used Shredders for sale

Rotor Diameter: 2000 mm

used shredder Manufacturer: BOA Type: ALLIGATOR 550 - 100 Year of construction 2017 Specifications: Drive power: 55 kW Throughput: - 1,5 t/h for fine adjustment, and - up to 6.0 t/h with coarse setting Filler opening: 1,120 Rotor speed: 1,500 rpm Operating voltage: 400 V/50 Hz Insulation class: IP 55 Weight: approx. 5,200 kg

Catalog No. 6827 TECHNICAL DATA - inlet of the loading hopper 800x1050mm - working width of the rotor 795mm - main engine 11kW - pump motor 1.1 kW - number of knives 17 pcs - knife size 30x30mm - 16mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 2160x1400x1780mm - weight 1480 kg ADVANTAGES – autoreverse – pressure drawer - very good condition – used chipper - BIBER WEIMA GROSS Net price: PLN 54900 Net price: 11806 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Catalog No. 6825 TECHNICAL DATA - dimension of the loading hopper length/width 900x630mm - working width of the rotor 540mm - 7.5 kW motor - sieve diameter 20mm - knife size 40x40mm - number of knives 15 pcs - autoreverse - pressure drawer - dimensions length/width/height 2060x980x1580mm - weight 1008 kg ADVANTAGES – German production – unpainted - very good condition – used chipper Net price: PLN 37900 Net price: 8151 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Doppstadt AK 435 Profi - Year of construction 2012 - Engine Mercedes Benz 435hp - AD BLUE - Remote control - Separate drive of feed roller and scratching floor (twin drive) - Load-dependent control of the material feed incl. automatic scratch floor reversal - hydraulic drive (self drive) - Screen basket Machine is overhauled and immediately available

Low-speed pre-shredder approx. 12 000 operating hours Rotor Length: 3,000mm Rotor diameter 600 mm Knife flight circle 800 mm 21 teeth on the rotor The motor brushes have been overhauled Hydraulically foldable side combs Discharge conveyor Overbelt magnet Very robust machine, weight approx. 34,000kg Dimensions: length 7,700mm, width 3,068mm, height with feet 4,190mm DC motor 380 kW with maintenance history overhauled engine with warranty The machine is overhauled in our workshop.

Doppstadt DW 3060 Biopower Type D - Year of construction 02/2015 - Operating hours 7813 - Engine Mercedes Benz 490 hp - AD BLUE - Hydraulic drive (self drive) - Weight 25.000 Kg - Remote control - Humidification system - Rear band 5.5m - Overbelt magnet - Central lubrication Machine is overhauled and immediately available

Diesel engine: 510 HP Rear discharge conveyor with overbelt magnet Remote control

Specifications Cutting width: 3.8×48 mm Year of construction: 1993 Productivity: approx. 40 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: - the safety step: P3 Power supply: 400 V / 2.2 kW We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Wood crusher Forus, type HB 181, on roll-off container chassis, built in 2009, including overband magnet and radio remote control Specifications Manufacturer: Forus GmbH Type: HB 181 Year of construction: 2009 Hours: 625 Engine: Caterpillar C6.6 Power: 129 kW Funnel opening: 4700 x 2350 mm Number of waves: 2 Diameter shafts: 450 x 1700 mm Strap: Scalloped edge rubber strap Belt height: 3300 mm Throughput rates Waste wood: max. 25 t/h Household waste: max. 25 t/h Biomass: max. 50 t/h Dimensions: 7300 x 2350 x 2500 mm (LxWxH) Weight approx. 13,500 kg The wood crusher is a slow-running pre-shredder. It has 2 shafts and is suitable for pre-shredding waste wood, green waste, bulky waste, etc. The teeth are as good as new. Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any er ...

Builder: GREEN TECHNIK Model: BS 750 PTO Engine: 66 kW (90 HP) Data: L. 5.700 mm x W. 1.920 mm x H. 2.900 mm Year: 2003 Hourly Production: 25 m³/h Shredding System: 64 HAMMER

SHREDDER Hammel 750 E 2 x 110 kW approx. 6500 hours The machine is tested and overhauled in our workshop.

Engine: Diesel engine CAT C9 Power: approx. 261 kW / 350 PS - Waves with 7/7 writing with 5 knives per write (regenerated) - Refractive beam with comb (regenerated) - Chain drive - Discharge belt with discharge height of approx. 3,400 mm - Permanent - Belt magnet with hydraulic height adjustment -Remote control Weight: approx. 24 t regenerated according to HAMMEL standard

Impact mill Hazemag Type: APP 1214 Inlet opening : 1400 x 950 mm Drive: 190 kW electric motor

Ready for operation with 2 sets of new impact strips

With gebr. Switchboard

Two-shaft shredder Drive 37.50 kW

Inlet: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm

Specifications Cutting width: 3.8x50 mm Power supply: 400 V Year of construction: 1991 Price: on request the security level: P2

Cutting width: 5.8 mm Year of construction: 1993 Productivity: approx. 100 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 354 mm/s the safety standard DIN 66399: P2 Power supply: 400 V / 4 kW Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Cutting width: 3.8 x 50 mm Year of construction: 1997 Power supply: 400 V/ 4 kW Price: on request the safety step: DIN 66399 O-2/P-3/T-3/E-2/

Specifications Cutting width: 5.8 x 50 mm Year of construction: 2003 Productivity: approx. 120 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s the security level: 3 Power supply: 400 V/4 kW

Specifications Cutting width: 7,5x40-80mm Year of construction: 2009 Productivity: approx. 200-220 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 250mm/s Power supply: 400 V / 6.0 kW Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Cutting width: 7.5x40-80 mm Year of construction: 1999 Productivity: approx. 300 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 250 mm/s the safety step: 2+1 wg DIN 32757 P-1,O-1,T-2 wg. DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Pressing force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity: - Bale weight: - Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Shredder Cutting width: 5.8 x 40 mm Year of construction: 1992 Power supply: 400 V / 7.5 kW the safety level P4 DIN 66399-1 F2 DIN 66399-1 pts. 5.2 Baler Maximum pressure: 9 tons Year of construction: 1992 Pressing force: 36 tons/m² Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power supply: 400 V/ 3.5 kW Bale binding: manual

Specifications Cutting width: 7.5 x 40-80mm the safety level DIN 66399: P-3 O-2 T-3 E-2 Productivity: 2500 kg/h Year of construction: 2012

Wood shredders, plastic shredders, garbage shredders, two-shaft shredders, shredders, shredders used Manufacturer: I.S.V.E. Srl Type: 80-80 D Year of construction: 2003 Insertion approx. 1500 x 900 mm Insertion height approx. 1600 mm Drive 2x 9 kW 380 V Dimensions: approx. 2400 x 1800 x 2400 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Specifications Industrial shredders IDEAL 4104 Shredder Cutting width: 6 mm Power supply: 400 V/ 4 kW the safety step P2 DIN66399-1 Year of construction: 1993 Productivity: ok. 70 sheets (DIN A4, 70g/m²) Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Cutting width: 12mm, 9mm, 6mm, 3mm Year of construction: 1988-1989 Productivity: approx. 70 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 200 mm/s the security level: P1 - P2 Power supply: 380 V/2.2 kW Machine is fully functional, after technical inspection We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Cutting width: 2 x 15 mm Year of construction: 2012 Productivity: approx. 35-40 sheets (DIN A4, 70g/m²) Price: on request the security level: P5 Power supply: 380 V/ 2.2 kW We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Shredder Cutting width: 7.8x55 mm Power supply: 400 V/7.5 kW the safety step: 2+1 wg DIN 32757 P-3, O-2, T-2 wg DIN66399 pts. 5.2 Productivity: ok. 300-500 sheets (DIN A4, 70g/m²) Baler Maximum pressure: 9 tons Pressing force: 1.94 kg/cm² Productivity: - Bale size: 770x600x500 mm Price: on request Bale weight: - Power supply: 400 V/4 kW Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

The MR 17-40 single-shaft shredder is particularly suitable for crushing small and highly resistant waste. The feed is controlled by a hydraulic control unit. The material is thus pressed against the rotor, whereby it is shredded. The size of the final fraction is determined with the help of the siebe. FEATURES: Engine: 7.5 kW (10 hp) Power of the hydraulic unit: 0.75 kW (1 hp) Transmission: by belt Rotors: 1 Rotor diameter: 170 mm Rotor length: 400 mm Number of reversible tools: 12 Number of usable tool pages: 4 Number of average rotor speeds: 95 Weight: 800 kg Throughput: 80-150 kg/hour Safety equipment: emergency stop, feed version system; Design according to CE standards Small multi-purpose machine for grinding numerous wastes. It can be connected in series for continuous operation. Recommended for crushing wood, plastic, paper, confidential documentation, panel ...

IsVE single-shaft shredder | MR 40-80 | 37 KW, 800-1200 t/h inwellenschredder ISVE | MR 40-80 Equipped with a shaft, the MR 40-80 shredder is particularly suitable for crushing large quantities of industrial waste. The heavy design makes the machine suitable for heavy use. A hydraulic control unit allows the drive of the pusher. In this way, the product to be crushed is pushed against a tool holder rotor, which crushes it. Thanks to a siever, it is possible to choose the final size of the crushing material. Power rotor: 37 kW (50 HP) Power of the hydraulic control unit: 4 kW (5.5 hp) Drive: via belts Number of rotors: 1 Rotor diameter: 400 mm Length of rotor: 800 mm Number of switchable tools: 35 Number of tool pages that can be used: 4 Average number of rotor revolutions per minute: 85 Weight: 4,000 kg Production: 800-1,200 t/h. Safety devices: emergency stop, d ...

Corrugated shredder for wood, plastic ISVE MS 20-60 | 200-400 kg/h The single-shaft shredder MS 22-60 is particularly suitable for crushing small and highly resistant waste. The feed is controlled by a hydraulic control unit. The material is thus pressed against the rotor, whereby it is shredded. The size of the final fraction is determined with the help of the siebe. FEATURES: Engine: 18.5 kW (10 hp) Power of the hydraulic power unit: 2.2kW (3 hp) Transmission: by belt Rotors: 1 Rotor diameter: 220 mm Rotor length: 600 mm Number of reversible tools: 27 Number of usable tool pages: 4 Number of average rotor speed: 85 Weight: 1800 kg Throughput: 200-400 kg/hour Safety equipment: emergency stop, feed version system; Design according to CE standards EXPLANATORY NOTES: Small to medium sized shredder, suitable for crushing a wide range of waste materials. It can be ...

n°1 Cutting chamber: 340x300mm. n°2 hexagonal shafts. n°25 counter-rotating blades, blade Thickness 12 mm or n°15 counter-rotating blades, blade thickness 20 mm, n°1 gearbox with electric motor 5, 5kW, 400V, 50Hz, Shafts rotation speed 18/20 rpm. Total weight of the Shredder 700 Kg.

n°1 Cutting chamber: 300x330mm. n°2 hexagonal shafts. n°33 counter-rotating blades, blade Thickness 10 mm or n°10 counter-rotating blades, blade thickness 30 mm n°1 reducer with electric motor 7, 5kW, 400V, 50Hz, Shafts rotation speed 18/20 rpm. Total weight of the Shredder 700 Kg.

Shredders, shredders, chippers for all woods and veneers , of unlimited length, and up to a thickness of 6 cm Fabr. Jensen Type A III 2 F with motor 11 Kw with conveyor belt Work width 250 mm with operating instructions

Radio installation Documentation 6 cylinder Mercedes Benz engine 4 pieces of new tires Workshop tested

Kleemann Baking Crusher Unit composed of: Pusher wagon Dim.: 6500 x 1300 mm Incl.: Electric motor Grizzly screening machine Screen area: 3500 x 1400 mm – 2 deckers Incl.: electric motor and springs Baking Crushers Type: SSTR 1250 Inlet opening:1250 x 950 mm Incl.: Electric motor Weight about 38 tons.

Impact mill Kleemann (for sand) Brand: Kleemann Type: 825 Inlet opening: 790 x 140 mm Incl: electric motor 160 kW

Catalog number 6726 TECHNICAL DATA - 280x300mm loading hopper inlet - outlet for shredded wood fi 310mm - rotor working width 340mm - 22kW main engine - number of knives 6 pcs - dimensions length / width / height 1300x1150x1680mm - weight 720 kg ADVANTAGES - very good condition - used chipper Net price: PLN 19900 Net price: EUR 4422 Net price, calculated at the rate of 4.50 PLN / EUR (with greater fluctuations in the rate, the price may change)

Komptech Crambo 3400 stationary universal shredder, YOC 2011 Manufacturer: Komptech Type: Crambo 3400 Year of construction: 2011 Operating hours: 3912 Drive: 160 kW Roller speed: max. 32 min-1 Roller length: 2820 mm Roller diameter: 610 mm Throughput: up to 45 t/h Machine weight: ca. 16.000 kg

SHREDDER KOMPTECH TERMINATOR 5000 E incl. control cabinet

New and unused high-performance shredder type Lindner Power Comet 2800 with pointed knife!. Drive power 2 x 132 kW. 186 pointed knife 43 x 43 mm. Ideal for document destruction, plastic shredding. Weight 29500 kg! Complete with control cabinet, Filling hopper, extraction hood and spare parts package.

Single-shaft shredder particularly suitable for secondary shredding, granulation of pre-shredded material. Application: Commercial waste for thermal or recyclable recycling, e.g. paper, cardboard, art and foams, rubber, leather, textiles, floor coverings. etc. Drive power: 2 x 160 kW ( 320 KW) Control cabinet: complete with FÜ, incl. control cable approx. 15 lm Filling opening : 2825 x 2030 mm Cutting chamber volume: 5.3 m³ Rotor length: 2805 mm Rotor flight circle: 740 mm Rotor speed: approx. 355 rpm at 50 Hz Number of rotor blades: 80 pieces New Rotor blades, wiper comb blades, counter blades: New Counter knife bottom: 16 pieces New Top wiper comb: 16 pieces New Power bands: New Clutch facings: New Rotor bearings: New Hydraulic cylinders: Sealing New Hydraulic feed: 11 kW Sieve: currently not assembled, will be reordered according to customer request 30; 35; 40; 50  ...

M&J 2000 8 fangs active on both sides, hourly output up to 50 tons depending on material and load Single shaft shredder with electric hydraulic drive 110kW Control cabinet little run in functional condition As a pre-shredder, bag ripper, dosing feeder, bale opener, For waste wood, household waste, containers with wheel loader feed hoppers Complete machine currently with conveyor chute discharge and stockpile conveyor belt Magnetic separators Control panel With disassembly and mounting package optional

Edge strip shredder for edge trimming plastic films.

Headquarters. Edge stiffener extraction

the two shaft shredder with knives 14 mm 3 hooks and 7.5 kw

Used Shredder for sale information on request! Spare shafts, renovations, repairs,