Manufacturer:
(Category: 101-50)
Inv. Num. : 9105 Type: MIKRON VCE 800 PRO Producer: Agie Charmilles Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Work table length: 910 mm Work table width: 500 mm Maximum table load (uniform): 1100 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Machine weight: 5000 kg
Bridge type Machining Centre ISPER HASP 643 WAVE - 30.000 rpm - travel 650x420x350 mm - CNC SELCA 4045D, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 700x400 mm, Longitudinal travel x axis: 650 mm, Cross travel y axis: 420 mm, Vertical travel z axis: 350 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 20.000 mm/1, Rapid feed x-y-z axes: 20.000 mm/1, Spindle taper type: HSK 40-E, Automatic tools change nr.: 20, Spindle speed: 0- 30.000 rpm, Spindle motor power: 8 Kw, Cnc: SELCA 4045D, Approx net weight: 4.500 Kg, Accessories: Chip conveyor, RENISHAW Probe
The machine is in good technical condition, after prior agreement it is possible to test it. Only 600 mth of mileage! Table size 1300X700mm, X-1220, Y-710, Z- 630mm, machine power 37kw, spindle speed 60-10000rpm, machine weight 9500Kg, control system Heidenhain TNC 640, tool magazine 24 positions.
x-travel: 1050 mmy-travel: 530 mmz-travel: 630 mmControl: Heidenhain TNC 620 table surface area: 1150 x 560 mmtool taper: SK 40 spindle turning speed range: 10000 U/minfeed range: mm/minrapid traverse: 24 m/minspindle drive: kWtotal power requirement: 25 kVAweight of the machine ca.: 7,8 tdimensions of the machine ca.: 4,3 x 2,4 x 2,9 mWorking hours (date 10. February 2026):- Control on: 20811 h- Machine on: 13353 h- Programm cycle: 7412 h- Spindle hours : 5184 hEquipment:CNC control Heidenhain TNC 620Electronic handwheel HeidenhainTool measuring systemLinear scales in all axes X/Y/ZPreparation for measuring probe30-station tool changerCoolant equipment with paper band filter systemInternal coolant supply through the spindle 20 barBlown air through the spindleChip conveyorMachine documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc 31iMB in standard version, including the following special equipment of the machine: control system dialogue in Czech language Automatic tool change – 24 pcs Z-axis travel – 1500 mm with raised stand Chip conveyor Workpiece probe OMP-60 Tool probe TS-27R Spindle power 22/26 KW Horizontal spindle speed 5000 rpm. Manual rotating head, speed 3500 rpm. Spindle center cooling Tool magazine can be tilted out of the table space – next to the stand on the left
CONTROLS CNC controls FANUC 310 IS WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 X-axis travel: 600 mm Y-axis travel: 410 mm Z-axis travel: 460 mm rotating range A-axis from: -30 ° rotating range A-axis up to: 120 °TABLE clamping surface diameter: 350 mmSPINDLE / HEAD spindle revolutions (max): 12000 /min drive power: 18 kWAXIS DRIVES rapid traverse: 4800 mm/minTOOL MAGAZINE number of positions: 30 DIMENSIONS / WEIGHTS space requirements -left/right-: 3000 mm space requirements -front/back-: 2400 mm total height: 1980 mm total weight approx.: 7500 kgOperating hours: 35`000hInklusieve: Vices see picture
Key data: 750 mm, 400 mm, 500 mm
Inv. Num. : 8792 Type: Mikron VCE 750 Producer: HAAS Created: 1997 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 350 mm Maximum vertical spindle speed: 7500 1/min X-axis travel: 750 mm Y-axis travel: 400 mm Travel Z axis: 500 mm Cone: SK 40 Number of all tools: 20 pieces Equipment: 4. Axis 2023: Replacement of the manual gearbox of the tool changer Replacement of the tool plate magazine
travel -x axis: 3.000 mmtravel -y axis: 560 mmtravel -z axis: 720 mmcontrol: Siemens - 840D number of spindle speeds: 18.000 U/minnumbers of positions in the tool changer: 100 tool taper: HSK 63 Milling machining centers - vertical | DMG - DMF 300 LinearThe machine has exclusively processed aluminum is in a well-maintained condition and can be inspected at any time under power.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300LinearThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, testing is possible by prior arrangement.
travel -x axis: 3.000 mmtravel -y axis: 560 mmtravel -z axis: 720 mmcontrol: Siemens - 840D number of spindle speeds: 18.000 U/minnumbers of positions in the tool changer: 100 tool taper: HSK 63 Milling machining centers - vertical | DMG - DMF 300 LinearThe machine has exclusively processed aluminum is in a well-maintained condition and can be inspected at any time under power.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300LinearThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Siemens 828D Travel X/Y/Z: 1100 x 610 x 610 mm Table size: 1250 x 610 mm Spindle speed: 12,000 min-1 Tool magazine for 30 Wkz., SK 40 Cooling by the spindle 3D Probes
x-travel: 1626 mmy-travel: 1016 mmz-travel: 762 mmCNC-control: HAAS CNC Table dimensions: 1626 x 914 mmmax. table load: 1814 kgspindle taper: BT 40 spindle turning speed range: 15000 U/minspindle motor: 22,4 kWfeed range: 1270 mm/minrapid traverse: 15,2 m/mintool change unit: 30 Pos.coolant: IKZ total power requirement: kWweight of the machine ca.: 11,2 tdimensions of the machine ca.: 4,91 x 3 x 3,43 mEquipped with:- HAAS CNC control- Fixed table- Chip conveyor- IKZ- 31-position tool changer (BT 40)The machine has only 1,200 operating hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 9047 Type: VF 0 Producer: HAAS Created: 2001 Parameters: Work table length: 660 mm Work table width: 356 mm Maximum table load (uniform): 1361 kg Maximum vertical spindle speed: 7500 1/min X-axis travel: 508 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3630 kg
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 4 X-axis travel: 550 mm Y-axis travel: 320 mm Z-axis travel: 360 mmTABLE table surface (left-right): 820 mm workpiece load (max): 500 kgSPINDLE / HEAD spindle revolutions (max): 24000 /min tool fixture: HSK A50 AXIS DRIVES rapid traverse: 75000 mm/minTOOL MAGAZINE number of positions: 24 AUTOMATIC WORKLOAD EQUIPMENT workpiece manipulator: articulated robot store type: table changer number of store positions: 2 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS total weight approx.: 7700 kgATTACHMENTS guideway covers: yes central lubrication system: yes chip conveyor: yes coolant unit: yes closed cabin: yes European CE standards: yes - Shuttle table machine- Knoll (KSS) ...
Key data: 1050 mm, 510 mm, 510 mm
Inv. Num. : 9045 Type: VCN-510C Producer: MAZAK Created: 2005 Parameters: Control system: MAZATROL 640M NEXUS Work table length: 1300 mm Work table width: 550 mm Maximum table load (uniform): 1200 kg Speed: 12000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Machine weight: 7100 kg
CONTROLS CNC controls HAAS WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 3048 mm Y-axis travel: 1016 mm Z-axis travel: 762 mmTABLE table surface (left-right): 3048 mm table surface (front-back): 711 mmSPINDLE / HEAD drive power: 15 kW tool fixture: ISO SK 40 TOOL MAGAZINE magazin type: disc magazine number of positions: 24 ELECTRICAL SPECIFICATIONS total power consumption: 15 kWDIMENSIONS / WEIGHTS space requirements -left/right-: 6528 mm space requirements -front/back-: 3531 mm total height: 3105 mm total weight approx.: 15368 kgATTACHMENTS autom. tool clamping: yes chip conveyor: yes coolant unit: yes closed cabin: yes European CE standards: yes Under powerA lot of toolsDelivery to enduser 2008
CNC Vertical Machining Center "KUNZMANN BA 1000 SK" With track control Heidenhain iTNC 530 Year of Make: 2013 Travels: X 1020 Y 620 Z 920 Speed range: 1 – 14,000 rpm infinitely variable With the following accessories: Rigid angle table 1200 mm x 610 mm clamping surface NC Attachment Rotary Table WALTER 0 500 mm B Axis Swivel Head (Torque Drive) + 30 / - 120 degrees Vertical tool changer with 40 magazine positions ( SK 40 ) 3 D Probe Heidenhain Electronic handwheel Fixed full protective cladding with interior lighting IKZ plant Coolant Setup Oil mist extraction Chip conveyor Operating instructions
x-travel: 1050 mmy-travel: 530 mmz-travel: 630 mmControl: Heidenhain iTNC 530 spindle turning speed range: 10.000 U/mintool taper: ISO 40 table-size: 1150 x 560 mmtable load: 0,7 ttool magazin:: 30 pcs. : total power requirement: 25 KvAweight of the machine ca.: 7,8 tdimensions of the machine ca.: 5,0 x 3,5 x 2,,9m mincluding current geometry protocolIncludes infrared measuring probeIncludes electric handwheelIncludes chip conveyorIncludes coolant systemIncludes internal coolant supply (20 bar)Includes indicator lightIncludes documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Vertical Machining Center "MÜGA S 3030" With MITSUBISHI track control Year of Make: 2013 Travel: X 300 Y 250 Z 250 Speed range: 60 – 15,000 rpm infinitely variable With the following accessories: Rigid angle table 400 mm x 250 mm clamping surface Vertical tool changer with 12 magazine positions ( SK 30 ) Various tool holders ( SK 30 ) 2-fold pallet changer 4 Allmatic vices jaw width 100 mm Electronic handwheel Full protection cabin with sliding doors and interior lighting IKZ system with paper belt filter Coolant Setup Signal light 2 colours Chip conveyor 6 pcs. machine shoes Operating Instructions
travel -x axis: 1.050 mmtravel -y axis: 570 mmtravel -z axis: 510 mmcontrol: HEIDENHAIN - TNC620 number of spindle speeds: 12.000 U/mintool taper: BT 40 table dimension (L x W): 1300 x 570 mmnumbers of positions in the tool changer: 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor.The machine only has 13.600 spindle hours.The machine is in a well-maintained condition and has exclusively workedon Aluminum and Plastics.The machine video from the production plant will be shared on request.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DNM5700 | DNM-5700The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Siemens 828D Travel X/Y/Z: 1300 x 710 x 610 mm Table size: 1450 x 610 mm Spindle speed: 12,000 min-1 Tool magazine for 30 Wkz., SK 40 Cooling by the spindle 3D Probes
control: FIDIA PCN 775 : . x-travel: 1000 mmy-travel: 620 mmz-travel: 700 mmAxis: 5 Achsen simultan gesteuertweight: 12 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8982 Type: GX 1000 Producer: Bridgeport Hardinge Created: 2007 Parameters: Control system: Siemens 810 D Number of stacking positions: 24 pieces Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Cone: SK 40 With automatic change
Vertical machining centre BRIDGEPORT GX 1600 - travel 1600x700x635 mm, CNC FANUC 0i-MD - coolant thrugh spindle, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1700x700 mm, Longitudinal travel x axis: 1600 mm, Cross travel y axis: 700 mm, Vertical travel z axis: 635 mm, Working feed x-y-z axes: 0 - 36.000 mm/1, Rapid feed x-y-z axes: 36 mt/1, Spindle taper type: 40 DIN-BT, Automatic tools change nr.: 30, Spindle speed: 0- 12.000 rpm, Spindle motor power: 22 Kw, Cnc: FANUC 0i_MD, Approx net weight: 10.000 Kg, accessories: Chip conveyor, coolant tank, coolant thrugh spindle
CNC Vertical Machining Center "BRIDGEPORT VMC 800" With track control Heidenhain TNC 410 Year of Make: 2000 Travels: X 800 Y 500 Z 500 Speed range: 0 – 10,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 500 mm clamping surface Vertical tool changer with 20 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant device with reinforced pump 20 bar Chip conveyor Operating instructions
WORKING RANGE -CUBIC- X-axis travel: 1270 mm Y-axis travel: 660 mm Z-axis travel: 635 mmSPINDLE / HEAD spindle revolutions (max): 7500 /minBASIC FUNCTIONS number of spindles: 1 number of turrets: 0 live positions: yes number of c-axes: 0 number of y-axes: 1 number of b-axes: 0 ATTACHMENTS chip conveyor: yes WORKING RANGE TURNING swing diameter (max): 635 mm worpiece length max.: 1372 mm workpiece weight max.: 1814 kgMAIN SPINDLE spindle revolutions (min): 0.001 /min spindle revolutions (max): 7500 /minX/Z SLIDE Z-axis travel: 635 mm X-axis travel: 1270 mm Y-axis travel: 660 mmTOOL MAGAZINE tool diameter max.: 178 mm tool length max.: 406 mm tool weight max.: 13.6 kg
CNC Vertical Machining Center DECKEL MAHO DMU 50 eVo linear NEW DMG Design With track control Heidenhain iTNC 530 Year of Make: 2010 Travel: X 500 Y 450 Z 400 Speed range: 0 – 18000 rpm infinitely variable ( SK 40 ) With the following accessories: 2-Axis NC Swivel Rotary Table 500mm x 380mm Vertical tool changer with 120 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 IKZ 40 bar with paper belt filter Chip conveyor 3 D Probe BLUM tool measurement in the work area Signal light 4 colour DMG Automation PH 150/8 16 pallets with Allmatic + Lang vises Coolant Setup BEMA Coolant Nozzle 4 Height Adjustable Machine Shoes Operating Instructions
x-travel: 1140 mmy-travel: 710 mmz-travel: 610 mmCNC-control: Heidenhain TNC640 table-size: 1300 x 700 mmmax. table load: 1000 kgspindle taper ISO: ISO 40 spindle turning speed range: 8.000 U/minfeed stepless: max. 10.000 mm/minrapid traverse: 24/24/24 m/mindrive capacity - spindle motor: 7,5 / 11 kWtool change unit: 30 Pos.coolant: IKZ 40 bar chip conveyor: kWvoltage: 400 Vtotal power requirement: 25 kVAweight of the machine ca.: 9,0 tdimensions of the machine ca.: 3,25 x 3,08 x 3,00 m- Serial No.: 4P11152J1- TSC 40 bar incl. 600 liter coolant tank with paper band filter unit- Y-Axis with 4 liear guide rails!- X- and Z-Axis with 6 roller supports for each axis!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Heidenhain iTNC 520 Travel X/Y/Z: 1200 x 900 x 500 mm Spindle speed 16,000 min-1 Tool magazine for 30 Wkz. + additional magazine for 57 Wkz. HSK-A 63 IKZ 40 bar Chip conveyor Measuring Probe Heidenhain Blum Laser System
Bridge type Machining Centre DMG DMC 100 V Hi-Dyn - 18.000 rpm - corse 1000x800x650 mm - CNC HEIDENHAIN i530, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1250x800 mm, Longitudinal travel x axis: 1000 mm, Cross travel y axis: 800 mm, Vertical travel z axis: 500 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 35.000 mm/1, Rapid feed x-y-z axes: 50.000 mm/1, Spindle taper type: 40-Din 69871, Automatic tools change nr.: 30, Spindle speed: 0- 18.000 rpm, Spindle motor power: 15 Kw, Cnc: HEIDENHAIN i530, Approx net weight: 00.000 Kg, Accessories: Chip conveyor
Control Winmax Travel X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed 12,000 min-1 Tool magazine for 24 Wkz., SK 40 Cooling by the spindle 20 bar
x-travel: 1000 mmy-travel: 550 mmz-travel: 500 mmCNC-control: Fanuc Oi-MD table-size: 1.100 x 500 mmmax. table load: 700 kgspindle taper ISO: BT-40 spindle turning speed range: 12.000 U/minfeed stepless: 24.000 mm/minrapid traverse: 36/36/30 m/mindrive capacity - spindle motor: 15/11 kWtool change unit: 24 coolant: IKZ 20 bar chip conveyor: voltage: 400 Vtotal power requirement: 30 kVAweight of the machine ca.: 6,5 tdimensions of the machine ca.: 3,35 x 2,20 x 2,67 m- Serial No..:M281361B5N D- NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Winmax Travel X/Y/Z: 1270 x 660 x 610 mm Spindle speed 10,000 min-1 Tool magazine for 24 Wkz., SK 40 IKZ 20 bar Pocket milling machines with islands Synchronous threading
x-travel: 600 mmy-travel: 400 mmz-travel: 510 mmtable-size: 800 x 400 mmControl: HEIDENHAIN iTNC 530 spindle turning speed - stepless: 12.000 U/minfeed speeds - directly programable: 30.000 mm/mintool taper: ISO40 tool magazin:: 20 total power requirement: 25 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: LTH 3,5 x 2,1 x 2,95 mControl unit operating time: 32,790 hours.Spindle operating time: 10,310 hours.Includes Heidenhain electric handwheel.Includes electric touch probe.Includes internal coolant supply.Includes chip conveyor.Includes Gressel Gripos machine vise.Includes USB port.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of construction: 2009 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1500 Y-axis travel mm: 800 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001º) A-axis degrees: 0º/-90º B-axis degrees: ±90(0.001º) Rapid traverse m/min: 30 Worktable Number of pallets: 4 Table dimensions mm: Ø1000x800 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 16000 Spindle drive power kW: 28(100%ED) Spindle torque Nm: 84/63 (40/100%ED) Tool system Tool holder: HSK-A 63 Tool magazine slots: 208 With free neighboring places mm: 140 With occupied neighboring places mm: 80 Max. Tool Length mm: 330 Max tool weight kg: 10 Chip-to-chip time s: 7 Equipment Chip conveyor Signal lamp Tool measuring arm Bar loader Chuck foot switch (double) for main and counter spindle Driven tools included Machine running times Under power: 25546 Rated power kVA: 54 Basi ...
x-travel: 700 mmy-travel: 420 mmz-travel: 610 mmtable-size: 1260 x 490 mmspindle taper: HSK E50 spindle turning speed range: 36000 U/mintool change unit: 42 weight of the machine ca.: 5 tHEIDENHAIN TNC430Coolant through spindlewww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8930 Type: DMC 635 V eco Producer: DMG Created: 2008 Parameters: Control system: Siemens 810D Work table length: 790 mm Work table width: 560 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 635 mm Y-axis travel: 510 mm Travel travel Z-axis: 460 mm Machine weight: 4500 kg
CONTROLS CNC controls HEIDENHAIN TNC 426 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 610 mmTABLE table surface (left-right): 920 mm table surface (front-back): 380 mmSPINDLE / HEAD spindle revolutions (min): 50 /min spindle revolutions (max): 18000 /min tool fixture: ISO SK 30 TOOL MAGAZINE number of positions: 24 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2000 mm space requirements -front/back-: 1700 mm total height: 3000 mm total weight approx.: 3200 kgATTACHMENTS chip conveyor: no coolant unit: yes through spindle coolant attachment: no closed cabin: yes European CE standards: yes Machine in TOP condition- Power ON : about 37000 h- Spindle hour ...
Inv. Num. : 8929 Type: DMC 635 V Producer: DMG Created: 2007 Parameters: Control system: Heidenhain iTNC 530 Work table length: 790 mm Work table width: 560 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 635 mm Y-axis travel: 510 mm Travel travel Z-axis: 460 mm Machine weight: 4500 kg
x-travel: 500 mmy-travel: 420 mmz-travel: 500 mmspindle taper: SK 40 table surface area: 700 x 400 mmtable load capacity: 800 kgcontrol: Heidenhain TNC 426 rated capacity: 40 kVAvoltage: 400 Vweight of the machine ca.: 6,5 tdimensions of the machine ca.: 3,4 x 3,7 x 2,9 mDECKEL-MAHO machining centres are suitable for manual and automatic operation.--> Area of application MILLING: --> DRILLING:--> Face milling --> Face countersinking--> Circular milling --> Circular drilling--> Screw milling --> Screw drilling--> Gear milling --> Profile drilling--> Profile milling --> Form drilling--> Form milling--> Including vertical tool changer with double gripper--> Tool magazine, variable space coding (VPC):--> Number of tools: 20--> Standard tool - max. Ø: 90 mm--> Special tool - max. Ø with free neighbouring spaces: 140 mm--> Max. tool length from spindle nose: 300 ...
x-travel: 1040 mmy-travel: 600 mmz-travel: 500 mmControl: Heidenhain iTNC 530 table surface area: 1250 x 600 mmtable load: 600 kgtool taper: SK 40 spindle turning speed range: 1 - 8000 U/minmax. torque on the spindle: (S1/S6) 140/200 Nmfeed range: 40000 mm/minrapid power traverse in X-and Z direction: 70 m/minrapid motion - y-axis: 40 m/minspindle drive: (100/40 % ED) 13/19 kWtotal power requirement: 39 kVAweight of the machine ca.: 8,9 tdimensions of the machine ca.: mOperating hours 70278Spindle hours 23335Please note the enclosed geometry measurement report with the tool pull-in force measurement.Equipment:CNC control Heidenhain iTNC 530Electronic handwheel Heidenhain HR 410Motor spindle with increased torqueDirect path measuring system in Y-Z axisPreparation for measuring probe30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kgROTOCLEARProduction package 2Inte ...
Key data: 1100 mm, 600 mm, 600 mm
Vertical CNC Machining Center Manufacturer: Kaast Type V11L Year of construction 2022 Control Siemens 828 Shop Mill Travel X/Y/Z 1100/600/600mm 24 Way Tool Changer Tool holder SK40 max. speed 10,000 rpm Measuring System Linear Glass Scales Chip conveyor Tool Breakage Control Air and coolant cooling Machine is in a used good condition. For more information, I am always available at 0177 8957069. Machine will be available from March 2026.
Control: Manufacture: FANUC 0i-MD x-travel: 1000 mmy-travel: 550 mmz-travel: 500 mmtable surface area: 1100 x 500 mmspindle turning speed - stepless: 10000 U/mindimensions of the machine ca.: 3500 x 2200 x 2700 mmxmmxmmweight of the machine ca.: 6.5 ttool piece magazine with: 24 Plätzen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8906 Type: MV 154 APC E 12B Producer: Quaser Created: 2012 Parameters: Control system: FANUC Oi-MD Work table length: 800 mm Work table width: 500 mm Maximum table load (even): 250 kg Spindle drive power: 11/18.5 kW Minimum vertical spindle speed: 50 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 700 mm Y-axis travel: 500 mm Travel Z-axis: 560 mm Cone: ISO 40 Machine height: 3080 mm Machine length: 4250 mm Machine width: 2850 mm Machine weight: 8500 kg Equipment: Chip conveyor Pallet Changer Workpiece Probe Tool probe
x-travel: 710 mmy-travel: 500 mmz-travel: 500 mmtable-size: 1080x580 mmspindle taper: SK40 spindle turning speed range: 10000 U/mintool change unit: 30 weight of the machine ca.: 10 tHEIDENHAIN TNC430Coolant through spindlewww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8902 Type: Vesta 1000 12K Producer: Hwacheon Created: 2016 Parameters: Control System: FANUC Series Oi-MF Hours: 15976 h Work table length: 1100 mm Work table width: 502 mm Spindle drive power: 11 kW Maximum spindle speed: 12000 1/min X-axis travel: 1000 mm Y-axis travel: 550 mm Travel Z axis: 500 mm Cone: BT40 Max. tool length: 300 mm Max. tool weight: 8 kg Max. tool diameter: 80/150 mm Rapid traverse X/Y/Z: 36/36/30 m/min Machine height: 2670 mm Machine length: 3335 mm Machine width: 2200 mm Machine weight: 6500 kg Equipment: Tool probe Workpiece Probe 4th axis TSUDAKOMA
x-travel: 6000 mmy-travel: 1000 mmz-travel: 1200 mmtable-size: 6400x1000 mmtool change unit: 80x spindle taper: HSK A100 spindle turning speed range: 45-9000 U/mintotal power requirement: kWweight of the machine ca.: 48 tdimensions of the machine ca.: 12x4.3x4.5 mSIEMENS 840D4th axis B-Axis +/-90°Spindle coolant through spindleTool measuring devicewww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8881 Type: PRO-1000 A Producer: Hartford Generated: Parameters: Control system: FANUC Work table length: 1150 mm Work table width: 600 mm Maximum spindle speed: 8000 1/min X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Machine weight: 6000 kg Equipment: Tools
x-travel: 1020 mmy-travel: 540 mmz-travel: 540 mmtable-size: 1120x540 mmspindle taper:: BT40 spindle turning speed range: -8000 U/mintool change unit: 24x weight of the machine ca.: 5.2 tSIEMENS 810D ShopmillWith NC dividing headHEIDENHAIN TS27 Measuring systemHEIDENHAIN MP12 Measuring probeMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
