Manufacturer:
(Category: 503)
• Model: Lindner Urraco 95 DK, • Year of construction: 2021, • Operating hours: 7,230 h, • Engine: Scania V8 Diesel, 770 HP, • Drive: chain track with rubber pads, • Application: High-performance shredder for wood, trash, plastics, green waste, and root stocks, Including accessories, • 2 sentences shafts one used and one armored, – Suitable for wood, waste, plastic, green waste, and root stumps, – Both sentences are armored and ready for immediate use, • Model: Lindner Urraco 95, • Year of construction: 2021, • Operating hours: 7.230, • Drive: Tracked drive with rubber pads
Year of manufacture: 2021, • Betriebsstunden: 3.200 h, • Weight: approx. 37.5 tonnes incl. post-screen unit, • Engine: Cummins L9 – Stage V, • Post-screen unit: 1-deck incl. oversize return conveyor, • Wind sifter for oversize material, • Radio remote control, • Hopper extensions (8 m³), foldable, • Overband magnet, hydraulically liftable and lowerable, • Water pump for dust suppression incl. spray system, • Staubunterdrückung am Ablassband – Feinstaub, • SBM remote service CRUSH CONTROL including GPS
model: VB 750 D, Serial number: 110/667, Construction year: 11/2008, drive: diesel, engine speed: approx. 2,100 RPM, operating hours: 6.090 h, State: Used, operational, Availability: immediately, Working length: 2.000 mm, Total length of the shafts: 2.348 mm, length: approx. 7,500 mm, width: about 2,500 mm, height: about 3,000 mm, own weight: approx. 20 t, Motortyp: 2.348 mm
Woodzilla BBT 400 Drum Chipper Year of manufacture: 2023 Engine: Deutz 75 hp diesel Max. trunk diameter: 32 cm Height of inlet opening: 320 x 500 mm 360° machine slewing ring Length of feed table: 1300 mm Crane type: Z-Kraan BenTele -Crane reach: 5500 mm -Telescopic: 1100 mm Radio remote control Chassis: Tandem axle Speed up to 80 km/h Weight: 3500 kg
fire: Taurus, model: C872HD, Year of manufacture: 2010, box length: 7.0 meters, Box / Bale section: 900 x 600 mm, Pre-compression device: Sheet pre-compressor, Shearing force: 800 tons
fire: SCM Technology, model: CM 1000 Mobile, Year of construction: 2001, Length: 9990 mm, Width: 2550 mm, box: 6600 mm, Engine: Diesel engine, Cutting: 900 x 800 mm, General conditions: working, Cutting force: 1000 tons, Weight of machine: 39 t.
Very good condition four-shaft shredder UNTHA RS-30 The machine is located in a container with a discharge belt/articulated belt as a chain belt conveyor. Easy to transport, can be moved with a hook dispenser. Easy access to the container, wide inspection door. A very nice facility in a well-kept condition First Hand Machine! Operating hours only: 4,307 h Year of manufacture: 07.2019 Power: 2 x 11 kW Cutting opening L x W 420 x 560 mm Knife width: 18 mm Built-in strainer: Ø mm Electrical cabinet : complete with control Funnel Discharge belt Containers
ID3713 SCS 10.920 hours/hours Mobile Scrap Shear Mobile scrap shears
Lindner Jupiter 3200 low-speed single-shaft pre-shredder incl. hydraulic unit and control cabinet Mileage: 54,000 BH Year of Make: 2008 Machine was regularly serviced and repaired Application: Fragmentation of commercial and. industrial waste,
IDEAL Krug & Priester 1080 Lever Cutter Cutting Machine Material knife grinding angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets and other materials Regrindable knife set made of Solingen knife steel Complete with solid base and foot pressure Fold-out side table, right Side stop with scale in mm and inches Infinitely adjustable back gauge with locking screw Front gauge with locking screw and narrow cutting device Dial knob for exact measurement of the front gauge Printed DIN format classification A3 to A6 Fixed, transparent blade guard made of shatterproof plastic and knife locking device Particularly stable knife bearing made of cast aluminium and double-bearing knife axis for precise cuts Extremely robust metal construction GS Seal of Approval Brand quality Made in Germany Cutting length: 800 mm Cutting capacity: approx. ...
The BBT 400 Woodzilla is a 360° swivel, compact, Powerful, mobile drum chipper with aggressive feed, built on truck trailer chassis. Technical data Drive: Diesel, Deutz TCD 3.6, 100 KW (136 HP), Stage 5 Feed: 320 x 500 mm Chopping drum: 400 x 500 mm, 4 knives Trunk diameter max.: 32 cm Length of feed table: 1300 mm Outrigger: 4-fold hydraulic Z-Crane Ben-Tele 550 2 additional feed rollers Radio remote control for chippers and cranes Pendant towing eye: 40 mm Brake: Air pressure brake, Duomatic 2 additional feed rollers Radio remote control for chippers and cranes The machine is in mint condition. Location: NRW Availability: by arrangement Warranty: The machine is stored in the condition existing at the time of handover. sold. The seller assumes no liability for defects We reserve the right to sell in advance, make changes and repairs.
• Brand: EUREC, • Model: Z85, • Type: Double-shaft crusher on tracks, • Year of construction: 1999, • Availability: immediately, Weight: approx. 32 tonnes, • Shredder mouth width: 2.30 m, • Shredder mouth length: 1.80 m, • Shaft length: 1.85 m, • Hopper length: 5.40 m, • Hopper width: 2.50 m
• Brand: C.M.I, • Model: BF 4000, • Serial No.: 0046, • Year of construction: 2006, • Operating hours: approx. 4,500 h, • Weight: 62 t (without accessories), • No-load shaft speed: 3 rpm
ELDAN SUPER CHOPPER SC1412 T, Powerful crusher for Tires, Cables, Plastics, Wood, other waste materials, Sturdy supporting structure and frame, vibraring extractor, loading hopper, 90 kw Drive 400V 50 Hz, electric cabinet, Goood working conditions, See how it works [HERE](youtu.be/KgxG4KchZkI), Constructors description:, The ELDAN Super Choppers are heavy duty pre-choppers designed as first step in any recycling process. The Super Choppers can be used for pre-chopping of most materials like tyres (without prior debeading), all types of aluminium scrap, cables, electronic and electrical waste (i.e. WEEE), refrigerators, municipal solid waste (i.e. MSW), wind turbine wings (cut-off), plastics, and industrial waste., • Low speed, high torque enabling processing of tough material, • Powered directly by planetary gear and frequency converter enabling automatic reverse for overload protect ...
model: JLSS2000-#19, • Year of manufacture: 2022, • Operating hours: 35 h (demo machine), • Main power: 2 × 90 kW, • Gearbox type: #119 planetary reducer, • Shredding cavity: 960 × 1430 mm, • Rotor speed: 6–8 rpm, • Working capacity: 15–25 t/h
Rotor Dia. x W: 1.300 x 1.300mm. - Inlet: 1.360 x 1.000mm. - With 160KW E.Motor and Control-cabinet with soft-starter - New spare-parts in stock.
UNUSED - Size: 2.100 x 6.100 (6.900)mm. with WS 85 system. With Siebtechnik GR 45 Unbalance exciter, E.motor, Cardan-shaft and Rubber springs
UNUSED - Speed: 3.000 RPM - Frequency: 50 Hz - Voltage: 400V. - Amperage: 41A
Rotor Dia. x W.: 1.300 x 1.340mm. . With E.Motor and Inlet.
Opening: 850 x 590mm. - Shaft distance: 215mm. - With 15KW E.motor.
Size: 4.400 (2.750) x 1.200mm. - With Rubber wearplates (Metso Trellex SQ300) - 2 Pcs. Friedrich F2000-6-7.8 (5,6KW / 1.000RPM) Unbalance motors
Deck size: 2.000 x 5000 mm. - 2 Decks (Different deck-angle) - With electrical motors, cardan-shaft and springs - Can be sandblasted and painted.
Power: 211 kW - Ratio: 71:1 - RPM in/out: 1.485 / 20,9 - Shaft ø in: 70 mm. - Shaft ø out: 190 mm.
Roll Width: 1.000 mm - Roll Dia. 630 / 800 / 630 mm - With electrical motors
Rotor Dia. x W: 1.000 x 700mm - Included: 55 kW Electrical motor, Inlet, Hydraulic pump with control panel, 500 KG Service Crane. Many spare-parts in stock! Crusher can be sandblasted and painted.
UNUSESD - Power: 75 kW - Voltage: 230 / 400V. - Amperage: 240 / 137A. - Hertz: 50 Hz. - Ratio: 8,26:1 - RPM in/out: 1.480/179 RPM - Shaft ø out: 110 mm - Weight: 887 / 952 KG
