood shredders, plastic shredders, garbage shredders, two-shaft shredders, shredders, shredders used Manufacturer: I.S.V.E. Srl Type: 80-80 D Year of construction: 2003 Insertion approx. 1500 x 900 mm Insertion height approx. 1600 mm Drive 2x 9 kW 380 V Dimensions: approx. 2400 x 1800 x 2400 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Tank scissor dentition, scrap scissor bit attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE for MS22 Overall dimensions: 1400 x 1300 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Scrap shear dentition attachment for an excavator unused MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS15-MC Year: 2020 Overall dimensions: 1100 x 1000 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

Scrap shear dentition attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS22-MC Year: 2020 suitable for multipunch MS22R Overall dimensions: 1100 x 1100 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved

The MR 40-80 is a powerful single-shaft shredder for many tasks, such as the pre-shredding of cables, the crushing of electronic waste, used plastics, wood, etc. Unlike other single-shaft machines, IRS's shredder has two instead of one series of stator knives for better product quality and higher hourly output. The optimized arrangement of the rotor blades also reduces energy consumption. The horizontally acting hydraulic pusher has replaceable wear strips and regulates the contact pressure on the rotor. In addition, there are interchangeable screens for special tasks from 10 mm hole diameter. On request, the shredder can be optimized for cooling the rotor shaft, with wear protection armor, hydraulic clutch, remote services and other options for the respective application. Specifications: Number of knives: 35 + 2 (rotor + stator) Rotor speed: 85 rpm Rotor Ø, length: 400 mm, 80 ...

Specifications Cutting width: 3.8x50 mm Power supply: 400 V Year of construction: 1991 Price: on request the security level: P2

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without solid stuttering materials. Application: Crushing of industrial and commercial materials, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and recyclable recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2x 160 kW (Schorch motors) Sieve perforation: Sieving 148 mm Control cabinet: complete with ( FUe -P-Drive) Opening: 3190 x 1750 mm Single volume: approx. 8 m3 Rotor length: 3190 mm Rotor flight circle: 745 mm Rotor speed: 50Hz : 58 rpm Number of rotor blades: 36 pieces Knife dimension, pointed knife: 145x 145 x 47 mm Geggenmesser unten: 9 pieces Scraper comb above: 9 pieces Hydraulic feed: 11 kW Weight: approx. 38 t Dimensions LxWxH mm: 6250 x 3260 x 3090(H=4900 m ...

Specifications Cutting width: 7.5x40-80 mm Year of construction: 1999 Productivity: approx. 300 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 250 mm/s the safety step: 2+1 wg DIN 32757 P-1,O-1,T-2 wg. DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Pressing force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity: - Bale weight: - Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Shredder Cutting width: 5.8 x 40 mm Year of construction: 1992 Power supply: 400 V / 7.5 kW the safety level P4 DIN 66399-1 F2 DIN 66399-1 pts. 5.2 Baler Maximum pressure: 9 tons Year of construction: 1992 Pressing force: 36 tons/m² Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power supply: 400 V/ 3.5 kW Bale binding: manual

Specifications Cutting width: 3.8×48 mm Year of construction: 1993 Productivity: approx. 40 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: - the safety step: P3 Power supply: 400 V / 2.2 kW We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Cutting width: 12mm, 9mm, 6mm, 3mm Year of construction: 1988-1989 Productivity: approx. 70 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 200 mm/s the security level: P1 - P2 Power supply: 380 V/2.2 kW Machine is fully functional, after technical inspection We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Industrial shredders IDEAL 4104 Shredder Cutting width: 6 mm Power supply: 400 V/ 4 kW the safety step P2 DIN66399-1 Year of construction: 1993 Productivity: ok. 70 sheets (DIN A4, 70g/m²) Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Cutting width: 3.8 x 50 mm Year of construction: 1997 Power supply: 400 V/ 4 kW Price: on request the safety step: DIN 66399 O-2/P-3/T-3/E-2/

Cutting width: 5.8 mm Year of construction: 1993 Productivity: approx. 100 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 354 mm/s the safety standard DIN 66399: P2 Power supply: 400 V / 4 kW Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Cutting width: 5.8 x 50 mm Year of construction: 2003 Productivity: approx. 120 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s the security level: 3 Power supply: 400 V/4 kW

Headquarters. Edge stiffener extraction

used roll splitting machine Manufacturer: BOA (MBM) Type: RSM Year of construction: 1990 specifications: Roll width max.: approx. 1,800 mm Roll diameter max.: approx. 500 mm Drive power: 3 kW Drive via an electric motor with spindle with task table

Edge strip shredder for edge trimming plastic films.

Styrofoam shredder MAXI XL 1400 x 560mm MAXI 1400 x 600mm JUMBO 1800 x 800mm Insertion opening: L x W Polystyrene shredder MAXI XL: 1400mm x 560mm Polystyrene shredder MAXI: 1400mm x 600mm Polystyrene shredder JUMBO : 800mm x 800mm Dimensions: L x W x H (dimensions without blower) Polystyrene shredder MAXI XL: 2.4m x 0.9m x 1.6m Polystyrene shredder MAXI: 1.9m x 0.8m x 1.8m Polystyrene shredder JUMBO: 2.4m x 1.1m x 1.8m Motor power/connection/power conveying fan: Pre-shredder / conveyor blower Polystyrene shredder MAXI XL: 5.5 kW | Blower 2.2 kW Polystyrene shredder MAXI: 6.2 kW (with built-in screw under the pre-crusher) | Blower 2.2 kW Polystyrene shredder JUMBO 11.2 kW (with built-in screw under the pre-crusher) Conveyor blower 5.5 kW Throughput (EPS) Polystyrene shredder MAXI XL: 8-10 m3/h Polystyrene shredder MAXI: 25-30 m3/h Styrofoam  ...

JMC 900 alligator shears (new machine) The JMC 900 has a hydraulic hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Out of stock Delivery time: On request Manufacturer: Mc Intyre Knife length: 920 mm Measuring opening: 473 mm Cutting capacity: 233 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 aperture: 26 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 3200 x 1030 x 1800 mm Weight: 4400 kg Drive: 18.5 kw / 400 V + 1.5 kw electric motor cooler Operation: Foot pedal

Alligator scissors Lindemann Alibo The Lindemann Alibo has a mechanical hold-down. The scissor head is protected with a safety basket. Machine On hand Knife length : 760 mm Weight : 4200 kg Mouth width at the tip : 200 mm Cutting capacity: 0.45 kN/ mm² : Ø 70 mm Number of strokes : 20 – 40 cuts/min Dimensions: 4.20 x 1.50 x 1.80 meters Drive: 15 kw Hold-down: Mechanical