Manufacturer:
(Category: 308)
This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm
Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172
Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of both screwing units - separately adjustable distance between screwdrivers 250-540 mm - automatic screw feeding - automatic disconnection of the feeder movement - screw depth sensor - foot switch control Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - feed force pressure reducer - additional manual slot for various screws - extended travel +30 mm to 130 mm - laser positioning pointer - screw depth sensor - horizontal pressure
Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of the screwing unit - adjustable distance between screwdrivers 42-110 mm - Automatic screw connection - automatic automatic movement alignment - the ability to work as a screwdriver - screw depth sensor - powerless steering control - Specific feed account Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - screw depth sensor - horizontal pressure
BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 216 105 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL
Electric spindle press REITZ EHSP100F as laboratory heating press / demonstration machine Laboratory heating press with pressing pressure 40 KN (4 tons), ratio 1 : 16, spindle diameter 45 mm, pitch 8 mm, spindle stroke 0.5 mm per revolution. Gear motor 0.75 KW, 1,500 rpm, 4-pole, with spur gear i = 1:5, Speed 150 mm / min. Max dynamic load 25 kN. With reversible control, emergency stop and motor protection plug. Total weight approx. 100 kg, table surface 600 600 mm, pressing surface approx. 150 250 mm, clear height approx. 60 mm. Base made of high-quality aluminium profiles 4545 mm, the table top is made of glued plywood top. The laboratory heating press has 40 kN pressing pressure (dynamic load). The spindle is self-locking and thus maintains the pressing force for a longer period of time. For an extra charge with heating plate, insulating plate and temperatur ...
Eos EOSINT Here we offer an Eos EOSINT plastic laser sintering system. The following things are included with the EOS P380 system Installation space containers Powder containers Overflow container Cooler: Termo TEK Termochiller Type: P411-12448-1 3DM 8 zones process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Sannung 3/N/PE/ 400V AC Frequency 50 Hz Current value 8 kW Fuse 32 A MAX Power Laser 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.
3D-SYSTEMS ProJet 660 Pro 3D Printer Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. This means that even large models can be produced without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one printing process. 3D color printers with tremendous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. As a result, even with complex and detailed printouts, these 3D printers do not require dedicated support structures. The non-solidified powder supports the components during printing and is then recycled semi-automatically. Applications Communication of form and design, installation analyses, first fun ...
Type: W/ARW 2200/12 Flying Splice Comm. 2011-001.1 Working width: 2200 mm Finished roll weight max. 2000 kg Finished roll diameter max. 2x 1200 mm Finished roll width min. 800 mm; max. 2200 mm Material Paper/ Foils 75 μm – 1000 μm Machine speed max. 1500 m/min Depending on the type of material and material thickness achievable Web tension: max. 1000 N Finished roll sleeves: inside 152.4 mm outside 162.4 mm - Type of cardboard sleeve, plastic - Sleeve tolerance according to DIN 6748 or 55470 Unwinding: Type ARW 2200/12 Unwinding: axisless 2 x 1200 mm; sleeve holder 6" L.W. (other dimensions with additional accessories possible) Sleeve holder: 6" L.W. (other dimensions with additional accessories possible) Pulleys: DM approx. 150 mm Brake: Generator brake with energy recirculation, control via ultrasonic sensor Path control: Edge control E&L with ultrasonic sens ...
machine measurements: 9.657 x 1.472 x 1.985 mmmachine weight: -- kgpower capacity: -- kWCondition: used - as good as newSpecification: FFP 2 N95 mask system completeConsisting of:- see sketches in the plant- cycle time approx.: 35 - 50 pieces/min- not CE certified- Space requirement approx.: 9,657 x 1,472 x 1,985 mm- Completely assembledThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PINETTE PEI Vertical compression press 1500T SMC, closing force 1500T
M. No.: 560037 // Com.No.: 451.4013 // No. 2620 Colours: 6 // Performance: up to 36’000 cups per hour Equipment / Additional information: Consists off: • Stacker • Printing machine • Cup feeding • Stapler Max. cup rim diameter: 130 mm Min. cup rim diameter: 55 mm Production speed each according to cup size, quality and Raw materials with UV drying: up to 24,000 cups per hour (without positioning) With positioning 12'000/h - 15'000/h depending on cup, format and flap. El connection value with drying: approx. 26 kVA Electrical connection: 3 x 400 V, 50 Hz Air connection / consumption: 6 bar / approx. 50 m3/h Weight: approx. 7,800 kg This machine doesn’t have cup positioning.
- technically efficient, ready to work – after full service - 6 spindles - automatic - variable angle lower spindles - spindle top 90 degrees
Wide slot nozzle, used, according to signage. 1420 mm width, adjustable lip. Adjustable top lip.7-15mm approx Removable Bottom Lip Vertical Choker bar 20mm infeed port. Decals. Used, purchased as seen, without warranty or other warranty. Delivery ex works CH, immediately upon arrival payment.
With the three-head roller saw, plastic-coated films can be sawn from wide roll to customer roll. With the system, film rolls can be sawn on 3" and 6" cardboard or plastic sleeves. The first cutting head is firmly positioned and defined as a master. The other two cutting heads are positioned to the master on the desired cutting width. A maximum of 2 benefits are possible. Sawing operations can be sawn dry, or wet by a wetting device of the saw blade. • Mesh type: Saw Material: Foil • Cutting system: circular saw s600 mm ( 3 saw cuts ) Saw cutting width: 6mm • Space usage: 7m x 4m Dimensions machine: 4.20m x 2m (height closed 2.15m, open 3,50m Sleeve width max.: 2700mm Cut width max.: 2620mm Cutting width min.: 500mm • Rolls max. : 550mm • Rolls min. : 200mm Sleeve diameter: 76mm/152mm
Laminating unit (not complete machines) The machine is used for the coating of a product web with simultaneous Laminating a second goods railway. Products = 200-800my PET with 40-80 my PE Working width max. = 1600 mm, Speed = 70 m / min Approximately 1000 operating hours New price approx. = 400,000 euros) Accessories: 1x Barrel melter 1 x storage unit 50 liter / 86 KW Nozzle
Cooling tray type KW 1000-200-200 self-sufficient for strand cooling in the production of granules or filaments. - a mobile and height-adjustable base frame made of welded steel raw, left machine version, painted - Frame-height adjustment of the top edge of the water bath from 900 mm to 1050 mm - a VA cooling tray 1000x200x200mm - 2 pieces adjustable and mounted strand holder - clamped to water edge - 1 piece wiper bled for partial strand drying - 1 piece of adjustable tub plug for filling height adjustment - 1 piece of VA water tank (reservoir) as service water tank - 1 piece of bacon water pressure pump to supply the cooling tank with sufficient cooling water from the water tank - 1 piece of direct 1/2" fresh water connection via float switch and solenoid valve for connection to the customer's side Fresh water network - Tub overflow - drain pipe DN50 for connection to ...
Mobile vacuum station for use on a degassing opening on the extruder or tool as well as for support in vacuum profile forming - a water ring vacuum pump VG-55 mounted on a welded and painted steel base frame with maximum vacuum Volume of 55m3/h, with kpl. connected supply and cooling system - Vacuum connection: 1x connection pipe with internal thread R1" or GEKA coupling and hydraulic hose 2TE DN25 length 700mm - a VA service water separator and storage tank with fresh water connection R1/2", level switch and drain tap for easier daily cleanse - a cooling coil built into the separation tank and removable cooling coil made of hde-ribbed tube - Water drain on water tank: R1 1/4" - Cooling water connection to cooling coil: R3/8" - an additional vacuum separation container made of steel (hot-dip galvanized) in front of a vacuum pump for separation (diffusion) of the ...
PVC - heating / cooling mixing combination Hot mixer 750 ltr. / Cooling mixer 2,500 l. Engine power: 212 + 45 kW
- 5 aluminium silos with attachment filter incl. discharge screw with slide made of V2A - 4 aluminium silos for manual filling with discharge screws - 3 dosing scales - Optional with dust filter
Laser printer for plastics FARSOON eForm 3D built in 2017. The printer is offered with complete equipment for preparing powder and cleaning prints. The equipment was used to a small extent for about 12 months, it worked for about 2000 hours. The device operated in a gas shield from a cylinder. Complete with printer: 8 nitrogen regulators. Technical data of the FARSOON eForm 3D printer: - open control software: any modification of printing parameters - laser type: CO? - laser power: 30 W - dimensions of the printing chamber (W × D × H ) : 250 × 250 × 320 mm - single print layer: 0.06 ~ 0.3 mm, adjustable - maximum creation / build speed: 0.8 l / h (depending on the material) - precise scanning system: Galvo - scanning speed: 7.6 m / s - power requirements: 380 VAC, 50/60 Hz, 16 KVA, three-phase five-wire - maximum temperature in the chamber: 190 degrees C - heating el ...
PRE-ALPINE REGENERATION LINE COMPLETELY REVISED, ELECTRICAL WIRING, VENTILATORS, PULPIT. EQUAL TO THE NEW! MATERIAL: PE PP PC PS ABS HOPPER WITH DOSING UNIT EXTRUDER WITH DIAM SCREW. 105 MM. 35 L/D AVERAGE PRODUCTION 300/450 KG/H BASED ON MATERIALS ENGINE: 117 KW OIL PUMP VACUUM DEGASSING PUMP centrifuge Cabinet
Stock - No.: 1820 1 used, overhauled CUBE DICER as type Sagitta - LANCELIN BG 200 working width 200 mm drive 7,5 kW – NEW cutting tools 4 x 4 x 3 mm cube pellets incl. pneumatic infeed roller system More pelletizing equipment ex our stock Wuppertal Germany available, Ask for our most recent stock-list or visit us
Stock - No.: 1624 1 piece used strand pelletizer PREVIERO > adjustable cutting length type TA 200 NA year 1996 – partly overhauled in 2020 drive 4 kW + 0,37 kW 200 mm cutting width new control board FU controller We have more strand-pelletizers, waterring or underwater pelletizing units available ex stock Wuppertal Germany, You´re welcome to visit us. Please find our stock-list on the Homepage: plastictrading
No.: 2324 1 used strand-pelletizer Alphatec type AS-G 200 E year 2019, very good condition - lab / demo use only working width: 200 mm drive 7,5 KW – AC frequency controlled cutting rotor with hard-metal teeth pneumaticm pressure roller device Machine is ready for demo. More strand-pelletizer ex our Stock available: Scheer, Automatik, Rieter, IPS, AlphaTec, Pelltec, .. Our actual machine stock-list you can find on our Homepage: plasticotrading.de
For sale TWO (2) complete lines for plastic caps with molds, include: (2 pcs) CCM001 SACMI LINES with moulds for HL3 cap (Coca Cola approved high cap with Liner) Condition: Fair condition. Were Working at moment of disconnection in 2015. Origin Italy. Exworks South America 380volts 50Hz Huge Lot of Sacmi genuine spare parts.
Technical details: Plate length: 3,000-1.250 mm Plate width: 1,250-1,000 mm Plate thickness: 40-250 mm including separation, stacking incl. div. milling pictures incl. documentation last usage: 2015
Calender with stretching line Roll width: 450 mm Diameter of roller: 252 mm Stretching line length: 2500 mm incl. 4 GWK temperature control units, 12 kW heating capacity
