Cutting unit consisting of: 7 rotating blades and 8 fixed counter blades. Incl. hydraulic presser Technical data: Throughput: Depending on the material and hole screen Power consumption: 17 kW Dimensions: (L x W x H) 154 x 115 x 170 cm Hopper: 1,180 x 1,120 mm Weight: approx. 1.200 kg Hole screens: 2 pieces (10 mm and 15 mm) Application for: Materials such as copper, aluminum cable, non-ferrous metals, rubber, plastics, wood, and composites
The MR 40-80 is a powerful single-shaft shredder for many tasks, such as the pre-shredding of cables, the crushing of electronic waste, used plastics, wood, etc. Unlike other single-shaft machines, IRS's shredder has two instead of one series of stator knives for better product quality and higher hourly output. The optimized arrangement of the rotor blades also reduces energy consumption. The horizontally acting hydraulic pusher has replaceable wear strips and regulates the contact pressure on the rotor. In addition, there are interchangeable screens for special tasks from 10 mm hole diameter. On request, the shredder can be optimized for cooling the rotor shaft, with wear protection armor, hydraulic clutch, remote services and other options for the respective application. Specifications: Number of knives: 35 + 2 (rotor + stator) Rotor speed: 85 rpm Rotor Ø, length: 400 mm, 80 ...
Small but powerful preshredder for old cables, plastics, wood, etc. The offered shredder was used for about 1 year for the shredding of old cables., The hourly output is, depending on the desired particle size (sieve insert) at about 120 to 200 kg. Rotor, knife etc. are in good condition. The machine is ready for use and is checked again before delivery.
SHREDDER type Haas TYRON 2500 E ready for use incl. base frame and discharge conveyor JUST ARRIVED AT OUR WAREHOUSE
Mutton NZS 700 D Diesel engine 5327 hours Good condition Incl. magnet Metal detector
2-shaft shredder for wood, roots, green waste, roofing felt and other. difficult materials Production of defined grain size possible through exchangeable screen baskets (80 - 150 mm) Hydraulic drive 2 x 160 KW, drive unit with electric drive in own 20 " container Shafts, bearings, etc. recently overhauled, replacement shafts available for processing
Completely overhauled machine in January 2022, Slow-running robust single-shaft shredder Suitable for the (pre-)shredding of various materials (without solid stoer substances). Application: Crushing of industrial and commercial materials, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and recyclable recycling, loose or pressed into bales. Rotor bearing/bearing housing: New Storage: New Scraper comb bar: New Rotor armor: New Rotor blade: 24 stucco (new) Crowns: 145x145x47 mm Wear parts/wiper comb: New Cover Bars Wiper Comb: New Counter knife slide: New Counter knife/clamping parts : New Clamping part counter knife: New Scraper Comb: New Clamping parts -Wiper comb: new Insert screws, scraper comb, rotor, counter knife: New Motors: 1x110 kW, NEW Hydraulic power unit incl. Line : complet ...
Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without solid stuttering materials. Application: Crushing of industrial and commercial materials, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and recyclable recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2x 160 kW (Schorch motors) Sieve perforation: Sieving 148 mm Control cabinet: complete with ( FUe -P-Drive) Opening: 3190 x 1750 mm Single volume: approx. 8 m3 Rotor length: 3190 mm Rotor flight circle: 745 mm Rotor speed: 50Hz : 58 rpm Number of rotor blades: 36 pieces Knife dimension, pointed knife: 145x 145 x 47 mm Geggenmesser unten: 9 pieces Scraper comb above: 9 pieces Hydraulic feed: 11 kW Weight: approx. 38 t Dimensions LxWxH mm: 6250 x 3260 x 3090(H=4900 m ...
Weight: 1050 kg Dimensions: 2451x1337x2230 mm Cutting unit opening: 800x1300 mm Throughput: up to 80 pallets per hour highly material-dependent Motor: 5.5 kW Ideal for pre-breaking voluminous materials such as pallets, fruit boxes, polystyrene. For the production of wood chips, the pre-crusher can also be installed directly above a single-shaft shredder. Requirements for the raw material: - Moisture content less than 35 % ATRO - Do not enter solid wood. - The machine must be installed in accordance with the CE guidelines or secured on site against intervention from below (in the cutting unit). - Pallets up to a size of 1200x800 mm can be processed.
Pre-shredder/ shredder/ chopper Fabr. Piranha for wood and plastic Engine 37 Kw Shaft length 600 mm with 3 x 5 schneider knives with sieve 35 mm with control
Polystyrene shredders for EPS waste and other materials made of polystyrene – EPS specifications: Electric motor: 5.5 Kw/380 V Speed: 120 rpm. Weight: approx. 1800 kg Dimensions: 2030x1100x1550 mm Throughput: up to approx. 25 m³/hour Insertion opening: 1500×600 mm Granule size: up to approx. 50 mm Throughput depends on the material and size of the sieve. PLANTS and SYSTEMS for SHREDDING EPS WASTE (no longer usable polystyrene expands, polystyrene) – STYRO-CUT® EPS is a hard plastic material. It is mass-reduced and has good mechanical properties. In the EPS block of 1 m³ volume, there is about 98% air in 3-6 million closed cells, which is why EPS works as a remarkable heat insulator. The plant was developed for the processing of smaller quantities of polystyrene, as well as systems for the mass processing of EPS waste. Such granules can be used: in n ...
Hopper opening: 3,000 x 2,000 mm rotors: 2 Pcs. Rotor flight circle: each Ø 590 mm cutting tools: 13 pieces cutting plates 120 x 120 mm on tool holders bearing: pedestal drive: 2 x 90 kW machine weight: approx. 24,000 kg facilities: incl. hydraulic screen door latch / interfering substance removal
