injection moulding machines used for sale (1,125)

Battenfeld HM 240 1330 2011 Battenfeld TM 400 2250 2009 We have 2 thermoset injection machine to sell. Battenfeld BCT 1800-1000 year 1994 (with Robot) Battenfeld BCT 1800-1000 year 1993 TM 27001900 BA 600200 CDC TM35001330 BA 1000 BKT THERMOSET INJECTON MACHINES Thermoset Inj. Machine- I Thermoset Inj. Machine- II With Battenfeld Robot BATTENFELD BCT 1800/100 BATTENFELD BCT 1800/100 Construction Year 1993 1994 Screw Diameter Ø60 mm Ø55 mm Clearance between tie bars 515 x 515mm 515 x 515mm Day light 1.000mm 1.000mm Working Hours 81814 h 57929 h Also: Name Battenfeld Battenfeld Type of machine HM-E 240/ 1330 INSIDER TM-E 400/2250 Control system Unilog B6E Unilo ...

Sumitomo Demag injection molding Systec Wittmann Robot Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021

Control: P 2000Technical dataMax. temperature: 250 °CExecution: dryingWorking space:Width: 600 mmHeight: 400 mmdepth: 600 mmPower of the heating: 18 kWAmpere: 25 AVoltage 50 Hz 3x: 400 VoltMachine´s weight about: 250 kgExternal dimensions:Length: 800 mmWidth: 800 mmHeight: 1500 mmVarious accessories:Ventilating / pulsated air

Technical dataMax. temperature: 500 °C

Technical dataMax. temperature: 950 °CWorking space:Width: 100 mmHeight: 100 mmdepth: 300 mmTotal installed power: 3 kWVoltage 50 Hz 3x: 380 VoltMachine´s weight about: 150 kgExternal dimensions:Length: 1000 mmWidth: 700 mmHeight: 1100 mmVarious accessories:Protective furnace gas device

Mannesmann Demag D60 - 182 NC3 Plastic injection moulding machine

Arburg 520C-2000-675 (154) without funnel General information Item number: 154 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 240 g Clamping force: 2,000 kN Screw diameter: 45 mm Spray pressure: 2500 bar Spar spacing: 520 x 520 mm Clamping plate size: 715 x 715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 126766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Euromap: Yes Air valve: Yes

clamping force: 500 kNinjection volume: -- cm³screw diameter: 25 mmplaten size: 400 x 400 mmCondition: used,Specification: horizontal injection molding machine, - usedinjection unit:- Screw diameter: 25 mm- shot volume max.: -- cm³- injection pressure approx.: 1290 bar- heating zones: 4- Heating power: 4 kWclamping unit:- clamping force: 500 kN- opening stroke max.: 325 mm- platen distance max.: 550 mm- clamping platen size approx.: 400 x 400 mm- tie bar distance: 270 x 270 mm- pump motor: 15 kW- total power: 19 kW- operating voltage: 380V, 50Hz- Weight approx.: 1.870 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Injection Molding 300T Wittmann, 2017 year at Germany. EcoPower 55 – 550 t EcoPower Xpress 160 – 550 t MicroPower 15 t MacroPower 400 – 2000 t SmartPower 25 – 400 t CM 40 – 80 t VM R 40 – 300 t VM 60 – 200 t VPower 120 – 300 t R WITTMANN BATTENFELD injection molding

Injection Molding 300T Wittmann, 2017 year at Germany. EcoPower 55 – 550 t EcoPower Xpress 160 – 550 t MicroPower 15 t MacroPower 400 – 2000 t SmartPower 25 – 400 t CM 40 – 80 t VM R 40 – 300 t VM 60 – 200 t VPower 120 – 300 t R

Capacity: 0 t Control: Cybelec S-DNC-8879-PSTechnical dataPressure: 800 kNTotal working length: 2050 mmDistance between thestandards: 2050 mmStandard depth of throat: 255 mmSlide stroke, working stroke:from: 215 mmMounting height max.: 390 mmWorking speed:Press stroke: 8 mm/sup: 60 mm/sVoltage 50 Hz 3x: 380 VoltMotor power: 5.5 kWMachine´s weight about: 6700 kgOverall dimensions machine:Length: 3700 mmWidth: 2000 mmHeight: 3400 mmVarious accessories:Set of bending toolsSet of retaining clampsMotorized stop: 500 mm

(1) Gas (2) Fuel (3) Electric: 0  Temperature maximum: 0 C°Capacity (kg): 0 kg Technical dataMax. temperature: 1000 °CExecution: hardeningWorking space:Width: 100 mmHeight: 140 mmdepth: 300 mmExternal dimensions:Length: 1000 mmWidth: 850 mmHeight: 1400 mm

(1) Gas (2) Fuel (3) Electric: 0  Temperature maximum: 0 C°Capacity (kg): 0 kg Technical dataMax. temperature: 1000 °CExecution: hardeningWorking space:Width: 100 mmHeight: 140 mmdepth: 300 mmExternal dimensions:Length: 1000 mmWidth: 850 mmHeight: 1400 mm

Capacity: 0 t Operating hours: 32165Technical dataPressure: 25 toMax. Bending length: 1250 mmPassage between press bars: 320 mmDistance between the: 1020 Max. stroke: 100 mmDepth of throat: 200 mmFeed rate: 75 mm/sWorking speed: 10 mm/sReturn stroke speed: 80 m/minTable length: 1200 mmTable width: 60 mmTable height: 865 mmNumber of spacers: 6 pceHeight of the spacers: 120 mmNumber of cylinder: 1 pceOil capacity: 30 lVoltage 50 Hz 3x: 400 VoltMotor power: 4 kWMachine´s weight about: 1600 kgOverall dimensions machine:Length: 1800 mmWidth: 1200 mmHeight: 2000 mm

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number ...

UNDER NEGOTIATION two HUSKY GL300 PET machines for sale, available 2022 Q1 Both upgraded by Husky to run 72 cavities molds, in production, exworks Europe Ask for details,

ALREADY SOLD Hylectric 90ton HL90 RS45/42 for sale ask for details 400volts 50hz

screw size: 98 mminjection shot weight in Polysterol: unbkt. g/PSclosing pressure: 8600 kNtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 4200 kNinjection volume: 572 - 1716 cm³screw diameter: 90 mmplaten size: 1040 x 1040 mmclosing stroke: 620 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 84 mminjection shot weight in Polysterol: unbkt. g/PSclosing pressure: 440 kNvolumn: 1660 volt: Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 62 mminjection shot weight in Polysterol: 903 g/PSclosing pressure: 3300 kNtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 700 kNinjection volume: 103 cm³screw diameter: 30 mmplaten size: 432 x 310 mmclosing stroke: 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: -- kNinjection volume: 230 cm³screw diameter: 40 mmplaten size: 475 x 475 mmCondition: used,Specification: Horizontal injection moulding machine,injection unit:- Screw diameter: 40 mm- Cylinder diameter: 40 mm- Spraying volume: 230 cm³.Clamping unit:- tie bar distance: 475 x 475 mm- Operating hours approx.: 30000 h- Air valve- Core pull- 12-way hot runner controllerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 1.300 kNinjection volume: 106 / 43 cm³screw diameter: 30 / 25 mmplaten size: 850 x 750 mmdaylight between platens - max.: 900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 1.750 kNinjection volume: 318 cm³screw diameter: 45 mmplaten size: 700 x 700 mmdaylight between platens - max.: 460 mmCondition: used,Specification: Horizontal injection moulding machine,Injection unit:- Screw diameter: 45 mm- Screw length L/D: 20- Spray volume: 318 cm³- Shot weight max.: 287 g- Special spraying pressure: 2,100 barClamping unit:- Max. clamping force: 1,750 kN- clamping plates: 700 x 700 mm- Opening path max.: 460 mm- mould installation height: 150 mm- Operating hours: 89217 h- 1x core puller- Handling / Robots: ENGELThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 350 , 78 , 30

Manufacturer: Demag Type: Ergotech 35/320 - 120 concept Year of construction: 2005 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar spacing: 320 mm x 320 mm Plate size: 460 mm x 450 mm Tool height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 30 mm Lifting volume: 88.3 cc / 78 gram PS Injection pressure: 1393 bar general Engine: 11 kW Heating: 8.3 kW Dimensions: 3.4 m x 1.2 m x 1.8 m Weight: 2750 kg Screen text: German Additional equipment Robot interface Core train: x1 Air valve: x1 Temperature control point for hot duct

Key data: 1500 , 210 , 40

Manufacturer: Demag Type: 150/475 - 440 concept Year of construction: 1999 Control: NC 4 Control Locking type: Knee lever Closing force: 1500 kN Tie bar spacing: 475 mm x 450 mm Plate size: 690 mm x 660 mm WZ Installation height: min 230 max 460 mm Opening distance: 450 mm Plate spacing max: 910 mm Screw: 40 mm Lifting volume: 231 ccm / 210 gram PS Injection pressure: 1855 bar general Engine: 22 kW Heater: 11.7 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 6600 kg Screen text: German Optional extras Core train: x1 central lubrication Air valve Robot interface

Key data: 800 , 153 , 35

Manufacturer: Battenfeld Type: HM 80/350 S Year of construction: 2005 Control: Unilog B4 Closing force: 800 kN Closing type: Hydraulish Tie bar spacing: 370 mm x 420 mm Plate size: 544 mm x 544 mm Tool height: min 225 mm Opening distance: 475 mm Plate spacing max.: 700 mm Screw: 35 mm Lifting volume: 169 ccm Injection weight PS: 153.8 gram HP Injection pressure: 2083 bar general Engine: 15 kW Heating: 10,4 kW Dimensions: 3.7 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Key data: 1100 , 198 , 40

Manufacturer: Krauss Maffei Type: KM 110 - 520 C2 Year of construction: 2003 Control: MC 4 Closing force: 1100 kN Closing type: Hydraulish Tie bar spacing: 470 mm x 470 mm Plate size: 745 mm x 770 mm Tool height: min 300 mm Opening distance: 600 mm Plate spacing max.: 900 mm Screw: 40 mm Lifting volume: 217 ccm Injection weight PS: 198 gram HP Injection pressure: 2377 bar general Engine: 18.5 kW Heating: 13 kW Dimensions: 4.5 m x 1.5 m x 2.2 m Weight: 6000 kg Screen text: German / English Additional equipment Robot interface Core train: x1 Accu

Manufacturer: Arburg Type: 470 C 1500 - 350 Year of construction: 2005 Control: Selogica Closing type: Hydraulic Closing force: 1500 kN Tie bar spacing: 470 mm x 470 mm Plate size: 650 mm x 650 mm Tool height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 45 mm Lifting volume: 230 ccm / 210 gram PS Injection pressure: 1670 bar general Engine: 30 kW Heating: 10,2 kW Dimensions: 4.9 m x 1.7 m x 2 m Weight: 4600 kg Screen text: German Optional extras Robot Arburg Multilift + 100mm column extension El. Dosing + LGS 6 heating control points Robot interface Core train x1