Manufacturer:
(Category: 301)
Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones
Screw diameter; 40 mm Injectable volume: 201 cm3 Injection pressure: 1859 bar Turntable: 1040 mm Mould thickness min: 300 mm max: 600 mm Cores: 3 Robot Interface: Yes Mold Heating Zones: 8
Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3
Screw diameter; 55-35 mm Injectable volume: 558 - 139 cm3 Injection pressure: 2380-2500 bar Column width: 630 x 630 mm Mould thickness min: 300 mm max: 600 mm Aperture stroke: 600 mm Cores: 2 Robot Interface: Yes Options: Rotating base: Arburg 243849 year: 2012
Screw diameter; 60 mm Injectable volume: 792cm3 Injection pressure: 2500 bar Column width: 720 x 720 mm Minimum mould thickness: 300 mm max: 700 mm Aperture stroke: 700 mm Cores: 3 Robot Interface: YES Options with ARBURG robot
Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column
Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)
clamping force: 1300 kNinjection volume: -- cm³screw diameter: 45 mmplaten size: 470 x 470 mmCondition: used,Specification: Horizontal injection moulding machine, Type: Allrounder 470 S 1300-350Injection unit:- Screw diameter: 45 mm- Centring ring diameter: 125 mm- Shot weight max.: 210 g (PS)- Injection pressure: 1,840 barClamping unit:- Clamping force: 1300 kN- Opening stroke max.: 850 mm- Mould installation height: min. 275 mm- Mould mounting platens: 470 x 470 mm- Operating hours approx.: 91,000 - Core pulls: 1x- Valve gate: 1x pneumatic- Hot runner control points: 12x- Temperature control unit interfaces: 6x (20 mA)- Conveyor belt in the machine- Selector unit. available- Release for high temperature up to 450°C- Communication card for ProSeS interface available- Robot ...
Key data: 1500 kN, 141 g/PS, 35 mm
Arburg 520S-1500-400 (217) General information SKU: (217) Availability: In stock Year of construction: 2008 Brand: Arburg Specifications Spray weight: 141 g Clamping force: 1,500 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 688 x 688 mm Tool installation height min.: 250 mm Control: Selogica Language: English,German Power: 33.9 kW Hours: 45343 h Weight: 6490 kg Dimensions: 4.9 x 1.7 m Funnel: No Core Train: Yes Euromap: Yes Air Valve: Yes Heating cans: Yes C90fn8e
Type Injection Moulding Machine Category Plastic Processing Brand Ferromatik Year 1999 Condition Used Location Switzerland Machine Specifications Controller NA Clamping Force 110 Ton Screw Dia. 40 mm Machine Description This Ferromatik Milacron K110 S D0gzkm Injection pressure 2240 bar Distance between tie bar 470 x 470 mm Closing force 1100 kN injection molding machine was manufactured in 1999. Production hours 24'456. Mold opening stroke 550 mm Screw diameter 40 mm. Weight of the machine 5'500 kg
B&A REF: 8963 TON: 160 SHOT WEIGHT: 402 SCREW DIAMETER: 50MM STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X 770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 810MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 150MM CONTROLS: NC5 AIR VALVES: 1 CORE PULL: 1 SCREW DRIVE: HYDRAULIC
Key data: 1500 kN, 487 g/PS
Arburg 520A-1500-800 (207) General information Item number: 207 Availability: In stock Year of construction: 2007 Brand: Arburg Specifications Spray weight: 487 g Clamping force: 1,500 kN Stand: Used Screw diameter: 60 mm Spray pressure: 1390 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 700 x 700 mm Control: Selogica Power: 74 kW Operating hours: 63,600 h Weight: 7300 kg Dimensions: 6 m x 2.4 m Funnel: No
Key data: 3500 kN, 70 mm
warehouse no.: 503394 manufacturer: ENGEL type: ES 1800-350 HL controller: CC100 year of construction: 2004 operation hours: 69000 h clamping force: 3500 kN size of mould plates h x v: 1050 x 980 mm min. mould height: 350 mm max. open daylight: 1300 mm opening stroke: 950 mm screw diameter: 70 mm swept volume: 1039 ccm injection pressure: 1441 bar equipment included: screen text german machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine without material hopper Anti vibration mounts technical data robot-system: ENGEL ER-HLI 81 year of construction: 2004 measures of machine lxbxh: 7.98m x 2.22m x 2.57m total weight: 30750KG
Key data: 2500 kN, 50 mm
warehouse no.: 503409 manufacturer: ARBURG type: Allrounder 630 S 2500-800 controller: SELOGICA year of construction: 2012 operation hours: 38000 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm max. open daylight: 900 mm opening stroke: 600 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar measures of machine l x w x h: 5.8m x 2.85m x 2.21m total weight: 12200KG
Key data: 2100 kN, 45 mm
warehouse no.: 502923 manufacturer: BATTENFELD type: TM 2100-750+350V controller: UNILOG B4 year of construction: 2003 clamping force: 2100 kN distance between tie-bars h x v: 570 x 570 mm size of mould plates h x v: 840 x 840 mm min. mould height: 350 mm max. mould height: 700 mm max. open daylight: 1230 mm opening stroke: 530 mm horizontal injection unit: screw diameter: 45 mm swept volume: 358 ccm injection pressure: 2116 bar 2nd vertical injection unit: screw diameter: 35 mm swept volume: 169ccm injection pressure: 2083 bar equipment included: 8x control for hotrunner screen text german CEE-socket 16A core pulling hydraulically 1x core pulling hydraulically 3x air valve 1x machine incl. water flow regulator machine without material hopper needle shut-off-nozzle Anti vibration mounts electric interface for handling units according to Euromap 12 ...
Key data: 2100 kN, 45 mm
Stock No.: 502923 Manufacturer: BATTENFELD Type: TM 2100-750+350V Control: UNILOG B4 Year of construction: 2003 Clamping force: 2100 kN Holm h x w: 570 x 570 mm Plate size h x w: 840 x 840 mm Min. installation height: 350 mm Max. installation height: 700 mm Plate spacing max.: 1230 mm Aperture travel: 530 mm Screw diameter: 45 mm Displacement: 358 ccm Spray pressure: 2116 bar Equipment 8x temperature control unit for hot runner On-screen text German CEE socket 16A Core pull hydraulic 1x Core hoist hydraulic 3x Air valve 1x Machine with water battery Machine without material hopper Spring-loaded valve gate nozzle Levelling elements EUROMAP 12 interface EUROMAP 13 interface Schuko socket 10A Two-Component Injection Molding Machine Machine dimensions LxWxH: 5.7m x 1.5m x 3.97m Total Weight: 13900KG
Key data: 1500 kN
warehouse no.: 503061 manufacturer: DEMAG type: Ergotech system 150-610 controller: NC4 year of construction: 2004 operation hours: 63329 h clamping force: 1500 kN distance between tie-bars h x v: 500 x 500 mm size of mould plates h x v: 750 x 750 mm min. mould height: 250 mm max. mould height: 560 mm max. open daylight: 1060 mm opening stroke: 500 mm screw diameter: 45 mm swept volume: 323 ccm injection pressure: 1973 bar equipment included: Ejector parallel to the mould movement screen text german CEE-socket 16A pressure accumulator for uprated injection speed core pulling hydraulically 1x air valve 1x machine with material hopper machine without belt conveyor machine without hopper loader Anti vibration mounts Schuko-socket 10A choice unit measures of machine l x w x h: 5.45m x 1.63m x 2.1m total weight: 7500KG
Key data: 1300 kN, 40 mm
Stock No.: 503267 Manufacturer: KRAUSS MAFFEI Type: KM 130-380 CX Control: MC5 Year of construction: 2007 Hours: 48294 h Clamping force: 1300 kN Holm dimension v: 525 mm Holm h: 525 mm Plate size h: 820 mm Plate size v: 845 mm Min. installation height: 300 mm Plate dread max.: 900 mm Aperture travel: 600 mm Screw diameter: 40 mm Displacement: 201 ccm Spray pressure: 1860 bar Machine dimensions LxWxH: 5.7m x 1.6m x 2.1m Total Weight: 7800KG Equipment On-screen text German CEE socket 16A Core hoist hydraulic 2x Air valve 1x Air valve 2x Machine with water battery Machine without material hopper Machine without suction conveyor Levelling elements Interface EUROMAP 67 Interface for coloring device Selection Unit
Key data: 900 kN, 22 mm
warehouse no.: 503415 manufacturer: ENGEL type: VICTORY 80-90 tech controller: CC200 year of construction: 2009 operation hours: 70171 h clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 500 mm screw diameter: 22 mm swept volume: 38 ccm injection pressure: 2060 bar measures of machine l x w x h: 4.4m x 1.5m x 2m total weight: 6700KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A mould heating 4x
clamping force: 600 kNinjection volume: 144 cm³screw diameter: 35 mmplaten size: 570 x 570 mmclosing stroke: 500 mmCondition: usedSpecification: Horizontal injection moulding machineclamping unit:- Clamping force max.: 600 kN- clamping platens: 570 x 570 mm- clear column distance: 370 x 370 mm- Distance between the mould mounting platens: 750 mm- Mould installation height: 250 mm- Opening stroke max.: 500 mm- Ejector travel hyd. Ejector stroke: 175 mm- Ejector force max.: 40 kNInjection unit:- Screw diameter: 35 mm- Screw length: 20D- Screw stroke max.: 150 mm- Max. dosing volume: 144 cm³- Moulded part weight: 121 g- Injection pressure: 1,820 bar- Injection flow max.: 154 cm³/s- Screw peripheral speed: 57 m/min- ...
Key data: 800 kN, 35 mm
warehouse no.: 503232 manufacturer: KRAUSS MAFFEI type: KM 80-380 EX controller: MC5 year of construction: 2008 operation hours: 49673 h clamping force: 800 kN distance between tie-bars h x v: 520 x 420 mm size of mould plates h x v: 640 x 740 mm min. mould height: 300 mm max. open daylight: 790 mm screw diameter: 35 mm swept volume: 154 ccm injection pressure: 2429 bar equipment included: screen text german CEE-socket 16A air valve 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 interface USB Schuko-socket 10A mould heating 24x measures of machine l x w x h: 5.35m x 1.7m x 2m total weight: 6500KG
Nv. Num. : 7150 Type: ALLROUNDER 275 V 250 Producer: ARBURG Generated: Parameters: Clamping force: 250 kN Height of clamping plate: 150-250 mm Ejector stroke length: 225 mm Opening the mold: 375-475 mm
Sole injector Brand: Maingroup, model: SP345. 3-post extruder, year: 1994, monochrome, spindle: 66 mm Ø. ¿Listo para empezar? ¡Contacta con nosotros directamente! Envíanos un mensaje por WhatsApp al (+34) 647 590 257 o un email a info@gester.es para asesoría personalizada.
Wittman-Battenfeld injection machines 2 units 110tons and one 180t -BTT110 - BT110 - BT180
This Dr. Boy injection molding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. – Brand: Dr. Boy – Model: 80M – Year built: 1996 – Screw diameter: 42mm – Shot volume: 200 cm³ – Closing force: 80T – Working hours: 24,222
Haitian 1400 ton High Tonnage Year 2009 In production Can be inspected Availability Immediate
Key data: 3000 , 60
warehouse no.: 503393 manufacturer: KRAUSS MAFFEI type: KM 300-1400 CX year of construction: 2011 operation hours: 78454 h clamping force: 3000 kN distance between tie bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm opening stroke: 820 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2007 bar equipment included: screen text german CEE-socket 16A pressure accumulator for uprated injection speed Handling without safety fencing core pulling hydraulically 2x machine incl. Handling machine without material hopper Anti vibration mounts interface EUROMAP 67 interface for handling Schuko-socket 10A technical data robot-system handling type: Linear manufacture: Wittmann controller: W 833 year of construction: 2011 handling w ...
WILL NOT LAST Husky Hypet 300 P100/110 E100 year 2010 working hs approx 65.000 Condition In production Availability Immediate Auxiliaries Resin dryer with hopper and Mold dehumidifer Cavities 72 Mold YES 2925 water short 12g and 13g 3025 water long/milk 13g 14.5g 15.5g 17.5g ask for info and dont delay
ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...
Inv. Num. : 6743 Type: MTF 1500 300 Producer: Maplan Created: 1998 Parameters: Clamping force: 300 t
PLASTDECOR
