Shredder for waste wood and biomass, 2-stage ( stage 1 = Doppstadt DW 3060 buffalo ---- level 2 = AK 630 ), 2 large magnets INCLUDED, air classifier on the discharge belt included. Completely ready for use. Engine (Volvo approx. 700 hp / 515 KW
ID3749 Doppstadt Inventhor 9 year/Baujahr 2019 approx. 4.180 hours/hours 32 t Pre-shredder, roller length 3,000 mm Pre-shredder, roller length 3,000 mm
Basic equipment: Central axle trailer chassis for 80 km/h Brake system with ABS according to EC directive 50 mm EC towing eye, clip-on shoe Tyres 285/65 R 22.5 Permissible total weight 19,000 kg Mercedes-Benz OM 460 LA engine, 375 KW at 2,000 rpm. Euro Mot III B emission standard Load-dependent control of the material feed incl. automatic scraper floor reversing Fuel tank 600 liters Radio remote control complete hydraulic drive hydraulic support legs Separate drive feed roller/scraper floor "TwinDrive" Paintwork RAL 2011 deep orange Condition of the machine The machine is in a technically and visually good condition and ready for use. New diesel engine at 10,310 hours! Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects This is not a binding offer. Subject to prior sale and technical ...
Doppstadt DW 3060 D Single-shaft pre-shredder Equipment: MTU R 1100 EUROMOT IV diesel engine, 320 KW Total weight: approx. 25,000 KG 18-channel radio remote control Rear hinge 5.5 m, hydraulically foldable Comb extension Humidification device 21 roll teeth Form C DoppLock quick-change system 20 comb teeth trapezoid Overbelt magnet Hopper Elevation Service Details The machine is in very good technical and visual condition The machine receives a brand-new planetary gearbox before delivery Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects We reserve the right to sell in advance, make changes and repairs.
Offer 25153 Specifications: - Load capacity 12.5 t - Truss length 2900 mm - Truss height 350 mm - Truss beam consisting of 2 x UNP 200 - 2 x sling chains with ring + shekel L 1400 mm - Anchor points with spacing 1400 mm - left + right 4 pcs double load handling hooks each - Distance between the mounting hooks 300 mm each - Space requirement approx. L 2900 x H 350 x D 500 mm - Net weight approx. 500 kg
Builder: DOPPSTADT Model: AK 550 MEGA Engine: MERCEDES BENZ 317 kW (425 HP) Data: L. 9.200 mm x W. 2.500 mm x H. 2.950 mm (NO DISCHARGE BELT) Year: 1994 Hourly Production: 140 m³/h Shredding System: 36 HAMMER Fuel Tank: 300 L Weight: 21.000 kg
ID3259 Doppstadt DW2560 BK Bison year/Year of construction 2003 approx. 8130 hours/hours 28 t Wood shredder, screening system new approx. 1200 hours ago, gearbox overhauled and shaft replaced approx. 1200 hours ago Wood shredder, screening plant new approx. 1200 hours ago, gearbox overhauled and shaft renewed approx. 1200 hours ago
ID3253 Doppstadt AK510 K year/Year of construction 2014 approx. 5210 hours/hours 29 t Shredder Shredder
Doppstadt DW 3060 Büffel - Year of construction 2012 - Running hours 5232 - Engine Mercedes Benz overhauled - AD Blue - Hydraulic drive (self drive) -Remote control - Overbelt magnet Machine is overhauled and immediately available
TECHNICAL SPECIFICATIONS Manufacturer: DOPPSTADT Designation: Solids separator Design: Semi-mobile, hook lift system Type: GT 130 A Year of construction: 2019 Release medium: water Adjustable incline: up to max. 23° Drive type: Hydraulic Weight: 9,000 kg Transport dimensions (length/width/height): 7,346 x 2,500 x 2,921 mm SPECIFIC COMMENT - Machine for separating mixtures of materials made of buoyant and non-buoyant materials by means of water - Low operating hours - Robust and low-wear design of the machine - Compact transport dimensions as well as easy transport by hook lift truck
Screening drums suitable for all common screening machines such as Doppstadt SM 314 / SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - smallest webs - welded-in spiral - in various material thicknesses - Perforated plates sharp-edged in the highest quality - Perforated plates made of special steel We deliver our drums free of charge. Many models in stock without waiting.
Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available
Doppstadt DW 3060 Biopower Type F - Built in 2017 - Hours 6118 - Engine MTU 490 hp - AD BLUE - Weight 25,000 kg - 42 teeth -Remote control - Humidification system - Rear conveyor 5.5m - Overbelt magnet Machine is overhauled and immediately available
Doppstadt DW 3060K Biopower Type F - Year of construction 11/2017 - Hours 4839 - Engine MTU 490 hp - AD BLUE - Track chassis - Weight 30,000 kg -Remote control - Humidification system - Tail conveyor 7m - Overbelt magnet Machine is overhauled and immediately available
USED TROMMEL FOR DOPPSTADT, KOMPTECH, TERRA SELECT AND SEKO IN READY DELIVERY: FOR T4 / T40: 15 mm SQUARE HOLE 6 mm THICKNESS (NEW and USED) 25 mm SQUARE HOLE 8 mm THICKNESS (NEW and USED) 30 mm SQUARE HOLE 8 mm THICKNESS (NEW) 35 mm SQUARE HOLE 8 mm THICKNESS (NEW) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW) 50 mm SQUARE HOLE 8 mm THICKNESS (NEW) 80 mm CIRCLE HOLE 8 mm THICKNESS (NEW) 130 mm CIRCLE HOLE 8 mm THICKNESS (NEW) FOR T45/ T50: 10 mm SQUARE HOLE 6 mm THICKNESS (USED) 15 mm SQUARE HOLE 6 mm THICKNESS (NEW) 20 mm SQUARE HOLE 6 mm THICKNESS (NEW) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW and USED) FOR SM 518 DOPPSTADT: 10 mm SQUARE HOLE 6 mm THICKNESS (NEW) 15 mm SQUARE HOLE 6 mm THICKNESS (NEW) 20 mm SQUARE HOLE 6 mm THICKNESS (USED) 25 mm SQUARE HOLE 6 mm THICKNESS (NEW) 30 mm SQUARE HOLE 8 mm THICKNESS (NEW) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW) 50 m ...
Air nozzle 110 mm with flexible hose 80 mm, total length approx. 890 mm, shaft-mounted holder for 20 mm pipe
operating hours: 1900 h, Location: Germany, screen: 15 mm and 100 mm
