subcategories
(3rd category level)
Manufacturer:
(Category: 706)
Shrink packer Kettner with oven Stereung Siemens S7 Available immediately
Shrink packer Kettner with oven Stereung Siemens S7 Available immediately
Overview The filling line for gable top packaging was manufactured in 2008 by the Norwegian company Elopak. It consists of a carton filler, cap applicator, and packer. The filling line is still installed, but no longer connected. However, it can be inspected in person. Technical Details Capacity: 8,000 cartons/ h Formats: 0,5l 0,75l 1,0l Operating hours: 32,500 Scope of Delivery Aseptic Carton Filler | Elopak | S-PS80HA | 2008 3x Cap Applicator | Elopak | PLA-S30 | 2009 Tray Packer | OYSTAR A+F | Traypacker TF | 2011
Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained. Technical details Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm Weight: 15 t Operating hours: 44.736 Bottles Volume: 200 ml - 2000 ml Max. Diameter: 115 mm Max. Length: 350 mm Preforms Length: 60 - 200 mm Max. Support ring diameter: 35 mm Scope of delivery Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)
Overview This sleeve labelling and shrinking system was manufactured in 2017 by Germany Krones. The system consists of a Krones Sleevematic sleeve applicator and a Krones Shrinkmat shrink tunnel, designed for the application and shrinking of sleeve labels on bottles and containers of various formats. Technical data Formats: Various bottle and container formats Application: Sleeve labelling and sleeve shrinking Configuration: Krones Sleevematic sleeve applicator + Krones Shrinkmat shrink tunnel Labelling technology: Sleeve labels Scope of Delivery Sleeve applicator | Krones | Sleevematic | 2017 | Sleeve label application machine Shrink tunnel | Krones | Shrinkmat | 2017 | Sleeve shrinking system
Overview This can filling and seaming machine was manufactured in 2013 by CFT. The system consists of a CFT Mastercan Tronic RS 40/6 filler combined with a CFT Seamer 3000/6 and a lid feeder from CIMA. The machine is designed for beer filling in aluminium cans. The machine is currently in operation and will remain in operation until mid July 2026. Technical data Capacity: up to 20,000 cans/hour Formats: 0.33 l / 0.5 l aluminium cans Application: Beer filling Configuration: Can filler RS 40/6 with seamer 3000/6, lid feeder Lid type: 202 Scope of Delivery Can filler | CFT | Mastercan Tronic RS 40/6 | 2013 | Filling for aluminium cans Can seamer | CFT | 3000/6 | 2013 | Integrated can seaming unit Lid feeder | CIMA | - | 2013 | Lid feeding system
Rinser: 24 valvesFiller: 24 valvesScrew Capper: 4 headsBottle format: Diameter 46?mmCap format: 22?30?mm closure head
Overview This oil separator was manufactured in 2009 by the German company Donaldson Filtration GmbH. The UFA-AC0016M model was part of a compressed air installation operating with two Atlas Copco GA132 VSD low-pressure compressors. The unit is still installed and connected, has been maintained regularly, with the latest maintenance completed in August 2025, and is immediately available for sale. It can be visited on request. Technical data Air operating pressure: 5.5 – 8.5 bar Water operating pressure: 3 – 5 bar Condensate operating pressure: up to 10 bar Operating temperature: 4 – 70 °C
Overview This tray packer was manufactured in 2012 by the german manufacturer MEYPACK. It is already dismantled and stored in the BEVMAQ warehouses. The conveyor system is not included, the inlet and tray magazine are included. Technical data type: VP500 year of manufacture: 2012 Total output: 20 cycles/min length 8000 mm | width 1600 mm | infeed and outfeed height: 1250 mm packaging data: length: 100-300 mm width: 200-450 mm height: 60-350 mm height of tray edging: 40-100 mm pre-cut: length: 200-500 mm width: 290-600 mm power: 400V,N,PE | 10kW/33A | air: 6-7 bar | 20 NL/cycle
Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational. Technical Data Capacity: 14.000 bph Filling product: carbonated water and soft drinks OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm) condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010 ...
Overview This roll-fed hot glue labelling machine was manufactured by ACMI (Italy). The Opera PRO 400 RF is designed for high-capacity beverage production lines, processing both cylindrical and shaped containers in glass or PET. It applies wrap-around OPP labels at very high speeds, ensuring excellent efficiency and reliability. The machine is equipped with modern features such as automatic label splicing, brushless motor-driven infeed screws, and remote assistance capability. It is currently available for sale. Technical data Capacity: Nominal 48,000 bph (max. mechanical speed: 58,000 bph) Formats: Cylindrical and shaped containers, PET or glass, e.g. 500 ml PET round bottle (wrap-around OPP label) Machine diameter: 1,320 mm Pitch: 125.60 mm Label type: Roll-fed OPP hot glue wrap-around labels (30–40 µm thickness, 30–175 mm height) Platform rotation: Motorized belt (R version) Ma ...
Overview The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data Total output: 70 cycles/min electrical connection: 400V/N/PE/50Hz, 3,6kW Two lanes Additional information best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) conveyor for packages available
Palletizing portal for loading and depalletizing 20x0.5 crates, Euro pallet incl. pallet loading and unloading, pallet transport and container transport very good condition Output approx. 10-12 thousand bottles per hour
- In stainless steel - Standing on feet - Material: 1.4301 / AISI 304 - Content: approx. 5,000 litres Equipment: - Square manhole - Residual drain, ball valve NW 40 - Clear drain, ball valve NW 40 - Stand display - Kosthahn - Dom NW 500 - In good condition Dimensions: - Width: 1 400mm - Depth: 1 800 mm - Sheath height: 2 500 mm - Ground clearance: 150 mm - Total height: approx. 2900 mm
- Capacity : approx. 4 500 litres - Filling capacity : approx. 3 000 -3 500 kg - With slow-running special agitator Equipment: - Remaining drain ball valve NW 65 - Clear drain : NW 40 - Oval manhole . Kosthahn - Stand display - Dom NW 300 - In good condition Dimensions: Diameter: 1700m Height of curved bottom: 200mm Sheath height: 2'000mm Total height: approx. 2,800mm
- Capacity : approx. 5 000 litres - Filling capacity : approx. 3 500 – 4 000 kg - With slow-running special agitator Equipment: - Remaining drain valve NW 65 - Clear drain : NW 40 - Oval manhole - Kosthahn - Dom NW 400 Dimensions: - Diameter: 1 900 mm - Height conical bottom: 800 mm - Sheath height: 1 500 mm - Total height: approx. 2,900 mm
- Year of construction : 2000 - Membrane: 2024 - With 2 large filling doors - With central filling - With large juice tray - With foot extensions H 200 mm - Last ml in operation: 2025 harvest - Machine in very good condition Dimensions: - Length: approx. 4 700 mm - Width : approx. 1 900 mm - Height: approx. 2,000 mm
- Pole switchable: Forward – backward - Mobile version - Pump in good condition
- Year : 2000 - With grape crusher - Mobile version - Machine in very good condition
Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation. Technical Data Capacity: 40,000 bph (at 0,25L) Bottle Formats: 0.25L, 0.33L, 0,5L Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl Application: beer, CSD, or other beverages in non-returnable glass bottles Hygienic design Automated change-over Scope of Delivery Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Tray and/or ...
Overview This set of ten stainless steel isobaric tanks was manufactured between 2012 and 2024 by the Spanish company EtD (Talleres Esteban Tolosa). The lot includes five fermenters and three lagering tanks, all pressure-rated at 3 bar. All tanks are in good condition, fully functional, and well maintained. The newer 2024 models have seen minimal use. The tanks can be purchased as a complete set or individually upon request. Technical data Type: Isobaric fermenting and lagering tanks Manufacturer: EtD (Talleres Esteban Tolosa) Years of Manufacture: 2012 – 2024 Total Units: 10 (7 fermenters + 3 lagering tanks) Working Pressure: 3 bar Material: AISI 304 stainless steel Scope of Delivery Fermenting Tanks 3× 45 hL (net 45, gross 47) | EtD | 2012 2× 50 hL (net 50, gross 55) | EtD | 2024 2× 50 hL (net 50, gross 55) | EtD | 2020 Lagering Tanks 3× 50 hL (net 50, gross 55) | EtD | 012 ...
This empty crate inspection system was built in 2019 by the German manufacturer Indspect. The machine is until October 2025 in running production. Technical data Capacity: Adjustable For the inspection of damage empty crates
Overview The palletizer was manufactured by the German company KHS in 2005 and was until recently part of a bottling line in German dairy company. The palletizer is now being released as the owner is sgutting down the production. Technical details/ scope Worked with tray/cartons of 8 units (4x2) Pallet loader With shutter head Incl. protective fences, pallet transport, tray transport, tray turner, formation table, empty pallet magazine
Overview This traypacker with shrink wrapping system was manufactured in 2001 by Germany Meypack GmbH. The system consists of a traypacker (VP 521) and a shrink wrapping machine (SWT60) and is designed for automatic tray forming, packing, and film wrapping of cans and bottles. Products are grouped via an integrated conveyor system and packed into predefined formats. Technical data Capacity: approx. 40 trays/min Formats: 24 × 0.5 L cans 15 × 0.33 L sleek cans 4 × 6 × 0.33 L bottles 6 × 4 × 0.33 L bottles 8 × 3 × 0.33 L bottles 3 × 6 × 0.5 L bottles Application: Packaging of cans and bottles Configuration: Traypacker VP 521 + shrink wrapper SWT60 with integrated conveyor system Scope of Delivery Traypacker | Meypack GmbH | VP 521 | 2001 | Tray forming system with hot melt gluing (Series 3500V) Shrink wrapping machine | Meypack GmbH | SWT60 | 2001 | Film wrapping unit with shrink ...
- Press basket capacity : 22 hl - Year of construction: 2010 - Membrane: 2021 - New touchscreen + PLC/controller: 2023 - With central filling - With ORGAN – Program Equipment (2016) - With foot extensions - Mobile, with wheels - Last used for the 2025 harvest - Machine in very good condition
Capacity: 20 -25to/h Vintage: 2018 In very good condition Composed of : 1 Dosing table TRV 25 with special large hopper - With two vibration motors - With two screening zones - Total length 2 550 mm - Spout height : 1 350 mm - Hopper size : 1 800 x 1 750 mm - Dump height: approx. 2,200 mm 1 grape conveyor belt ELV TR 400 - With large special hopper - Discharge height: 4 300 mm Grapes destemming and sorting unit with: 1 Bucher Destemmer Delta E4 - Standard version - Destemming cylinder PHD 25 mm - With 2 cleaning balls 1 DELTA Trio XL sorting unit - Roll table with 36 sorting rolls - Adjustable 15 – 19 mm - Carrier frame in stainless steel, solid - Mobile version, with swivel castors. 1 F20 grape crusher 1 large hopper pump with scale - Content: 2 500kg - Solid base frame with feet and wheels - With integrated load cells. - Scales Mettler T ...
Overview The tray packer was built in 2015 by Italian manufacturer Atlanta. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 15 trays per minute Specifications: Currently entry on single lane Full set of new parts for entry on double lane included in supply For carton thickness: 2 to 5 mm Flap closes from the bottom Current configuration: for bottles PET 0.25L & 0.50L 4 packs/tray in 3x4 for 0.25L bottles 4 packs/tray in 2x3 for 0.50L bottles in carton neutral or printed Machine control: Siemens S7 touch screen Machine equipped with entry & exit conveyors
Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Direction of flow: clockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW
Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors Pneumatic do ...
Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2007 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request. Technical data Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) Formats: 20 cl returnable glass bottles Application: Empty bottle inspection (returnable glass bottles) Configuration: Single-lane installation between bottle washer and filler Inspection technology: HEUFT reflexx inspection system Inspection systems: Base inspection (foreign body detection) Finish inspection (mouth / finish defects) Double sidewall inspection with 90° rotation Residual liquid detection (Dual High Frequency + Infrared) Detection & rejection: Detection of fallen, tilted, higher or lower ...
