The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944966
New in: 2003

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 400 kN

Arburg 1200T 400-150/ Vertical injection moulding machine with rotary table Year of construction: 2003 Injection unit: Screw diameter: 35 mm Spray weight: 89 g Spray pressure: 1620 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 40 t Tie bar spacing: 0x0 mm Size of clamping plates: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Turntable diameter: 1200 mm Air valve x 3 Hydraulic core pull x 3 Hot runner control x 6 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Parallel Movements Protective housings are opened automatically It is possible to change the screw diameter for fi 40 mm The machine has an additional control panel - control by remote control Original tool crane The machine was serviced by the authorised service company Arburg in Germany M ...

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162945012
New in: 2011

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 3200 kN

Arburg 1500T 3200-1300 e² / Hybrid machine with one turntable Year of construction: 2011 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Spray pressure: 2000 bar Dosing volume: 664 ccm Clamping unit: Clamping force: 320 t Tie bar spacing: 0x0 mm Size of clamping plates: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 3 Hot runner control x 13 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter Very precise turntable, driven by a servo motor, controlled by an inverter Turntable diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Sel ...

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 153733516

used

check Seller: PaGaPlast
Location: 93-408 Lodz Land-pl

add to watchlist

Manufacturer: Arburg Type: 220 S 250 - 60 Year of construction: 1999 Control: Selogica Closing type: Hydraulic Closing force: 250 kN Tie bar spacing: 220 mm x 220 mm Plate size: 400 mm x 400 mm Tool height: min 150 mm Opening distance: 275 mm Plate spacing max.: 425 mm Screw: 18 mm Lifting volume: 20 ccm / 17 gram PS Injection pressure: 2500 bar general Engine: 7.5 kW Heating: 4 kW Dimensions: 2.9 m x 1 m x 1.6 m Weight: 1900 kg Screen text: German Optional extras Robot interface Air valve Hot channel integrated

injection moulding machines / Plastic injection machines
date: 29.03.2023 add to watchlist
approved
dealer
item-No.: 153733522
New in: 2005

used

check Seller: PaGaPlast
Location: Land-pl
Price: 8.500 € add to watchlist

Manufacturer: Arburg Type: 221K 350 - 100 Year of construction: 09/2005 Control: Selogica Closing force: 350 kN Locking type: Knee lever Tie bar spacing: 221 mm Plate size: 324 mm x 250 mm Tool height: min 150 mm - 300 mm Opening distance: 200 mm Plate spacing max.: 350 mm - 500 mm Screw: 25 mm Stroke volume: 49 ccm / 41 gram PS Injection pressure: 2000 bar general Engine: 7.5 kW Heating: 4.6 kW Dimensions: 2.7 m x 1.4 m x 2.2 m Weight: 1200 kg Optional extras Core train x1 Hot channel integrated

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 153733503
New in: 2001

used

check Seller: PaGaPlast
Location: 93-408 Lodz Land-pl

add to watchlist

Manufacturer: Arburg Type: 221K 350 - 100 Year of construction: 2001 Control: Selogica Closing force: 350 kN Locking type: Knee lever Tie bar spacing: 221 mm Plate size: 324 mm x 250 mm Tool height: min 150 mm - 300 mm Opening distance: 200 mm Plate spacing max.: 350 mm - 500 mm Screw: 25 mm Stroke volume: 49 ccm / 41 gram PS Injection pressure: 2000 bar general Engine: 7.5 kW Heating: 4.5 kW Dimensions: 2.7 m x 1.4 m x 2.2 m Weight: 1150 kg

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944960
New in: 1999

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 250 kN

Arburg 221KS 250-75 / Universal machine Year of construction: 1999 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spraying pressure: 1500 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 25 t Tie bar spacing: 221 mm Size of clamping plates: 342x250 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core Pull Control Injection unit hardened - Bimetal Tension clamp for attaching the injection unit vertically Metrics: Weight: 1150 kg Length/Width/Height: 2.63x1.34x1.93 m Drive: Pumps/motor: 5.5 kW Heating capacity: 4.6 kW Total power: 10.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selec ...

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944962
New in: 1999

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 250 kN

Arburg 221KS 250-75 / Universal machine Year of construction: 1999 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Spraying pressure: 1500 bar Dosing volume: 49 ccm Clamping unit : Clamping force: 25 t Tie bar spacing: 221 mm Size of clamping plates: 342x250 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core Pull Control Injection unit hardened - Bimetal Tension clamp for attaching the injection unit vertically Metrics: Weight: 1150 kg Length/Width/Height: 2.63x1.34x1.93 m Drive: Pumps/motor: 5.5 kW Heating capacity: 4.6 kW Total power: 10.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selec ...

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 153733501
New in: 2001

used

check Seller: PaGaPlast
Location: 93-408 Lodz Land-pl

add to watchlist

Manufacturer: Arburg Type: 221KS 350 - 100 Year of construction: 2001 Control: Selogica Closing force: 350 kN Locking type: Knee lever Tie bar spacing: 221 mm Plate size: 324 mm x 250 mm Tool height: min 150 mm - 300 mm Opening distance: 200 mm Plate spacing max.: 350 mm - 500 mm Screw: 25 mm Stroke volume: 49 ccm / 41 gram PS Injection pressure: 2000 bar general Engine: 7.5 kW Heating: 4.5 kW Dimensions: 2.7 m x 1.4 m x 2.2 m Weight: 1150 kg Optional extras Robot interface

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 153733495
New in: 1998

used

check Seller: PaGaPlast
Location: 93-408 Lodz Land-pl

add to watchlist

Manufacturer: Arburg Type: 270 C 400 - 100 Year of construction: 1998 Control: Selogica Closing force: 400 kN Closing type: Hydraulic Tie bar spacing: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Stroke volume: 70 ccm / 64 gram HP Injection pressure: 1550 bar general Engine: 11 kW Heating: 5.9 kW Dimensions: 3.42 m x 1.5 m x 1.7m Weight: 1980 kg Screen text: German Additional equipment Core train: x1

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 147230603
New in: 2000

used

check Seller: PaGaPlast
Location: Land-pl

add to watchlist

Manufacturer: Arburg Type: 270C 400 - 100 Built: 2000 Control: Selogica Closing force: 400 kN Closing type: Hydraulic Tie bar distance: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool installation height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Lifting volume: 70 cc / 64 gram hp Spray pressure: 1550 bar General Engine: 11 kW Heating: 5.9 kW Dimensions: 3.42 m x 1.5 m x 1.7m Weight: 1980 kg Screen text: German Additional equipment Core train: x1 Robot interface

injection moulding machines / Plastic injection machines
date: 07.02.2024 add to watchlist
approved
dealer
item-No.: 160432736
New in: 2001

used

check Seller: ETAP-Development and engenering
Location: 8000 Novo mesto Land-si

add to watchlist

ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 153733511
New in: 1997

used

check Seller: PaGaPlast
Location: Land-pl

add to watchlist

Manufacturer: Arburg Type: 270 S 250 - 150 Year of construction: 1997 Control: Selogica Closing type: Hydraulic Closing force: 250 kN Tie bar spacing: 270 mm x 270 mm Plate size: 400 mm x 400 mm Tool height: min 200 mm Opening distance: 275 mm Plate spacing max.: 475 mm Screw: 25 mm Lifting volume: 54 ccm / 45 gram PS Injection pressure: 2500 bar general Engine: 11 kW Heating: 4.8 kW Dimensions: 3.2 m x 1 m x 1.6 m Weight: 2100 kg Screen text: German Optional extras Core train x2 Robot interface Air valve Sorting flap

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 153733514
New in: 1997

used

check Seller: PaGaPlast
Location: Land-pl
Price: 5.000 € add to watchlist

Manufacturer: Arburg Type: 270 S 250 - 60 Year of construction: 1997 Control: Selogica Closing type: Hydraulic Closing force: 250 kN Tie bar spacing: 270 mm x 270 mm Plate size: 400 mm x 400 mm Tool height: min 200 mm Opening distance: 275 mm Plate spacing max.: 475 mm Screw: 25 mm Stroke volume: 39 ccm / 33 gram HP Injection pressure: 1800 bar general Engine: 7.5 kW Heating: 2.7 kW Dimensions: 3.2 m x 1 m x 1.6 m Weight: 1900 kg Screen text: German Optional extras Picker Gaiger Robot interface Air valve

injection moulding machines / Plastic injection machines
date: 22.02.2024 add to watchlist
approved
dealer
item-No.: 163244214
New in: 2006

used

check Seller: Maschinenhandel Kmet
Location: Land-hu

add to watchlist

Key data: 400 kN, 21 g/PS, 18 mm

Arburg 270 U 400-70 Year of construction: 5/2006 Clamping force: 40 tons. Screw diameter: 18 mm Operating hours: 36000 h additionally 2 Regloplas temperature control units + dryer feeder Fasti

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944969
New in: 2007

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 400 kN

Arburg 270C 400-70 with the Wittmann W702 sprue picker Year of construction: 11/2007 270C 400-70 Injection unit: Screw diameter: 22 mm Spray weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap Sprue Picker Wittmann W702 Year of construction: 2014 Travels in axes: X-100, Z-90° Touch control panel Purchase of the sprue picker for an extra charge Metrics: Weight: 2370 kg Length/Width/Height: 2.99x1.43x1.98 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.2 kW To ...

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944971
New in: 1998

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 500 kN

Arburg 270C 500-100 Year of construction: 1998 Injection unit: Screw diameter: 20 mm Injection weight: 26 g Injection pressure: 2500 bar Dosing volume: 31 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 270x270 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Operating hours: approx. 50,000 h Euromap 12 Robot Interface Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal The machine has an additional control panel - control by remote control The machine was regularly serviced by Arburg's authorised service Metrics: Weight: 2200 kg Length/Width/Height: 3.42x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.3 kW Total power: 21.3 kW All offered machines are started by our service technicians before they are sold. It is possib ...

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944964
New in: 2001

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 250 kN

Arburg 270S 250-60 U / Universal machine Year of construction: 2001 Injection unit: Screw diameter: 18 mm Injection weight: 17 g Injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 25 t Tie bar spacing: 270x270 mm Size of clamping plates: 400x400 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Universal machine, injection unit and clamping unit can work horizontally or vertically Air valve x 2 Core Pull Control Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Metrics: Weight: 2100 kg Length/Width/Height: 2.89x1.11x1.85 m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.7 kW Total power: 10.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video ...

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944968
New in: 2008

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 400 kN

Arburg 270S 400-70 / Very good technical condition Year of construction: 2008 Injection unit: Screw diameter: 22 mm Spray weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit : Clamping force: 40 t Tie bar spacing: 270x270 mm Size of clamping plates: 380x380 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 6 Injection unit hardened - Bimetal Built-in conveyor belt and sorting flap Metrics: Weight: 2040 kg Length/Width/Height: 3.35x1.24x1.83 m Drive: Pumps/motor: 11 kW Heating capacity: 4.1 kW Total power: 15.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participa ...

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 153733527
New in: 2006

used

check Seller: PaGaPlast
Location: 93-408 Lodz Land-pl

add to watchlist

Manufacturer: Arburg Type: 320 C 500 - 170 Year of construction: 11/2006 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 35 mm Lifting volume: 115 ccm / 105 gram PS Injection pressure: 1470 bar general Engine: 11 kW Heating: 9.4 kW Dimensions: 3.4 m x 1.4 m x 1.9 m Weight: 2430 kg Screen text: German Additional equipment Core train x1

injection moulding machines / Plastic injection machines
date: 11.01.2024 add to watchlist
item-No.: 163127099
New in: 2007

used

Seller: PIMM-used
Location: 52-40 Wroclaw Land-pl

add to watchlist

Arburg 320 C 500-270 injection moulding machine Year of production: 2007 Control type: Selogica Clamping System: Hydraulic TECHNICAL DATA Closing force: 500 kN Clearance between columns: 320 mm x 320 mm Plate dimensions: 446 mm x 446 mm Mould size: min. 200 mm Maximum opening distance: 350 mm Max distance between plates: 550 mm Screw diameter: 35 mm Injection Volume / Injection Weight: 115 ccm / 105 gram PS Injection pressure: 1470 bar GENERAL DATA Motor: 11KW Heaters: 9.5 kW Dimensions L x W x H: 3.9 m x 1.4 m x 1.9 m Weight: 2400 kg

injection moulding machines / Plastic injection machines
date: 10.05.2023 add to watchlist
approved
dealer
item-No.: 153733490
New in: 2003

used

check Seller: PaGaPlast
Location: Land-pl
Price: 7.500 € add to watchlist

Manufacturer: Arburg Type: 320 C 600 - 250 Year of construction: 2003 Control: Selogica Closing type: Hydraulic Closing force: 600 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 2470 bar general Engine: 15 kW Heating: 5.5 kW Dimensions: 3.4 m x 1.5 m x 1.6 m Weight: 2080 kg Screen text: German Optional extras Core train x1 Robot interface Sorting flap Hot channel integrated

injection moulding machines / Plastic injection machines
date: 11.10.2023 add to watchlist
approved
dealer
item-No.: 153733528
New in: 2001

used

check Seller: PaGaPlast
Location: 93-408 Lodz Land-pl

add to watchlist

Manufacturer: Arburg Type: 320 KS 700 - 250 Year of construction: 2001 Control: Selogica Locking type: Knee lever Closing force: 700 kN Tie bar spacing: 320 mm x 320 mm Plate size: 476 mm x 476 mm Tool height: min 200 mm max 400 mm Opening distance: 250 mm Plate spacing max.: 650 mm Screw: 35 mm Stroke volume: 144 ccm / 121 gram PS Injection pressure: 1820 bar general Engine: 15 kW Heating: 6.1 kW Dimensions: 3.3 m 1.45 m x 1.6 m Weight: 2190 kg Screen text: German Optional extras Robot interface funnel

injection moulding machines / Plastic injection machines
date: 08.12.2023 add to watchlist
approved
dealer
item-No.: 162924891
New in: 1991

used

check Seller: Maschinenhandel Kmet
Location: Land-de

add to watchlist

Key data: 850 kN, 89 g/PS, 30 mm

Built in 1991 Clamping force: 85 tons. Screw diameter: 30 mm

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944972
New in: 2005

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 500 kN

Arburg 320A 500-170 with the sprue picker / electric machine Year of construction: 2005 Injection unit: Screw diameter: 35 mm Spray weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Injection unit hardened - Bimetal Central lubrication Machine with built-in Arburg conveyor belt and original sorting flap Metrics: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the select ...

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944975
New in: 2006

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 500 kN

Arburg 320C 500-170 with the Wittmann WP80 sprue picker Year of construction: 2006 Injection unit: Screw diameter: 30 mm Spray weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection A new injection unit is installed in the machine Built-in conveyor belt and sorting flap Sprue Picker Wittmann WP80 Year of construction: 2016 Travels in axes: X-100, Y-550, Z-90° Touch control panel Purchase of the sprue picker for an extra charge Metrics: Weight: 2400 kg Length/Width/Height: 3.41x1. ...

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944976
New in: 2006

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 500 kN

Arburg 320C 500-170 with the Wittmann W811 robot Year of construction: 12/2006 Injection unit: Screw diameter: 30 mm Spray weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap Robot Wittmann W811 Year of construction: 2010 4-axis robots: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot at an additional co ...

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944981
New in: 2001

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 600 kN

ARBURG 320C 600-250 / Machine in very good technical condition Year of construction: 2001 Injection unit: Screw diameter: 35 mm Spray weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 60 t Tie bar spacing: 320x320 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine Has Produced Molded Parts For Medical Industry - Pure Production Conditions Core Pull Control Injection unit hardened - Bimetal Built-in sorting flap Metrics: Weight: 2330 kg Length/Width/Height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected  ...

injection moulding machines / Plastic injection machines
date: 29.09.2023 add to watchlist
approved
dealer
item-No.: 162504982
New in: 1998

used

checkTOP Seller: SWISSBID IBS MACHINES AG
Location: 77716 Haslach Land-de

add to watchlist

Key data: 500 kN, 45 g/PS, 25 mm

1,0 St. gebr. Injection molding machine Manufacturer: ARBURG Type: 320SC500-250 Year of construction: 1998 Clamping force: 50 tons Tie bar spacing 320 x 320 mm Screws DN: 25 mm Moulded part weight 45 g/hp Control: SELGOCIA Equipment: -1 x Core pull -Interface robot -ASL module -Prepared for injection into the separation plane

injection moulding machines / Plastic injection machines
date: 29.09.2023 add to watchlist
approved
dealer
item-No.: 162504985
New in: 2000

used

checkTOP Seller: SWISSBID IBS MACHINES AG
Location: 77716 Haslach Land-de

add to watchlist

Key data: 500 kN, 45 g/PS, 25 mm

1,0 St. gebr. Injection molding machine with robot Manufacturer: ARBURG Type: 320SC500-100 Year of construction: 2000 Clamping force: 50 tons Tie bar spacing 320 x 320 mm Screws DN: 25 mm Moulded part weight 45 g/hp Control: SELGOCIA Equipment: -1 x Core pull -Robot, manufacturer: Geiger, Mini Liner 3.0, year 2013 -Guarding -Conveyor belt -ASL module

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944985
New in: 2005

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 700 kN

Arburg 320K 700-250 with the Arburg Multilift H lateral robot Year of construction: 2005 Injection unit: Screw diameter: 40 mm Spray weight: 158 g Spray pressure: 1390 bar Dosing volume: 188 ccm Clamping unit : Clamping force: 70 t Tie bar spacing: 320x320 mm Size of clamping plates: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Air valve x 3 Control with hot runners Injection unit hardened - Bimetal Central lubrication Metrics: Weight: 2350 kg Length/Width/Height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating capacity: 6.1 kW Total power: 21.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On req ...

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 136334198
New in: 1998

used

check Seller: PaGaPlast
Location: 93320 Lodz, Sarmacka 8/25 Land-pl

add to watchlist

Manufacturer/Manufacturer: Arburg Typ/Type: 320S 500-350 Bau-year year: 1998 Control/Controller: Selogica Clothing Power/Clamping Force: 500 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 320 mm x 320 mm Plate Groesse/Platen Size: 446 mm x 446 mm WZ Einbauhoehe/Mould hight: min 225 mm Oeffning weg/opening stroke: 350 mm Plate distance max/Max. Open Daylight: 575 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 182 cm/153 gram hp Spez. Spray./injection pressure: 2050 bar General General Motor/Motor Power: 18.5 kW Heating/heating power: 6.3 kW Dimensions: 3.7 m x 1.2 m x 2.1 m Weicht/Weight: 2600 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Euromap Rdzenie x1

injection moulding machines / Plastic injection machines
date: 11.01.2024 add to watchlist
item-No.: 163127101
New in: 2002

used

Seller: PIMM-used
Location: 52-40 Wroc?aw Land-pl

add to watchlist

Closure method Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 472 x 472 Clearance between columns (hxv) [mm] 320 x 320 Min./ max. mould height [mm] min 225 Maximum opening width [mm] 575 Injection Unit Screw diameter [mm] 30 Injection volume [cm3] 78 Injection weight [g] 71 Injection pressure [bar] 2210 Electrical-hydraulic equipment Pump motor rated power [kW] 15 Heater power [kW] 8,4 Dimensions & Weight Net weight with control cabinet [t] 2.25 t

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 136334140
New in: 1999

used

check Seller: PaGaPlast
Location: Land-pl

add to watchlist

Manufacturer/Manufacturer: Arburg Type/Type: 370C 600-250 Bau-year year: 1999 Control/Controller: Selogica Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 370 mm x 370 mm Plate Groesse/Platen Size: 570 mm x 570 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 188 cc/158 gram hp Spez. Spray./injection pressure: 1900 bar General General Motor/Motor Power: 11 kW Heating/heating power: 8.1 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weichtt/Weight: 3180 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 153733550
New in: 2001

used

check Seller: PaGaPlast
Location: 93-408 Lodz Land-pl

add to watchlist

Manufacturer: Arburg Type: 370 C 800 - 350 Year of construction: 2001 Control: Selogica Closing type: Hydraulish Closing force: 800 kN Tie bar spacing: 370 mm x 370 mm Plate size: 570 mm x 570 mm Tool height: min.250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 40 mm Lifting volume: 188 ccm / 172 gram PS Injection pressure: 2120 bar general Engine: 18.5 kW Heating: 10,2 kW Dimensions: 4.3 m 1.7 m 1.8 m Weight: 3430 kg Screen text: German Optional extras Core train: x1 Robot interface

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944983
New in: 2012

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 600 kN

Arburg 370A 600-170 / Electric machine Year of construction: 2012 Injection unit: Screw diameter: 35 mm Spray weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 60 t Tie bar spacing: 370x370 mm Size of clamping plates: 510x510 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot Interface Control with air valve Core Pull Control Control with hot runners Injection unit hardened - Bimetal Central lubrication Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Machine with an original sorting flap Injection unit with mechanism for quick exchange of the screw with the cylinder Original Arburg moulding crane, 2 lifting speeds, lifting capacity 400 kg The m ...

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944980
New in: 1995

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 600 kN

Arburg 370C 600-100 Year of construction: 1995 Injection unit: Screw diameter: 30 mm Spray weight: 59 g Spray pressure: 1550 bar Dosing volume: 70 ccm Clamping unit: Clamping force: 60 t Tie bar spacing: 370x370 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: DIALOGICA Additional equipment: Air valve x 1 Hydraulic core pull x 2 Metrics: Weight: 3600 kg Length/Width/Height: 4.30x1.59x2.08 m Drive: Pumps/motor: 11 kW Heating capacity: 4.2 kW Total power: 15.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 136334146
New in: 2000

used

check Seller: PaGaPlast
Location: 93320 Lodz, Sarmacka 8/25 Land-pl

add to watchlist

Manufacturer/Manufacturer: Arburg Type/Type: 370C 600-250 Bau-year/Year: 2000 Control/Controller: Selogica Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 370 mm x 370 mm Plate Groesse/Platen Size: 570 mm x 570 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 188 cc/158 gram hp Spez. Spray./injection pressure: 1900 bar General General Motor/Motor Power: 11 kW Heating/heating power: 8.1 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weichtt/Weight: 3180 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944979
New in: 1993

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 600 kN

Arburg 370M 600-200 Year of construction: 1993 Injection unit: Screw diameter:35 mm Spray weight: 121 g Spraying pressure: 1500 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 60 t Tie bar spacing: 370x370 mm Size of clamping plates: 545x545 mm Ejector: hydraulic Clamping unit: hydraulic Control: MULTRONICA Additional equipment: Metrics: Weight: 3080 kg Length/Width/Height: 4.30x1.85x1.60 m Drive: Pumps/motor: 11 kW Heating capacity: 5.5 kW Total power: 16.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944990
New in: 2000

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 800 kN

Arburg 370S 800-350 Year of construction: 2000 Injection unit: Screw diameter: 35 mm Spray weight: 117 g Injection pressure: 2500 bar Dosing volume: 139 ccm Clamping unit : Clamping force: 80 t Tie bar spacing: 370x370 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap Robot Interface Hydraulic core pull x 2 Injection unit hardened - Bimetal Built-in sorting flap Integrated original Arburg sprue picker on the side Metrics: Weight: 3800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company i ...

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944974
New in: 2012

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 500 kN

Arburg 375V 500-100 / Vertical injection moulding machine with rotary table Year of construction: 05.2012 Injection unit: Screw diameter: 20 mm Spray weight: 29 g Injection pressure: 2500 bar Dosing volume: 31 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 0x0 mm Size of clamping plates: 504x424 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Tie-bar-less machine Operating hours: 30,000 h in automatic mode Hydraulic core pull x 1 Hot runner control x 6 Injection unit hardened - Bimetal Turntable diameter: 900 mm Self-closing nozzle Built-in quality control system Infrared Protective Curtains Metrics: Weight: 3380 kg Length/Width/Height: 2.52x1.47x3.25 m Drive: Pumps/motor: 18 kW Heating capacity: 4.9 kW Total power: 22.9 kW All offered machines are st ...

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944973
New in: 2011

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 500 kN

Arburg 375V 500-290 / Vertical injection moulding machine / Operating hours: 12,751 in automatic mode / Very good technical condition Year of construction: 2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit : Clamping force: 50 t Tie bar spacing: 0x0 mm Size of clamping plates: 420x500 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Tie-bar-less machine Operating hours: 12,751 in automatic mode Air valve x 3 Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Self-closing nozzle Protective housings are opened automatically Metrics: Weight: 3400 kg Length/Width/Height: 2.55x1.63x3.52 m Drive: Pumps/motor: 12 kW Heating capacity: 5.8 kW Total power: 17. ...

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 153733551
New in: 2007

used

check Seller: PaGaPlast
Location: 93-408 Lodz Land-pl

add to watchlist

Manufacturer: Arburg Type: 420 C 1000 - 270 Year of construction: 2007 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar spacing: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 35 mm Stroke volume: 144 ccm / 132 gram PS Injection pressure: 2000 bar general Engine: 15 kW Heating: 6.4 kW Dimensions: 4.3 m x 1.6 m x 2 m Weight: 3880 kg Screen text: German Optional extras Core train x1 Robot interface

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 147230626
New in: 1999

used

check Seller: PaGaPlast
Location: 93320 Lodz Land-pl

add to watchlist

Manufacturer: Arburg Type: 420 C 1000 - 350 Built: 1999 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool installation height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 45 mm Lifting volume: 230 cc / 194 gram PS Spray pressure: 1670 bar General Engine: 22 kW Heating: 8.8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 3430 kg Screen text: German

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 123656822
New in: 2006

used

check Seller: PaGaPlast
Location: Land-pl

add to watchlist

Manufacturer/manufacturer: Arburg Typ/type: 420 C 1300-350 Year/year: 2008 Control/controller: Selogica Clamping force/clamping force: to 130 Holmabstand/Dist.Betw.Tiebars: 420 x 420 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 45 mm Stroke volume/shot volume: 230 ccm spec. Spritzdr / injection pressure: 1670 bar General / General engine power: 22 kW Heating/heating power: 8 kW Dimensions/dimensions: 4.3 m x 1.6 m x 1.8 m Weight/weight: 4300 kg

injection moulding machines / Plastic injection machines
date: 11.10.2023 add to watchlist
approved
dealer
item-No.: 147230627
New in: 2000

used

check Seller: PaGaPlast
Location: Land-pl

add to watchlist

Manufacturer: Arburg Type: 420C 1300 - 350 Built: 2000 Control: Selogica Closing type: Hydraulic Closing force: 1300 kN Tie bar ratio: 420 mm x 420 mm Plate size: 605 mm x 605 mm Tool installation height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 40 mm Lifting volume: 182 cc / 166 gram PS Spray pressure: 2120 bar General Engine: 22 kW Heating: 8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 4080 kg Screen text: German Optional extras Robot interface Core pull x2

injection moulding machines / Plastic injection machines
date: 08.12.2023 add to watchlist
approved
dealer
item-No.: 162924890
New in: 2001

used

check Seller: Maschinenhandel Kmet
Location: Land-de

add to watchlist

Key data: 1500 kN, 232 g/PS, 45 mm

Year of construction: 2001 Clamping force: 150 tons. Screw diameter: 45 mm Pump hours: 70412 h

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 153801267
New in: 1999

used

check Seller: PaGaPlast
Location: Land-pl

add to watchlist

Manufacturer: Arburg Type: 420 S 800 - 350 Year of construction: 1999 Control: Selogica Closing type: Hydraulish Closing force: 800 kN Tie bar spacing: 420 mm x 420 mm Plate size: 638 mm x 638 mm Tool height: min.250 mm Opening distance: 450 mm Plate spacing max.: 600 mm Screw: 45 mm Lifting volume: 230 ccm / 194 gram PS Injection pressure: 1600 bar general Engine: 18.5 kW Heating: 10,2 kW Dimensions: 4.3 m 1.7 m 1.8 m Weight: 3800 kg Screen text: German Optional extras Core train: x1

injection moulding machines / Plastic injection machines
date: 03.02.2023 add to watchlist
approved
dealer
item-No.: 135106023
New in: 1999

used

check Seller: PaGaPlast
Location: 93320 Lodz, Sarmacka 8/25 Land-pl

add to watchlist

Manufacturer/manufacturer: Arburg Typ/type: 420C 1300-250 Year/year: 1999 Control/controller: Selogica Clamping force/clamping force: 1000 kN Holmabstand/Dist.Betw.Tiebars: 420 x 420 mm Disk size/platen size: 605 x 605 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 35 mm Stroke volume/shot volume: 144 CC / 132 gram PS spec. Spritzdr / injection pressure: 1820 bar General / General Engine power: 18.5 kW Heating/heating power: 6,5 kW Dimensions/dimensions: 4.3 m x 1.7 m x 1.8 m Weight/weight: 3180 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 1 Robot

injection moulding machines / Plastic injection machines
date: 11.01.2024 add to watchlist
item-No.: 163127108
New in: 2000

used

Seller: PIMM-used
Location: 52-40 Wroc?aw Land-pl

add to watchlist

Clamping unit Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 605 x 605 Clearance between columns (hxv) [mm] 420 x 420 Maximum opening width [mm] 750 Injection Unit Screw diameter [mm] 35 Injection volume [cm3] 144 Injection weight [g] 132 Injection pressure [bar] 1820 Electrical-hydraulic equipment Pump motor rated power [kW] 18.5 Heater power [kW]: 6.5 Dimensions & Weight Net weight with control cabinet [t] 3.18 Dimensions (LxWxH) [m] 4.3 x 1.7x 1.8

injection moulding machines / Plastic injection machines
date: 28.02.2024 add to watchlist
approved
dealer
item-No.: 162944995
New in: 2007

used

checkTOP Seller: Szczep-pol s.c.
Location: 91212 Lodz Land-pl

add to watchlist

Key data: 1000 kN

Arburg 420C 1000-290 with the Geiger MiniServo 0.5 sprue picker Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 172 g Spraying pressure: 1530 bar Dosing volume: 188 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap It is possible to change the screw diameter The machine was regularly serviced by Arburg's authorised service Metrics: Weight: 3740 kg Length/Width/Height: 4.14x1.63x2.07 m Drive: Pumps/motor: 15 kW Heating capacity: 6.4 kW Total power: 21.4 kW All offered machines are st ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information