Manufacturer:
(Category: 503)
SINGLE SHAFT SHREDDER 37 kw, sturdy structure in electro-welded steel, cutting chamber dimensions mm. 700x1250, electro-welded sheet metal hopper for top loading, installed power on the rotor 37 kw (50 HP), hydraulic unit power 4 kw (5,4 HP), transmission by belts, 1 rotor, rotor diameter 400 mm., rotor length 700 mm., ram stroke 800 mm., 44 reversible tools, 4 usable tool sides, 3 upper fixed blades, 3 lower fixed blades, 73 average rotor revolutions/min., weight 4460 kg, production 800-1200 kg/h depending on material and screen size, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 500 mm of useful stroke, transmission system by means of pulleys and belts, electrical panel according to EEC standards with inverter, SIEMENS main internal board, Power: 37 kw ...
Part Number: 7687 SPECIFICATIONS - inlet width 540mm - inlet height 300mm - shaft width 630mm - shaft diameter 700mm - knife length 630mm - number of knives 2pcs - sieve dimensions 40x40mm - toothed pulling shaft at the bottom - lower shaft motor 4kW - toothed pulling shaft from above - upper shaft motor 4kW - belt feeder - length of the feeding belt 4720mm - width of the feeding belt 500mm - main motor 75kW - Autoewers (adjustable) - total dimensions of the machine length/width/height 3100x2000x1830mm - total dimensions of the feeder length/width/height 4800x780x980mm - weight about 5000kg ADVANTAGES – made in Germany – autorewers – used chipper, very good condition Net price: 120900 PLN Net price: 28447 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)
Part Number: 7686 SPECIFICATIONS - inlet width 340mm - inlet height 120mm - shaft width 345mm - number of knives 2pcs -sieve - toothed pulling shaft from above and below - shaft motor about 2×1.1kW - electric autorewers (adjustable) - with conveyor belt - length of the feeding belt 3850mm - width of the feeding belt 340mm - Belt feed front/back - main motor 22kW - extraction spigot diameter 220mm - dimensions length/width/height 5300x1500x1500mm - weight about 1500kg ADVANTAGES – made in Germany – with a belt feeder – autorewers – used chipper, very good condition Net price: 43900 PLN Net price: 10329 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)
Part Number 7685 SPECIFICATIONS - inlet width 440mm - inlet height 300mm - shaft width 480mm - shaft diameter 440mm - number of knives 2pcs - sieve size 50x50mm - toothed pulling shaft from above and below - shaft motor 0.78/1.1kW - electric autorewers (adjustable) - with conveyor belt - length of the infeed belt 4006mm - width of the feeding belt 380mm - Belt feed front/back - main motor 30kW - dimensions length/width/height 6100x1100x1100mm - weight about 2000kg ADVANTAGES – made in Germany – with a belt feeder – autorewers – used chipper, very good condition Net price: 76900 PLN Net price: 18094 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)
HERBOLD granulator Type SM S45/60 Heavy-duty series Inlet opening 600 x 680 mm Drive motor 75 kW
- With hydraulic pusher - Year: 2004 - Engine: 75 hp (55 kW) - Hopper dimensions: 1118 x 1990 mm - Cutting chamber: 1200 x 370 mm -Rotor: Orbit diameter: 370 mm Cutting speed: 1500 rpm Num. blades: 26 -52 (variable depending on the material to be treated) - With 3 sets of grille: Ø20, Ø30,Ø35 mm - Spare gearbox - Extra hopper 3000 x 2200 x 1600 (height) mm
used barrier scrap shears Manufacturer: Schlüter Type: BS 1 Year of Make: 1973 specifications: Performance with a material strength of 40 kp/mm²: Round bar: up to 40 mm Square bar: up to 35 mm Sheets: up to 15 mm Pipes up to 6 mm wall thickness: 300 mm Railway sleepers: all normal grades Angle iron: 100 x 100 x 10 mm Knife Dimensions: Knife length: 600 mm Knife opening front: 310 mm Knife opening rear: 140 mm Cutting rate: 30/min. Drive power: 7.5 hp / 5.5 kW Dimensions: Length: approx. 4,000 mm Width: approx. 1,400 mm Height: approx. 2,000 mm Weight: approx. 3,600 kg Description of the machine: Due to the extremely large blade opening, it is particularly suitable for light, bulky scrap. It is designed in a mobile version with drawbar and has a shear coupling as extensive protection against overloading. High ...
Specifications Cutting width: 3.8 x 50 mm Year of Make: 1995 Power connection: 400 V/ 4 kW Price: on request Cutting speed: 354 mm/s Safety level: DIN 66399 O-2/P-3/T-3/E-2/ Cutting Type: Particle Cut Working width: 428 mm
Specifications Cutting width: 3.8 x 40mm Productivity (80g/m²): 65-75 Power connection: 400 V / 2.2 kW Year of Make: 1993 the safety level DIN 66399: P-4 / O-3 / T-4 / F-1 / E-3
The machine is in very good condition Year of construction 2008 Max. Duty 40mm Capacity: approx. 10-50 to./h Weight is 6.3 tons Dimensions: 3.5 x 2.02 x 2.21m
4-SHAFT SHREDDER 22 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 11 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.
4-SHAFT SHREDDER 15 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 7,5 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.
DUAL SHAFT SHREDDER, n.2x 1.300 mm. long shaft, n.2 x 37 kw motors, control panel, sturdy steel structure, good working conditions, installed power Kw: 74
Overhauled machine, single-shaft shredder LINDNER JUPITER 2200 It is made for the single-stage processing of untreated municipal, industrial and commercial waste into medium-calorific substitute fuels (40 – 120 mm) – the ideal raw material for thermal utilisation in the cement plant's calciner. Lindner Jupiter 2200 Rotor equipped with flat blades. Year of construction 2015 Control cabinet with FU ABB Control panel Drive motors : ABB 2x132 kW Funnel Hydraulic Discharge belt Total weight approx. 32 t Shipping time: immediately
Shredder UNTHA RS-100 Main shaft speed: 17.3 rpm Auxiliary shaft speed: 28.0 rpm Chopping discs width: 38 mm Drive power 2x55 kW 400 V, 50 Hz Screen perforation round: Ø 25 mm and 80 mm Total weight without base: approx. 12,000 kg Control cabinet with wiring : complete Incl. funnel + pusher and base frame clean machine, checked, always maintained, 1 owner !
The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient blade length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, pipelines, motors, cables or gearbox housings. The shears are also often used for cleaning scrap metal or cutting vehicle radiators. The machine has a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. Using the foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted using simple clamping screws. The scissors are from our demonstration pool and can of course be viewed or tested. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info
engine: diesel engine Cummins B6.7 - Stage 5 (AdBlue) power: approx. 209 kW / 280 hp shafts with 7/7 discs with 5 knives per discs & breaker bar with combs Mobile Hook Lift Frame wheel axle with drawbar hydraulic height adjustment for magnet hydraulic height adjustment for discharge belt water sprinkling system Monitoring Industry 4.0 weight: approx. 20 t
Used shredder for the pre-shredding of old cables and other materials. Cutting unit with knife blocks instead of cutting crowns. Two stator knives arranged opposite each other for higher hourly output. Easy-to-reach maintenance areas. Drive with 2 electric motors with 7.5 kW, 400 V each and a reduction gear arranged directly on the rotor axis. Hydraulic slide valve with load control. Rotor reverses in case of overload. A gearbox replaced. Perforated sieve 25 mm. Additional set of rotor blades. Output approx. 200 kg of cable per hour. The machine can be viewed and tested with us. Write to us. infRecyclinganlagen.info.
The robust single-shaft shredder is equipped with 7 offset 40/40 mm indexable blades on the rotor The extremely robust design allows the shredding of data carriers such as hard drives, etc., files with metal components, wood-metal mixed material, metal-plastic material, recycling material, textile and carpet, rubber waste, horse manure, etc., sheep's wool, compost, etc. Technical data: 1 rotor with 7 offset indexable blades 40/40 mm 1 profiled counter blade 1 interchangeable screen perforation 20 mm round (can be adapted as required) Feed width 366 mm Rotor diameter 330 mm Motor 7.5 kW, 3x380 V, 50 Hz (can be made stronger) Speed approx. 580 rpm (a gearbox can be set up for low speeds) Machine new Information from Peter Ari Schär from MATEC Changes, errors, prior sale reserved ! Manufacturer: MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse ...
Specifications Cutting width: 4.5 x 40-80 mm Year of Make: 1994 Power connection: 400 V / 7.5 kW Price: on request the safety level DIN 66399: P3 DIN 66399-1 Machine is fully functional after technical supervision. The PREMIUM paint renovation - 470 EUR additional payment If you have any questions, please call us: +48 696 072 985
Crushing system force: 120 t, Open box dimensions: 5000x2400 mm, Engine: Scania, Type: diesel, Year of construction: 2001
fire: MIZAR, model: CU 120, Year of construction: 2019, Drive Electro: 125 kW, Blade: 60+4, Length: 5.500 mm, Width: 2.000 mm, Height: 3.500 mm, Weight: 7.000 kg, Capacity: 1,000-1,500 kg/h
Technical specification, Will be added soon, Overband magnetic separator, Magnetic blocks are designed to effectively remove unwanted metals such as iron and steel prior to the granulation process. They attract and remove metal particles as the materials pass underneath, maintaining product purity and protecting machinery from ferrous residue. Mizars OMS series magnetic separators offer durability and high performance in continuous operation, providing a reliable solution for industry.
- Brand: Silmisa - Model: MSA300-1260 (750)2. - With hydraulic pusher - Working width: 1260 mm - Engine: 75 hp (55 kw) - Year: 2007 - With electrical panel
SPECIFICATIONS: Installed power: 18.5 kW Inlet width: 300 mm Inlet height: 200 mm Rotor: Ø 252 mm Intake manifold: Ø 200 mm For the shredding of the following wood waste: - MDF strips - Pressed chipboard -Plywood -Cardboard EQUIPMENT: Motorized carpet: 11000 x 330 mm
Engine: diesel engine Cummins F3.8 - Stage 5 Power: approx. 114 kW / 154 hp Shafts: 7/7 discs with 8 knives per discs & breaker bar with combs Version: track system with hopper with vibro chute Permanent - OVERBAND Magnet remote control Weight: approx. 11 t
With a 780 X 420 cutting chamber with stepped closing rotor, with a 75 hp (55.12 Kw) water-cooled motor. Hopper and hydraulic grill opening. Without electrical panel.
Hump Shredder PHSS 40/110 Specifications: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of Make: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: fast-running shredder shaft with counter comb Remark: The machine is in working condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Viewings are possible at any time by arrangement. We are also happy to carry out tests with your material on request for an expense allowance. We will also be happy to answer any questions you may have about the machine by phone from Monday to Thursday from 08.00 to 14.00 h. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The ...
Shredder with external feed, metal separator, etc. very good condition, many spare parts, immediately ready for use!
Mercodor twin-shaft shredder with a cutting space of 1200x600 mm, knife loading, optionally e.g. 40 mm, 3 hooks or 20 mm, 25 hooks... Solid housing welded design with appropriate bearing and sealing to the cutting chamber.
GERMANPLAST SRL
