We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Alt kategori
(3. kategori seviyesi)
Üretici:
(kategori: 301)
kullanılmış
Inv. Num. : 7423 Type: ES 200/50 HL ST Producer: Engel Created: 1998 Parameters: Clamping force: 50 t Plate dimensions: 510x320 mm Injection weight: 4700 kg
kullanılmış
kullanılmış
Inv. Num. : 7418 Type: Concept 420/810-2300 Producer: Demag Created: 2006 Parameters: Clamping force: 420 t Screw diameter: 60 mm Injection capacity: 891 cm³ Injection mass: 800 g Height of the clamping plate: 1200 mm Width of clamping plate: 1100 mm Distance between uprights (horizontal): 800 mm Distance between uprights (vertical): 710 mm Maximum spraying pressure: 2420 bar Machine length: 7900 mm Machine width: 2200 mm Machine height: 2500 mm Injection weight: 20000 kg
kullanılmış
screw size:45 mminjection shot weight in Polysterol:149 g/PSclosing pressure:1250 kN
kullanılmış
Inv. Num. : 7218 Type: 80-380 CX Producer: Krauss Maffei Created: 2008 Parameters: Clamping force: 800 kN Screw diameter: 40 mm Injection capacity: 201 cm³ Injection mass: 183 g Height of the clamping plate: 670 mm Width of clamping plate: 670 mm Distance between uprights (horizontal): 420 mm Distance between uprights (vertical): 420 mm Opening the mold: 500 mm Injection weight: 3,900 kg
kullanılmış
Description: Without Multronica control left bar spacing 270mm, clamping force 35t, with upstream material feed for duroplast Device for asymmetrical injection (screw module adjustable to the side)Approx. Onsite Dimension. (l x w x h): 4,300 x 1,200 x 1,700 mm, weight approx.: 1,900 kg
kullanılmış
Inv. Num. : 7200 Type: VC 80/25 TECH Producer: Engel Created: 2007 Parameters: Clamping force: 25 t Panel dimensions: 470 x 280 mm Clamping force: 250 kN Screw diameter: 22 mm Machine length: 2720 mm Machine width: 1030 mm Machine height: 1760 mm Injection weight: 1800 kg
kullanılmış
Description: Injection molding machine ARBURG Hydronica U version, built in 1989 Locking pressure 350 kn Machine was bought without a Hydronica control. The control system that is now installed is therefore not original and has not been tested. Without documentsApprox. Onsite Dimension. (l x w x h): 3,300 x 1,400 x 1,800 mm, weight approx.: 1,900 kg
kullanılmış
Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)
kullanılmış
Description: Arburg Allrounder 221 Polytronica Drive Electric motor with hydraulic pumpApprox. Onsite Dimension. (l x w x h): 1,200 x 500 x 500 mm, weight approx.: 150 kg
kullanılmış
Inv. Num. : 7180 Type: ALLROUNDER 320 C 600 Producer: Arburg Created: 2008 Parameters: Distance between tie rods: 320x320 mm Clamping force: 500 kN Injection weight: 2300 kg
kullanılmış
Description: injection molding machine Screw diameter 30mm with device for spraying into the parting line funnel pipe for vertical injection without a funnel Documentary and discs monitor machineApprox. Onsite Dimension. (l x w x h): 3,200 x 1,400 x 1,600 mm, weight approx.: 1,800 kg
kullanılmış
Inv. Num. : 5851 Type: IS 280 GS Producer: TOSHIBA Created: 1996 Parameters: Operating hours: 24,593 h Total number of injections: 7,410,962 Clamping force: 2774 kN Screw diameter: 60 mm Injection capacity: 930 cc Injection mass: 855 g Min. height of the clamping plate: 900 mm Min. width of clamping plate: 900 mm Distance between uprights (horizontal): 610 mm Distance between uprights (vertical): 610 mm Ejection force: 152 kN Ejector stroke length: 760 mm Maximum Spray Pressure: 192 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1900 mm Machine height: 1900 mm Injection weight: 12400 kg
kullanılmış
Description: Injection molding machine Arburg 270-350-90 M the machine was to be overhauled in 2004. Floppy disk drive is broken and should be renewed. Floppy disks and drive were bought. However, the machine was taken out of operation for a new purchase and stored for years as a replacement machine. The drive was installed by us in 2022 and the disks were checked by Arburg. Transport damage to the traveler was to be repaired using spare parts. However, this was not implemented. The machine + replacement traveler are now being sold as spare parts carriers. It is also possible to set up the machine at extra costs. Discettes and documentation available.Approx. Onsite Dimension. (l x w x h): 4,000 x 1,400 x 1,800 mm, weight approx.: 1,900 kg
kullanılmış
Inv. Num. : 6298 Type: 1000-430 Producer: DEMAG Created: 1995 Parameters: Clamping force: 100 t Screw diameter: 40 mm Injection capacity: 231 cm³ Injection mass: 205 g Min. height of clamping plate: 580 mm Min. width of clamping plate: 590 mm Distance between uprights (horizontal): 400 mm Distance between uprights (vertical): 400 mm Opening the mold: 500 mm Machine length: 4200 mm Machine width: 1400 mm Machine height: 1900 mm Injection weight: 4200 kg
kullanılmış
Description: U-version can be pivoted horizontally/vertically can be used e.g. for inserts, Protective doors pneumatically operated. Before the machine was dismantled, it was run without heating up or spraying parts and the existing video was made. The flickering on the screen is only because of the frequency of the recording camera. Without funnel disc and documents. A copy of the operating instructions is available from another machineApprox. Onsite Dimension. (l x w x h): 2,700 x 1,400 x 1,700 mm, weight approx.: 1,200 kg
kullanılmış
Key data: 1000 kN
Inv. Num. : 7219 Type: 100-380 AX Producer: Krauss Maffei Created: 2010 Parameters: Clamping force: 1000 kN Screw diameter: 40 mm Injection capacity: 200 cc Distance between uprights (horizontal): 460 mm Distance between uprights (vertical): 410 mm Opening the mold: 350 mm Operating pressure: 1860 bar Machine length: 4950 mm Machine width: 1700 mm Machine height: 2000 mm Injection weight: 5150 kg
kullanılmış
Description: Injection unit: Screw diameter: 50 mm Shot weight: 343 G Stroke volume: 377 CCM cm³ Injection pressure: 1892 bar Plastification rate: 35 G/S Screw speed: 255 1/min Closing unit: Closing force: 1500 KN max. opening daylight: 1000 mm Bar spacing: 500 X 500 mm min. molding height: 400 mm Tool mounting platens: 780 X 790 mm Approx. Onsite Dimension. (l x w x h): 4,600 x 1,700 x 2,200 mm, weight approx.: 6,500 kg
kullanılmış
Inv. Num. : 7181 Type: ALLROUNDER 375 V 500 Producer: Arburg Created: 2012 Parameters: Duty cycle: 26913 h Hours: 17470 h Clamping force: 500 kN
kullanılmış
Description: Machine number: 44314 Operating voltage: 400 V Frequency: 50 Hz Rated current: 50 A Closing force: 50 toApprox. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 2,000 mm, weight approx.: 3,000 kg
kullanılmış
Nv. Num. : 7150 Type: ALLROUNDER 275 V 250 Producer: ARBURG Generated: Parameters: Clamping force: 250 kN Height of clamping plate: 150-250 mm Ejector stroke length: 225 mm Opening the mold: 375-475 mm
kullanılmış
Description: Machine number: 175808 Operating voltage: 400 V Frequency: 50 Hz Heating connection: 14.9 kW Pump motor: 30 kW Total connection: 44.9 kW Clamping force: 1600 kN Screw diameter: 50 Platen dimensions: 780 x 700 mmApprox. Onsite Dimension. (l x w x h): 5,000 x 1,800 x 2,100 mm, weight approx.: 6,600 kg
kullanılmış
Key data: 130000 kN, 194 g/PS, 45 mm
Clamping force: 130 t Year of construction: 1999 Injection weight in hp: 194 (hp) g Control type: Selogica Injection unit: .../350 Screw diameter: 45 mm Spec. Injection pressure: 1670 bar Spraying volume: 230 ccm Injection weight in hp: 194 (hp) g Hydr. Drive power: 22 kW L/D Screw Ratio: 18 Clamping unit: 1300/... Clamping force:: 130 t Size of clamping plates: 615 x 615 mm Lights spar spacing: 420 x 420 mm Ejector force: 40 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 175 mm General information: Fuel tank capacity OIL: 240 l Weight: 4100 kg Dimensions(m) LxWxH: 4.4 x 1.4 x 2.1 m
kullanılmış
Description: - machine no. 21117 - closing force 500 kN - pump motor 11 kW - voltage 400 V / 50 Hz - position-controlled screw - technology level 2 with two regulating pumps for controlled machine movement - plasticising cylinder 20 mm - highly wear and corrosion resistant, max. processing temperature 450° - max. injection volume 30 ccm - Piezo-charge amplifier for internal pressure measurement - programmable nozzle contact force - centering diameter of nozzle side 125 mm - ejector with quick-release coupling - ejector stroke max. 125 - mould height min. 300 - max. distance between plates 700 - distance between columns 370 x 370 - machine-related cooling circuits programmably controlled - 6 free cooling circuits manually adjustable - interface for tool monitoring via ejector plate security - blow-out device with pressure reducer - off-line filtration - temperature in the control cabinet ...
kullanılmış
Inv. Num. : 7019 Type: KM 125-520C1 Producer: Krauss Maffei Created: 2004 Parameters: Duty cycle: 4818 h Clamping force: 125 t Plate dimensions: 745x770 mm Injection weight: 6000 kg
kullanılmış
Description: clamping force: 350t daylight: 1250 minimum mold thickness: 300 - 650 tie bar spacing: (H x V) 810 x 710 platen size: (H x V) 1130 x 1030 clamp stroke: 600 ejector stroke: 200 ejector rod diameter: 28 mm screw diameter: 56 mm maximal injection volume: 640 ㎝³ maximum injection pressure: 225 MPa number ,of strokes approx. 3,500,000 number ,of injections is approx. 2,700,000 locating ring diameter (F:M) 160 hydraulic core (Fixed/Move) 0/0  , on switchboard picture are red marked modules that are missing in the machine machine was in operation before the cards were removed machine will be delivered with ,documentation, backup data not available, can be obtained from FANUC  , please also have a look at the PDF documents of this ,machine Approx. Onsite Dimension. (l x w x h): 8,000 x 2,750 x 2,000 mm, weight approx.: 14,600 kg
kullanılmış
Inv. Num. : 6582 Type: ES 330/65 Producer: ENGEL Produced: 1991 Parameters: Clamping force: 650 kN Screw diameter: 35 mm Injection capacity: 154 cm³ Height of the clamping plate: 570 mm Min. width of the clamping plate: 552 mm Distance between stands (horizontal): 405 mm Distance between stands (vertical): 345 mm Injection weight: 4000 kg
kullanılmış
Description: Serial number 93307538 Clamping force 350 Ton, 3500 kN , Distance between the tie bars (HxV) 530 x 530 mm , Mould size 200 x 650 mm Diameter 70 mm Shot volume, calculated injection 990 cm3 Material pressure 1.980 bar Opening stroke: 600 mm Volume injected: 1347 cm3 Material pressure: 1450 bars Screw diameter: 70 mm Heating power: 23 KW Min/max mold thickness: 200 - 650 mm Dimensions 8010 x 1400 x 2480 mm Weight 14500kg Approx. Onsite Dimension. (l x w x h): 8,010 x 1,400 x 2,480 mm, weight approx.: 14,500 kg
kullanılmış
Inv. Num. : 6315 Type: Allrounder 320 C 500 Producer: ARBURG Created: 2007 Parameters: Operating hours: 53.740 h Clamping force: 500 t Screw diameter: 30 mm Capacity oil container: 120 l Oil type: OPTIMA 32ZFP
kullanılmış
Description: operating hours: approx. 33489 hrs. 3axis robot IMM type: Thermoset IMM serial number: 199583 clamping force: 180 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 154 cm3 max. spec. injection pressure: 1595/2177 max. stroke opening: 1050 mm max. mould thickness: 1050 mm min. mould thickness: 300 mm tie bars distance horizontal (mm): without tie bars tie bars distance vertical (mm): without tie bars locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 180 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the PDF document of this machine Approx. Onsite Dimension. (l x w x h): 1,950 x 5,200 x 2,900 mm, weight approx.: 14,200 kg