subcategories
(3rd category level)
Manufacturer:
(Category: 110)
voltage: 20-250 VAC VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length in total:1200 mmband width:500 mmconveying height:1200 weight of the machine ca.:1 tdimensions of the machine ca.:4,0 x 1,5 x 2,2 mswarf conveyor with coolant attachmentTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.
Set of multi-spindle heads from the Swiss brand Pibomulti. Incomplete, lack of clamps and nuts for tightening the bits.
new
: neu : 2025 : 050141 : prompt, Zwischenverkauf v : Polen : 2821.24 €: 1 : 200 x 32 x 32 mm: 1 kW: 2800 1/min: 42 mm: 470 mm: 250 mm: 1050 mm: 60 kgQuiet running, maintenance-free motorLaterally closed protective hoodsStable, adjustable workpiece supportsHigh safety comfort due to adjustable spark deflectorsSuitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc.Motor circuit breaker and undervoltage releaseSpark/eye protection on both sidesConnection cable with CEE plug 16 A1 grinding wheel each coarse and fineALTERNATIVES:Version without suction (Art. 317.762)Version without stand, suction and brake/emergancy push button (Art. 317.774)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
System Hexagon Global S 7/5/05 Green Year of manufacture: 2018 Measuring volume: X=500mm, Y=700mm, Z=500mm DC-241 Controller Control: Jog Box (NJB) HP-S-X3C Scanning Sensor Push-button for removal 5x60 mm HR-X-700 automatic exchange bench with 3 shelves and 3 holders Computers & Software Work table Accounting system Pre-configured computer system Monitor Inkjet Printers PC-DMIS CAD Measurement Software PC-DMIS Stylus Change Support Software PC-DMIS Q-DAS Converter The complete system is in mint condition with few hours of operation The machine can be viewed under power
grinding length: 600 mmgrinding width: 400 mmworkpiece height: 400 mmtotal power requirement: kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3400 x 2647 x 2203 mmHorizontal surface grinder in almost new condition with few operating hours!Operating hours: see imagePC control OkamotoTravel X-axis: 600 mmTravel Y-axis: 22.5 – 497 mmTravel Z-axis: 400 mmSpeed range rpm: 1-2800 (stepless)Rapid traverse mm/min: 4000Main drive kW: 7.5Maximum table load in kg: 1000Accessories:- Electro-permanent magnetic clamping plate: 400 x 600 P13 mm, height 80 mm (make Wagner)- 2 grinding wheel flanges- Table dresser- Automatic straight dresser, spindle box mounted- Automatic compensation of the wheel dressing amount- Automatic central lubrication- Ball screw in the Y and Z axes with AC servo motor and measuring system- Coolant system with belt filter systemThe data for this ad was creat ...
: neu : ca. 2 - 4 Wochen ab Auftr : 4533.22 €: 300 x 40 x 51 mm: 2,2 kW: 1250 1/min: 42 mm: 540 mm: 530 mm: 1180 mm: 800 x 600 x 1400 mm: 90 kgWith machine stand, integrated suction, emergency stop pushbutton and brake (Art.317.779)Quiet running, maintenance-free motorLaterally closed protective hoodsStable, adjustable workpiece supportsHigh safety comfort due to adjustable spark deflectorsSuitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc.Motor circuit breaker and undervoltage releaseSpark/eye protection on both sidesConnection cable with CEE plug 16 A1 grinding wheel each coarse and fineALTERNATIVE:Version without suction (Art. 317.776)Version without stand, suction and brake/emergancy push button (Art. 317.764)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : 4852.45 €: 250 x 40 x 51 mm: 1300 x 75 mm: 1,4 kW: 1400 1/min: 15 m/s: 42 mm: 600 mm: 540 mm: 1190 mm: 1200 x 800 x 1000 mm: 70 kgWith base frame, integrated suction and brakeHigh performanceBelt grinding device height adjustable 0-90°.Maximum usable face grinding areaBelt adjustment with fine adjustmentLongitudinal stop for material guidePerfectly balanced and low vibrationConnection on both sides for dust extraction Ø 50 mmMotor protection switch with undervoltage releaseFixed stop1 Sanding belt standard (brown), grit 801 grinding wheel 250 x 40 x 51 mm, grit 80Spark protectionConnection cable with CEE plugALTERNATIVES:Version without suction (Art. 330.365)Version without stand, suction and brake (Art. 330.360)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2018 : 070033 : prompt, Zwischenverkauf v : Türkei : 20310 €: 389.95 €: 1 : 0.6 - 4 mm: 300 mm: 900 mm²: 80 mm: 10 Nm: 2.62 kW: 1000 mm: 800 mm: 1400 mm: 330 kgDEMO MACHINEhelical gear box Wattdrivepneumatic equipment Festocontrol SCHNEIDER with touchscreen2 driven rollsremote service modulehand wheel Euchneroperating manual in German with EC conformity declarationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 12000 mmtable width: 8000 mmtable height: 800 mmThickness of the plate: 300 total power requirement: kWweight of the machine ca.: 82,5 tdimensions of the machine ca.: 12x8 m8 availableAll 8 panels measure 8000 x 12000 mm.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rated capacity: 4,1 kWcurrent intensivity: 7,2 Atemperature: max. 65,8 °Coperating pressure: max. 42 bartemperature: (Water): max. 35 °Coperating pressure: (Water): max. 6 barAmbinent temperature: -5 / +43 °Cweight of the machine ca.: 143 kgdimensions of the machine ca.: 1,3 x 0,6 x 0,8 mChillerICS COOL ENERGY - IC 220- Refrigerant R410AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
external diameter: 420 mminternal diameter: 100 mmwidth: 5 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Light source: 1 0voltage: 24VDC VCapacity: 13 WattThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic clamps, taps, milling cutter bodies, drills Auction-ID: A1-43691-206
2Pcs CNC Turning center tool holders. Center distance 65mm Auction-ID: A7-43477-235
Jaw width 90 mm Auction-ID: A1-43691-128
Jaw width 90 mm Auction-ID: A1-43691-132
Max. feed length: 2,600 mm Direct input of the dimension via touchscreen or via glazing bead calipers Profile slide can be folded up for insertion
Year of construction 2014 Single-channel charging magazine with Vulkollan channel Remnant output into the machine room Servo drive Glass wrapping and axial displacement 1 guide channel set Vulkollan up to max. LW 46 mm incl. material slider with high-performance oil flow PLC control, integrated terminal with touch screen Manually adjustable material separation Loading area: 3250 x 370 mm Good condition
divided 2x3 meters (with connecting straps) movable, ideal as a cutting table, with approx. 20mm table top, 6000 x1000 mm beveled on both sides, with connecting straps to the cutting shear, working height 940 mm Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working width: 1000 mm Working length: 6000 mm Weight: 150 kg Load capacity: 250 kg Colour: anthracite grey matt
diameter: 42 - 80 mmlength: 350 - 520 mmtool adaptor: MK4, MK5, MK6 12 twist drills, also available individually:1 MK6, diameter 80 mm EUR 150.001 MK5, diameter 70 mm EUR 90.002 MK5, diameter 60 mm EUR 60.00 each3 MK5, diameter 55 mm EUR 55.00 each2 MK5, diameter 50 mm EUR 55.00 each1 MK5, diameter 42 mm EUR 55.00 1 MK4, diameter 50 mm EUR 45.00 1 MK4, diameter 45 mm EUR 45.00 plus VATMachine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
G. Folmer
60 € 