Manufacturer:
(Category: 301)
Krauss Maffei PET Machine with Milk neck finish mold 27.5G 48cav 450-4500 CS PET 450Ton year 2010 Mold 27.5Grams 38mm Milk neck finish (requires attention) 48 cavities 25sec cycle Can be inspected
2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 77k Motivated seller seller offer No. resale 070623B
2 weeks offer - will not last Hypet400HPP P100 120 E140 year 2011 Plastcis systems auxiliaries NO MOLD working hours 70k Motivated seller
Arburg April 2014 model 920H 5000-4600 500 ton Can be inspected and seen in production
Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2010 Expected delivery July2023 Can be inspected and seen in production
Hypet400HPP P100/120 E140 + 96 Cavities Husky Mold + Piovan Auxiliaries Year 2008 21.7g 96cav mold Expected delivery July2023 Can be inspected and seen in production
HUSKY HPETL230E-RSE95D-95 + 48 CAV HOT RUNNER + AUX inc CHILLER DEC 2015 Mold: INCLUDED (HUSKY) ATTENTION NO COLD HALF INCLUDED Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FAST DELIVERY LOCATED IN ASIA FREQ BOTH 50 AND 60HZ
clamping force: 1.000 kNinjection volume: 203 cm³screw diameter: 40 mmplaten size: 580 x 652 mmCondition: used,Specification: Horizontal 2K-injection moulding machine,injection unit 1:- Screw diameter: 40 mm- injection volume: 230 cm³- weight: 205 gClamping unit:- Clamping force: 1000 kN- Centring: 125 mm- Platen size: 580 x 652 mm- Mould size: 400 x 400 mm- Mould thickness min.: 250 mm- Mould thickness max.: 450 mm- 1x core pull- Voltage: 3x 400V, 50Hz, N, PE- Total power: 25 kW- Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm- Weight approx.: 4,750 kgFurther DEMAG plastic injection moulding machines and aconveyor control/material station for 4 to 56separators for granulate conveying on our homepage.The data for this ad was created with ModulMWS - the software solution ...
clamping force: 6500 kNinjection volume: 2011 / 323 cm³screw diameter: 80 / 45 mmplaten size: 1450 x 1350 mmCondition: used,Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1:- Screw diameter: 80 mm- injection volume: 2.011 cm³- weight: 1810 ginjection unit 2:- Screw diameter: 45 mm- injection volume: 323 cm³- weight: 290 gClamping unit:- Clamping force: 6500 kN- Centring: 200 mm- Platen size: 1450 x 1350 mm- Mould size: 1000 x 910 mm- Mould thickness min.: 450 mm- Mould thickness max.: 950 mm- 2x core pull- Handling: Yes- Voltage: 3x 400V, 50Hz, N, PE- Total power: 245 kW- Dimensions L/W/H: approx. 10,100 x 5 ...
clamping force: 4200 kNinjection volume: 1212 /292 cm³screw diameter: 70 /15 mmplaten size: 1200 x 1100 mmCondition: used,Specification: Horizontal 2K-injection moulding machine, DEMAG Multi 420/810-2300h/430 incl. handling injection unit 1:- Screw diameter: 70 mm- injection volume: 1.112 cm³- weight: 880 ginjection unit 2:- Screw diameter: 15 mm- injection volume: 292 cm³- weight: 190 gClamping unit:- Clamping force: 1200 kN- Centring: 160 mm- Platen size: 1200 x 1100 mm- Mould size: 810 x 710 mm- Mould thickness min.: 380 mm- Mould thickness max.: 940 mm- 4 & 4 Cascades- 4x core pull- Handling: Yes- Voltage: 3x 400V, 50Hz, N, PE- Total power: 192 kW- Dimensions L/W/H: appr ...
clamping force: 800 kNinjection volume: 106 / 42 cm³screw diameter: 30 / 22 mmplaten size: 600 x 600 mmCondition: used,Specification: Horizontal 2K-injection moulding machine,injection unit 1:- Screw diameter: 30 mm- injection volume: 106 cm³- weight: 94 ginjection unit 2:- Screw diameter: 22 mm- injection volume: 42 cm³- weight: 37 gClamping unit:- Clamping force: 800 kN- Centring: 125 mm- Platen size: 600 x 600 mm- Mould size: 420 x 420 mm- Mould thickness min.: 250 mm- Mould thickness max.: 590 mm- Voltage: 3x 400V, 50Hz, N, PE- Total power: 42 kW- Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm- Weight approx.: 5,750 kgFurther DEMAG plastic injection moulding machines and aconveyor control/material station for 4 to 56separators for granulate ...
Arburg 420C-1300-350 (186) with conveyor belt, bimetallic screw General Information SKU: 186 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Injection weight: 210 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Tie bar spacing: 420 x 420 mm Clamping plate size: 605 x 605 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 88000 h Weight: 4080 kg Dimensions: 4.5 x 2 m Funnel: No Core train: Yes Euromap: Yes
Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes
Arburg 520C-2000-800 (193) Description with conveyor belt, bimetallic screw General Information SKU: 193 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 434 g Clamping force: 2,000 kN Screw diameter: 55 mm Spray pressure: 1650 bar Tie bar spacing: 520x520 mm Clamping plate size: 728x728 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 80000 h Weight: 7300 kg Dimensions: 6x2 m Funnel: No Core train: Yes Euromap: Yes
ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...
BOY 90A (102) Description Without funnel General information Item number: 102 Availability: In stock Year of construction: 2006 Brand: Boy Specifications Injection weight: 193 g Clamping force: 900 kN Screw diameter: 42 mm Spray pressure: 1724 bar Tie bar distance: 430x360 mm Clamping plate size: 635x610 mm Tool installationheight min.: 250 mm Control: Procan CT Language: German Power: 26.3 kW Operating hours: 15070 h Weight: 3100 kg Dimensions: 4.9x1.2x2.1 m Funnel: No
Piston spindle injector, brand: Main Group, model: Mode10 Booster 4, 4 seats. Two injectors, press measurements: 580 X 470, 120 Tn closure, year: 2001.
warehouse no.: 503293 manufacturer: ARBURG type: Allrounder 470 C 1500-350 controller: Selogica year of construction: 2003 operation hours: 53000 h clamping force: 1500 kN distance between tie bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2050 bar equipment included: screen text german core pulling hydraulically 2x machine without material hopper Anti vibration mounts mould heating 6x measures of machine lxbxh: 4.68m x 1.3m x 2.18m total weight: 4410KG
clamping force: 800 kNinjection volume: 177 cm³screw diameter: 35 mmplaten size: 580 x 580 mmCondition: used,Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400- Internat. Size specification: 800 - 400injection unit:- Screw diameter: 35 mm- L/D - ratio: 20D- Injection volume: 177 cm³- Injection pressure: 2387 bar- Cylinder heating: 8,8 kWclamping unit:- Clamping force: 800 kN- Max. opening stroke: 450 mm- Mould installation height: min. 250 mm- Max. platen distance: 700 mm- Mould clamping platens: 580 x 580 mm- Clear column distance: 400 x 400 mmTotal machine:- Oil tank filling: 220 ltr.- Pump capacity: 15 kW- Voltage: 3x 400V, 50 Hz, N, PE- total power: 23,8 kW- Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm- Weight without ...
clamping force: 600 kNinjection volume: 106 cm³screw diameter: 30 mmplaten size: 590 x 600 mmCondition: used,Specification: Horizontal injection moulding machine, type: System 60/420-200- Internat. Size specification: 600 - 200injection unit:- Screw diameter: 30 mm- L/D - ratio: 20D- Injection volume: 106 cm³- Injection pressure: 1995 bar- Cylinder heating: 8,3 kWclamping unit:- Clamping force: 600 kN- Max. opening stroke: 450 mm- Mould installation height: min. 250 mm- Max. platen distance: 700 mm- Mould clamping platens: 590 x 600 mm- Clear column distance: 420 x 420 mmTotal machine:- Oil tank filling: 180 ltr.- Pump capacity: 22 kW- Voltage: 3x 400V, 50 Hz- total power: 30,3 kW- Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm- Weight without oil approx ...
Key data: 1000 , 166 , 40
Manufacturer: Arburg Type: 420 C 1000 - 350 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar spacing: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool height: min. 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 30 mm Stroke volume: 106 ccm / 97 gram PS Injection pressure: 2500 bar General Motor: 22 kW Heating: 5,8 kW Dimensions: 4,3 m x 1,6 m x 1,8 m Weight: 3700 kg Screen text: German Additional equipment: Robot Interface
Key data: 500 , 132 , 35
Manufacturer: Arburg Type: 320 C 500 - 250 Year of production: 2002 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Max distance between plates: 550 mm Screw: 35 mm Stroke volume: 144 ccm / 132 gram PS Injection pressure: 1820 bar General Motor: 15 kW Heating: 6,5 kW Dimensions: 3,4 m x 1,4 m x 1,7 m Weight: 2830 kg Screen text: German Additional equipment Robot interface Core pull hydraulic: x1
Key data: 600 , 172 , 40
Manufacturer: Arburg Type: 370 C 600 - 250 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 600 kN Tie bar spacing: 370 mm x 370 mm Plate size: 570 mm x 570 mm Tool height: min 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 40 mm Stroke volume: 188 ccm / 172 gram PS Injection pressure: 1390 bar General Motor: 11 kW Heating: 5,5 kW Dimensions: 4,2 m x 1,5 m x 1,7 Weight: 3400 kg Screen text: German
Manufacturer: Arburg Type: 320 C 500 - 150 Year of production: 2000 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 498 mm x 498 mm Tool height: min 225 mm Opening distance: 350 mm Plate spacing max.: 575 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15 kW Heating: 4,8 kW Dimensions: 3.4 m x 1.4 m x 1.7 m Weight: 2250 kg Screen text: German Additional equipment: Machine with handling Multilift Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor
Manufacturer: Arburg Type: 270 C 300 - 100 Year of construction: 1999 Control: Selogica Closing type: Hydraulic Closing force: 300 kN Tie bar spacing: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Stroke volume: 70 ccm / 59 gram PS Injection pressure: 1550 bar General Engine: 7,5 kW Heating: 4.7 kW Dimensions: 3.4 m x 1.4 m x 1.6 m Weight: 2000 kg Screen text: German
PLATEN SIZES: 2200 X 2100MM MIN MOULD HEIGHT: 650MM MOULD OPENING STROKE: 1600MM MAX DAYLIGHT: 3000MM EJECTOR STROKE: 400MM SCREW DIAMETER: 120MM INJECTION PRESSURE: 1500BAR STROKE VOLUME: 6107CM3 CONTROLS: SEF 2000 TOUCH SCREEN MOTOR: 90KW HEATING CAPACITY: 60.9KW SCREW DRIVE: HYDRAULIC CORE PULLING: 2 AIR VALVE: 2
Sell Vacuum pump used Type: Busch 250-138, Vacuum: 20 mbar, Motor Oil: Type SAE30, Engine: Delfin, Year of manuf.: 2012, Power 3,45 kW, 230 volts, 15 A,
Ref. no.: 18138Producer: DEMAGYear of construction: 2006Clamping unitClamping force: 80 tonOpening stroke: 850 mmDistance between tie bars: 370 X 3370 mmMould height min.: 200 mmMould height max.: 510 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 22 mmInjection volume: 37 cm³Shot weight: 32 gInjection pressure: 2580 barMeasurements and weightDimensions: 4,50 X 1,28 X 1,95 mMachine weight: 4750 kg
ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60
PONAR ŻYWIEC UT-090 H injection moulding machine was manufactured in 2001 in Poland. The machine, designed for plastic injection moulding, is equipped with high-end components, increasing productivity and ensuring high reliability. Located on the body of the injection moulding machine, an operator’s panel with an installed MOOG-BUHL CNC controller allows for complete automation of the injection process and control of parameters. Moulds with a minimum height of 225 mm, mounted on 615 x 615 mm platens, are closed with a force of 90 tonnes by a hydraulic clamping unit protected by fixed and movable guards. The combination of the high clamping force of the mould, together with a powerful screw with a diameter of 30 mm, guarantees the best quality of the manufactured products. The extensive equipment offered with the UT 090 H injection moulding machine includes a pneumatic plastic feede ...
MEB Maschinenhandel GmbH
