Manufacturer:
(Category: 308)
used
1 x BUZULUK 1920mm wide Four-roll 'L' calender - Type: 03506 - Rolls dia 710x1920 mm - Year of manufacture: 1989 - Peripherally drilled rolls - High pressure hot water heating (Steam 1.6 and 3.2 MPa) - Motorised nip adjustment to rolls 1, 2 and 4 (30mm adjustment) - Cross axis on roll 3 (0-30mm) - Roller Bearings - Unidrive gearbox with DC motor to each roll - Rolls 1 and 4: 46 kW - Rolls 2 and 3: 77 kW - Working speed of 4th roll max 60m/min In very good condition.
Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...
used
1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...
Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.
Farrel Bridge model 3D Banbury internal mixer, Machine no. 85R6001, May 1985, Chamber capacity: approx 65 litre net. 2 wing rotors, Roller bearings, FYA Seals, Drop door discharge with power pack, Pneumatic hopper, Standard Bullwheel/pinion drive, With Brush 200HP slip ring Motor, 981rpm, 3ph, 50Hz. Complete with oil immersed starter etc. Previously used on PVC
used
1 x Farrel Bridge four roll inclined Z formation Calender Year: 1956, Roll dimensions: 710mm dia. x 1675mm wide, Peripherally drilled rolls for heating/cooling, Drive configuration: 250 HP DC v/s motor through unidrive gearbox Roll differentials: 1&2 15%, 2&3 3%, 3&4 3% No. 4 bole speed Max 75m/min Main and auxiliary bearings: Bronze Bush type, Bearing lubrication: Re-circulating oil. Roll heating: High pressure hot water 17 bar capacity. Cheek material guides rolls 1 & 2: Fully adjustable width using 0.75 kW motor. Cross axis – yes (roll 4). Motorised roll nip adjustment – Roll adjustment 1, 2 ,and 4 – 3.75kW motors – Cross axis adjustment roll 4 – 3 kW motor, max adj. 50mm. Hydraulic pull backs – max pressure 70 bar.
Serial number: 10118000940114Operating voltage: 400 VFrequency: 50 HzConnection: 9.9 kWTemperature: up to 140°CReference: Alesco - Lot 97 Auction-ID: A7-49882-62
Medium oil, volume 300 l, temperature range up to 300 °C, total connection 35 A, total power 22.8 kW, flow rate 90 l/min Auction-ID: A1-49516-3
250 € 
