injection moulding machines used for sale (1,125)

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrication system sensor, clamping pins, pan and drive belts in the plasticising unit were replaced. In addition, both motors in the plastification unit were refurbished and a periodic column tension check was carried out with the GEFRAN strain gauge system. The FERROMATIK MILACRON EE155 injection moulding machine is the perfect choice for the mass production of plastic parts of different colours, shapes and sizes by injection moulding. The machine’s high-performance components significantly enhance any, even the most intensive, machining process. These include an electric drive, which, compared to a hydraulic drive, offer ...

Key data: 1600 , 55

warehouse no.: 503156 manufacturer: KRAUSS MAFFEI type: KM 160-1000 PX controller: MC6 year of construction: 2018 operation hours: 9585 h clamping force: 1600 kN distance between tie bars h:: 520 mm distance between tie bars v:: 470 mm size of mould plates h: 710 mm size of mould plates v: 660 mm min. mould height: 200 mm max. mould height: 500 mm opening stroke: 950 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included screen text german pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs air valve 2x machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 interface for temperature control units interface USB wear-resistant injection unit mould heating 24x measures of machine lxbxh: 6.7m x 1.6m x 2.3m  ...

Stock No.: 503007 Manufacturer: BATTENFELD Type: HM 10000-9200 Control: UNILOG B4 Year of construction: 2003 Operating hours: 67092 h Technical data closing page Clamping force: 10000 kN Holmass v: 1120 mm Holmass h: 1400 mm Panel size h: 1960 mm Panel size v: 1690 mm Installation height min.: 550 mm Installation height max.: 1020 mm plate pitch: 2120 mm Opening distance: 1100 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering movable plate D: 250 mm Centering fixed plate D: 315 mm Technical data spray side Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1632 bar Screw length: 22 l/d Screw stroke: 500 mm Screw speed: 130 min Screw torque: 11370 N Plasticizing current: 144 g/s PS Injection flow to the outside: 1144 g/s hp Number of heating zones: 8 Nozzle travel: 700 mm Dimensions & Weight Machine dimensions LxWxH: 11.6m x 2.9m x ...

Warehouse No.: 503240 manufacturer: ENGEL type: Victory 650-120 Tech EC200 A02 Year of Construction: 2008 Operation hours: 60000 h clamping force: 1200 kN Size of mould plates H x V: 740 x 680 mm Min. mould height: 300 mm Open Daylight: 800 mm Opening stroke: 500 mm Screw diameter: 45 mm SWEPT Volume: 318 cc Injection pressure: 1232 bar Equipment included: screen text english CEE-socket 16A Core Pulling Hydraulically 2x Air Valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface EUROMAP 67 Mould Heating 8x measures of machine LXWXH: 4.86m x 1.5m x 2.1m total weight: 7600KG

Stock No.: 503221 Manufacturer: BATTENFELD Type: TM 2700-3300 UNILOG B4 Year of construction: 2007 Clamping force: 2700 kN Holmass v x v: 630 x 630 mm Panel size h x v: 940 x 940 mm Installation height min.: 250 mm Installation height max.: 650 mm plate pitch max.: 1250 mm Opening distance: 600 mm Screw diameter: 75 mm Displacement: 1657 cc Spray pressure: 2087 bar Equipment: Screen text Dutch Core tension hydraulic 1x Air valve 1x Machine with water battery Machine without handling Machine without material hopper Machine without suction conveyor Levelling elements Interface EUROMAP 67 Machine dimensions LxWxH: 7.2m x 1.71m x 2.4m Total weight: 16000KG

(BEING NEGOTIATED) HUSKY HYPET AE 230 RSE 80D/80 + MOLD + AUX inc CHILLER OCT 2013 Mold : 14g x 48 (30mm neck for water) cavity (HUSKY) Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FASTEST DELIVERY MUST GO ASK FOR VIDEO WILL NOT LAST LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

Manufacturer: BATTENFELD Type: HM 1300-9200H-7700H-BM Control: UNILOG B4 Clamping force: 13000 kN Year of construction: 2005 Technical data closing page: Drive type: fully hydraulic Closing type: Full hydraulics Type: four-spar Clamping force: 13000 kN Tie bar size h: 1600 mm Tie bar size v: 1250 mm Panel size h: 2220 mm Panel size v: 1880 mm Installation height min: 1000 mm Installation height max: 1800 mm plate spacing max.: 3850 mm Opening distance: 2850 mm Ejector stroke: 350 mm Ejector force: 165 kN Centering movable plate D: 315 mm Centering fixed plate D: 315 mm Technical data spray side: Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1630 bar Screw length: 22 l/d Plasticizing current: 144 g/s PS The technical data of the 2nd injection unit are as follows: Injection unit II 7700 Screw diameter 100 mm, Specific spray pressure 1960 ...

Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of construction: 2007 Control: MC 4 Clamping unit: Clamping force: 650 t Opening distance: 1150 mm Tool installation height min.: 600 mm plate spacing : 1750 mm Tie bar distance (h x v): 1100 x 900 mm Panel dimensions (h x v): 1510 x 1370 mm Centering (nozzle ejector plate): 200 / 200 mm 1.Injection unit: Screw diameter : 80 mm Injection weight in hp. Max. : 1400 g Displacement: 1543 cc Injection pressure: 2205 bar 2. Injection unit: Screw diameter: 45 mm Injection weight in polystyrene: 278 g Displacement: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x Air valve 16-fold cascade 3 x core pull on BWAP 3 x core pull on FWAP 20 x hot runner control units Robot interface: Euromap 67 Metrics: Total weight: 34,500 kg Total size L x W x H: 7.8 x 2.5 x 2.5 m Operating hours: 45400 h  ...

warehouse no.: 503243 manufacturer: KRAUSS MAFFEI type: KM 250-1400 CX controller: MC5 year of construction: 2010 operation hours: 54872 h clamping force: 2500 kN distance between tie bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar measures of machine lxbxh: 6.1m x 2.2m x 2.3m total weight: 15000KG equipment included: screen text german CEE-socket 16A pressure accumulator for uprated injection speed Anti vibration mounts interface EUROMAP 67 wear-resistant injection unit

BEING NEGOTIATED Sumitomo Demag 280 ton Systec SP 280/630-840 year of manufacture 2014 280 Ton Clamp 2800kn Tie Bar Dist 630 Injection unit 840 Made in Schwaig, Germany 400v 50hz Exworks South America

Key data: 550 , 92 , 32

Manufacturer: Boy Type: 55 AVV Year of construction: 2012 Control: Procan ALPHA Clamping force: 550 kN Type of lock: Hydraulish Spar spacing: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance: 300 mm Plate spacing max.: 550 mm Screw: 32 mm Stroke volume: 96.5 ccm / 92.3 gram HP Injection pressure: 2127 bar General Motor: 11 kW Heating: 7,7 kW Dimensions: 3 m x 1.2 m x 3.7 m Weight: 2700 kg Screen text: German / English / French Additional equipment Robot interface

Key data: 550 , 92 , 32

Manufacturer: Boy Type: 55 MVV Year of construction: 2008 Control: Procan MD Clamping force: 550 kN Type of lock: Hydraulish Spar spacing: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance: 300 mm Plate spacing max.: 550 mm Screw: 32 mm Displacement: 96.5 cc Spray weight PS: 92.3 gram HP Spray pressure: 2127 bar General Motor: 11 kW Heating: 7,7 kW Dimensions: 3 m x 1.2 m x 3.7 m Weight: 2700 kg Screen text: German / English / French Additional equipment Robot interface

Key data: 500 , 77 , 30

Manufacturer: Krauss Maffei Type: 50 - 220 C Built: 2001 Control: MC4 Closing force: 500 kN Tie bar distance: 321 mm x 321 mm Plate size: 540 mm x 540 mm Tool installation height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 35 mm Lifting volume: 101 ccm / 92 gram HP Spray pressure: 1488 bar General Engine: 11 kW Heating: 9 kW Dimensions: 3.3 m x 1.3 m x 1.8 m Weight: 2500 kg Screen text: English / English Additional equipment Core pull x1 Air valve x1 Accu Hot runner control

Arburg 420C-1000-350 (174) with challenge tape Item number: 174 Availability: In stock Year of construction: 2001 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,000 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 89,240 h Weight: 3430 kg Dimensions: 4.4x1.7 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Netstal E-Jet for sale. Machine is functional. Year of construction 2004 Spray force 113 kN Clamping force 500 kN Opening distance 50 mm Tool installation height 195mm-515mm Degree of protection 54 IP Machine weight 4400 kG Detailed information and condition of the machine > see attached pictures If you have any further questions, please do not hesitate to contact us.

SANDRETTO MEGA T 4435/610 injection moulding machine (1998) 610 ton thermoplastic injection machine In working condition. Euromap 4435/610 Screw diameter: 21 Calculated injection volume: 2831cm3 Screw length (LD): 21 Maximum injection capacity: 746 cm3/1” Laminating capacity: 86 g/1” Pressure on material: 1548 bar Closing force: 610 tons. Variable displacement engine torque: 5570 Nm. Screw speed: 153 RPM Screw hydraulic motor power: 120 HP Injection group stroke: 725 mm. Heating zones: 4+nozzle. Total heating power: 38 kW. Mold locking force: 5985 kN Mold thickness min/max.: 300/1000 mm. Mobile plane stroke: 930 mm. Plate dimensions: 1270 x 1270 mm. Column passage: 850 x 850 mm. Column diameter: 160 mm. Extraction force: 103 kN Puller stroke: 350 Vacuum cycles: 10-11 n/1” Hydraulic circuit pressure: 160 bar Oil tank capacity: 850 l. Electric motor powe ...

Key data: 1000 , 89 , 30

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery und ...

Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021

Arburg 470S-1300-350 (170) Hybrid with electric worm drive, without funnel General information Item number: 170 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Spray weight: 127 g Clamping force: 1,300 kN Screw diameter: 35 mm Spray pressure: 2500 bar Spar spacing: 470 x 470 mm Clamping plate size: 650 x 650 mm Tool installation height min.: 275 mm Control: Selogica Language: German Power: 33.9 kW Operating hours: 85,400 h Weight: 5,100 kg Dimensions: 5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Arburg 470C-1500-350(166) General information Item number: 166 Availability: In stock Year of construction: 2003 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,500 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 470x470 mm Clamping plate size: 650x650 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 40.2 kW Operating hours: 83824 h Weight: 4410 kg Dimensions: 4.5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

Updated info 35.9 grams PCO1810 HUSKY Cold Half 96 Cavities Year 2005 (Made in Canada by Husky) 31.7 grams PCO1881 Short Neck MPET Core Set 96 cavities Year 2012 (Made in Canada by Master Pet) LOW WORKING HOURS

JUST SOLD HUSKY Hypet300 HPP5 P100/100 EE100E 18.000 preforms/h (PV 14,6gr) max. 72 cavities; screw diam. 100mm; max. screw speed 108rpm; stroke 400mm; max. melt pressure 25367psi; incl. viscosity monitor PTI; incl. Plastic Systems DM20L volumetric dosing unit (2018) and PS desiccant hopper MOQOP (2018) and temp. unit HPP5H300; incl. Plastic Systems DSH 3003-C-INT 5.0 coolpik mould dehumidifier; incl. Plastic Systems TB-SD300 double softdrop unloader; NO MOLD INCLUDED max. 400V/172A; total machine dim. L13000 x W4000 x H27500; own weight total 22t; meter reads 7.416/16,6mio pressings exworks EUROPE

screw size:30 mminjection shot weight in Polysterol:100 gclamping force:600 kNscrew size:30 mmmax. swept volumne:106 cm³injection shot weight in Polysterol:100 g/PSinjection pressure:2.750 barclosing pressure:60 ttie bar distance:370 x 370 mmmould hight - min.:160 mmopening stroke:350 mmmicroprocessor control:NC4 screen text:deutsch Manual:deutsch robot interface:Euromap 12 core pull:1 x without hopper / without water distributor:-/- pump drive power:5,5 kWtotal connection power:45,0 kWtotal weight:5.000 kg:4,6 x 1,5 x 2,0 mElectric dosing: 15 kWElectric clamping: 9,8 kWPayment: 100% prior to delivery

screw size:70 mmclamping force:3.500 - 5.000 kNscrew size:70 mmmax. swept volumne:1.155 cm³injection pressure:1.480/1.780 barInjection unit complete with hydraulic block and valves (available twice).The injection units were installed on an ES900WP combi! Payment terms: 100% prior to delivery

Demag Plastifiziereinheit SC Zylinder Ø50zu Demag Ergotech- IU 1450- Ø 50mm- Hubvolumen: 530 cm³- Einspritzdruck:- Spritzteilgewicht- Schnecke: Einzug: 49,50mm Ausstoß: 49,30mm RSP: 49,93mm- Zylinder: Einzug: 50,00mm Ausstoß: 50,00mm- Voll funktionsfähig- Aus laufender Maschine ausgebaut

Engel Victory 500/120 Tech (145) without funnel General information Item number: 145 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 231 g Clamping force: 1,200 kN Screw diameter: 40 mm Spray pressure: 1300(2020) bar Spar spacing: Tie barless Clamping plate size: 740 x 680 mm Control: CC200 Language: German Power: 41 kW Operating hours: 96830 h Weight: 7400 kg Dimensions: 5 x 1.7 m Funnel: No Core train: Yes Euromap: Yes

ALREADY SOLD MORE MACHINES COMING SOON BMB High Tonnage Injection Molding Machine 1000 Tons Model KW 1000 / 7500 Year of Manufacture 2000 Voltage 400 Frequency 50hz Availability, ready to load See pictures please

Arburg 520C-1300-350 (163) with bimetal plasticizing unit General information Item number: 163 Availability: In stock Year of construction: 1999 Brand: Arburg Specifications Spray weight: 194 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 520x520 mm Clamping plate size: 715x715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 95616 h Weight: 6380 kg Dimensions: 5.1x1.9 m Funnel: No Core train: Yes Euromap: Yes

Engel Victory 750/150 Tech (146) without funnel Item number: 146 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 354 g Clamping force: 1,500 kN Screw diameter: 50 mm Spray pressure: 1427(1909) bar Spar spacing: Tie barless mm Clamping plate size: 750 x 850 mm Control: CC200 Language: German Power: 61 kW Operating hours: 98108 h Weight: 9500 kg Dimensions: 5.7 x 2 m Funnel: No Core train: Yes Euromap: Yes