used Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) for sale

turning diameter over bed: 500 mmturning length: 1500 mmcentre height: 250 mmspindle passage: 70 mmswing diameter over face slide: 285 mmturning speeds: 11,2 - 2240 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 330 mmturning length: 830 mmswing diameter over bed slide: 196 mmSwingdiameter in the bed bridge: 170 centre height: 165 mmcentre distance: 830 mmTurning length in the bed bridge: 430 reus: 16 (70-2000) U/mintail stock: MK 3 quill stroke: 110 mmdiameter of quill: 32 mmspindle taper: DIN ISO 702-2 Nr. 4 spindle bore: 38 mmspindle cone: MK 5 feed: längs 32 / 0,052 1,392 m/minfeed: plan 3,2 / 0,014 0,38 m/mintotal power requirement: kWweight of the machine ca.: 0,52 tdimensions of the machine ca.: 1,7 x 0,75 x 1,6 mFully equipped leading and tension spindle lathes. TH 3309D withdigital position indicator DPA 21/3402040- Hardened and ground Z-axis guideway- Spindle mount Camlock DIN ISO 702-2 No. 4- Precisely crafted slide- Handwheels with adjustable fine scale 0.04 / 0.02 mm- Quadruple steel holder- All guides can be adjusted using V-ledges- Main spindle running in an oi ...

turning diameter: 420 mmturning length: 1500 mmswing diameter over bed slide: 250 mmSwingdiameter in the bed bridge: 590 mmcentre height: 210 mmTurning length in the bed bridge: 260 mmreus: 16 (45-1800) U/mintail stock: MK 4 quill stroke: 120 mmdiameter of quill: 50 mmspindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mmspindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/minfeed: plan 17 / 0,025 - 0,85 m/mintotal power requirement: 4,6 kWweight of the machine ca.: 1340 kgdimensions of the machine ca.: 2440 x 915 x 1375 mmFully equipped leading and tension spindle lathes. TH 4215 withdigital position indicator DPA 21- Hardened and ground Z-axis guideway- Spindle mount Camlock DIN ISO 702-2 No. 6- Precisely crafted slide- Handwheels with adjustable fine scale 0.04 / 0.02 mm- Quadruple steel holder- All guides can be adjusted using V-ledges- Upper slide adjustment range ± 90 °- Guaranteed  ...

Height tips 300 mm Distance between tips 4,000 mm Spindle speed (16) 15-1,500 rpm Bar pass 105 mm Engine power 15 HP displayed with ELBO system

Description: machine bed with offset, incl. accessories consisting of quick-change holder, various jaw chucks, steady rests, spare jaws, boring jaws Drehlänge: 1,500 mm, turning diameter over bed: 700 mm, turning speed range: - 2000 rpm, weight approx.: 4,200 kg, Approx. Onsite Dimension. (l x w x h): 3,200 x 1,500 x 1,500 mm

Ref. -No.: 10314Manufacturer: PINACHOYear of construction: 2005Type of control: KonventionellStorage location: HalberstadtCountry of origin: SpainTravel quill: 180 mmTurning Diameter: 630 mmTurning Length: 3000 mmTurning Diameter Over Bed: 620 mmCross Movement. (X-Axis): 365 mmTailstock Quill Diameter: 72 mmTurning diameter over cross slide: 880 mm

Key data: 650 mm, 1300 mm, 1 U/min

Circulation diameter over bed 1300 mm, over support 1000 mm Center width 6000 mm Bore 130 mm Speed 1.6 - 630 1/min, infinitely variable in 3 ranges Longitudinal feeds 0.09 - 5 mm/rev Thread metr. 0.56 - 128 mm Thread inches 64 - 0.28 g/" Tailstock quill travel 250 mm Total connected load approx. 52 kW Rapid traverse Rotating bezel 2 fixed bezels closed 1 fixed bezel open Coolant tank with pump

Description: PRVOMAJSKA Center Latheweight approx.: 2,200 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,000 x 1,400 mm

turning length: 1500 mmturning diameter over bed: 460 mmturning diameter over slide rest: 240 mmturning dia. in gap: 650 mmnumber of spindle speeds: 32 - 2000 U/min.turning speeds: 12 Stk.spindle bore: Ø 58.0 mmquill stroke: 130 mmbed width: 300 mmtailstock quill taper MT: DIN 228 / MK 4 spindle taper: DIN 55027 / D 1-6 feeds - longitudinal: 0,031 - 1.7 mm/Ufeeds - cross: 0,014 - 0,784 mm/Uvoltage: 380 Vtotal power requirement: 5.5 kWweight of the machine ca.: 1977 kgrange L-W-H: 2750 x 1080 x 1370 mm Machine from a maintenance workshop current new price ~ 17.500 euros Special price on requestLathe with precision ground and induction hardened bed.Very suitable, for example, for use in workshops and teaching facilities.Furnishing:- robust lead and pull spindle lathe- RÖHM 3-jaw chuck, including replacement jaws & chuck key- foldable lathe chuck protection- MULTIFIX steel holder - size B ...

Description: Serial number: 983701 Turning diameter over bed: 300 mm Turning diameter over support: 200 mm Center width: approx. 700 mm Spindle bore: approx. 40 mm Speed range: 70 - 1400 rpm With lathe accessories, including turning tools, centers, jaws for jaw chucks and other accessories as shown in the picturesweight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 800 x 1,350 mm

Description: Diameter of self-centering head: 100 mm Maximum distance spindle - tailstock: 350 mmweight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 960 x 400 x 1,150 mm

turning diameter over bed: 450 mmturning length: 1000 mmturning diameter over slide: 232 mmengine output: 10 PSturning speeds: 31 - 1600 U/minweight of the machine ca.: 1,7 trequired space: 2,50 x 1,30 x 1,60 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 425 mmcentre height: 200 mmcentre distance: 1500 mmturning diameter over slide rest: 235 mmturning dia. in gap: 470 mmspindle bore: 45 mmcamlock: D6 lead of leadscrew: 6 mmtailstock quill taper MT: 4 diameter of quill: 55 mmquill stroke: 160 mmweight of the machine ca.: 1.5 tnumber of spindle speeds: 36-2240 Digital read-outMisc accessoriesMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: . : 1990 centre distance: 1400 mm: 505 mm digital readout: . bed bridge: . tool adaptor: multiple Aufnahme weight of the machine ca.: 2,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw cutter lathe Ryazan 165 distance between centre: 3000mm, turning diameter over slide rest: 1000 mm, turning length: 3000 mm, spindle bore: 95 mm, weight: 12,5 ton Price 8500EUR

Screw-cutter lathe Ryazan 165 Max. work piece diameter 1200 mm Max. work piece diameter above support 650 mm Distance between centers 5000 mm Diameter of spindle hole 85 mm Spindle speed, rpm 5…500 Spindle moto 22 kW Threading: – metric 1…120 – inch 28…1/4 – module 0,5…30 Number of threads: – metric 44 – inch 31 – module 37 Machine dimensions, mm 8050 x 2200 x 1876 Weight of the machine, kg app. 16800 Price - 12500 EUR

Screw-cutter lathe Ryazan1A64 - max turning length: 2800 mm - turning diameter above the bed (max): 800 mm - turning diameter above cross slide (max): 450 mm - workpiece weight in chuck (max): 5000 kg - lathe length: 5825 mm - lathe width: 2000 mm - lathe height: 1660 mm - lathe weight: 11.5 t Price - 7800 Eur

Specifications: Center height: 255 mm Center width: 1450 mm Spindle bore: 63 mm Bed width: 385 mm Speeds: (12) 20 - 1100 1/min Tailstock mount: MK 4 Quill stroke: 150 mm Weight, approx.: 2250 kg Dimensions (LxDxH), approx.: 3100 x 1000 x 1580 mm Equipment: - 2-axis digital display - 3-jaw lathe chuck with a set of additional jaws - 6 inserts quick-change bracket System Multifix - Face plate ø 445 mm - Operating tool

turning diameter over bed: 470 mmturning diameter over slide rest: 300 mmturning length: 1000 mmspindle bore: 58 mmturning speeds: 20-2000 U/mintotal power requirement: 5,5 kWweight of the machine ca.: 1800 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.

Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility

Platò diameter: 1300 mm Used lathe in good condition, available unless sold.

Ref. -No.: 10258Manufacturer: SCHAERERType of control: KonventionellStorage location: HalberstadtCountry of origin: GermanyLining: Forkardt F315 BrandMachine length: 3.800 mmMachine width: 1.300 mmMachine Height: 1.500 mmWeight Of The Machine Ca.: 4 tTool holder type: Multifix Typ C Turning Length: 1.800 mmTurning Diameter Over Bed: 520 mmTurning Diameter Over Slide Rest: 320 mmSpindle Bore: 62 mmBezel diameter (inside): 270 mmHole in the jaw chuck: 84 x 120 mm

turning diameter over bed: 520 mmturning diameter over slide rest: 310 mmturning length: 2500 mmtotal power requirement: . kWweight of the machine ca.: 4 tdimensions of the machine ca.: . mThe technical Data are manufacturer or operator information and are therefore non-binding. We reserve the right to make an interim sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in the warehouse Over 8500 m² of storage space, crane capacity 70 tons More than 1000 items Accessories for your workshop If you want to sell machines, production lines or your company, then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 560 mmturning diameter over slide rest: 310 mmturning length: 1700 mmturning diameter in the gap: 610 x 250 mmturning speeds: 9 - 1800 U/mincentre height: 280 mmspindle bore: 72 mmtotal power requirement: 15 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: 4,0 x 1,6 x 1,75 mLead and pull spindle lathe- Rapid traverse- Forkardt 3-jaw chuck 315mm- Multifix steel holder- Copy facility- 1 pc bezel- Coolant system- Machine light- chip tray- Feed protection- Operating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 270 mmturning diameter over slide rest: 130 mmturning length: 500 mmspindle turning speed - stepless: 40-3000 U/minweight of the machine ca.: 1 tdimensions of the machine ca.: 1.5x0.8x1.7 mDigital read-out HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dreh-Øüber Bett: 400 mmDreh-Øüber Support: 220 mmturning length: 1000 mmspindle turning speed range: 12,5 - 2000 U/minspindle taper: Bajonett 55022 spindle bore: 47 mmfeeds - longitudinal: 0,07 - 4,16 mm/Ufeeds - cross: 0.035 - 2,08 mm/Uthread - mm pitch: 0,87 - 192 mmthread - inch: 2 - 24 Gang/ inch.rapid travel - longitudinal/face: 3,4 / 1,7 m/minspindle drive: 11 kWpower capacity: 13 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 2,8 x 1,2 x 1,5 m• 3-jaw chuck Ø 250 mm, 4-jaw chuck 200 mm,• 2-axis- digital display, ANILAM WIZARD LATHE - refinished in 1992,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 315 mm, 630 mm, 10 U/min

Turning diameter over bed 630 mm, center width 3000 mm Speed range 10 - 1250 rpm Feed range longitudinal 0.06 - 1.4 mm/rev, transverse 0.024 - 0.518 mm/rev Spindle passage 65 mm Main drive 15 kW Incl. fixed bezel D approx. 390 mm Rapid traverse 3-B lining,

Center height: 123 mm Center width: 560 mm Circumferential Ø: above bed 280 mm Spindle bore: 27 mm Spindle speeds: 60 - 1250 rpm Feeds: longitudinal/flat 0.091-2.553/0.046-1.292 mm/rev Thread pitches: 0.25 - 11 mm Electrical connection: 380 V, 0.75 kW Dimensions: 1300 x 700 x 1270 mm Weight: approx. 300 kg

turning diameter over bed: 410 mmturning diameter over slide rest: 210 mmturning length: 1500 mmturning diameter in the gap: mmturning speeds: 11 - 2240 U/mincentre height: 205 mmspindle bore: 80 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 3,3 x 1,4 x 1,8 mCenter Lathe- Fagor digital display- Röhm 3-jaw chuck 250mm- Multifix steel holder with 4 cassettes- Coolant system- Machine light- Feed protection- Chip protection wall- chip tray- Emergency stop facilityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24009 Specifications: - Center height 200 mm - Center width 1500 mm - Maximum circulation – Ø above bed 400 mm - over face carriage 210 mm - Spindle bore 56 mm - Pick-up cone of the tailstock quill MK 5 - Tailstock quill travel 150 mm - Spindle speeds 11 - 2240 rpm - Feeds longitudinal + flat - Metric thread pitches -Thread - Module thread - Diametrically pitsch thread - Drive 400 V / 7.5 kW - 3 jaw chuck - Space requirement approx. W 3300 x H 1600 x D 1200 mm - Weight approx. 2800 kg

turning diameter over bed: 500 mmturning diameter over slide rest: 320 mmturning length: 1000 mmcentre height: 250 mmcentre distance: 1000 mmspindle bore: 56 mmspindle turning speed range: 14 - 2240 U/minspindle nose: DIN 55027 Gr. 6 feeds - longitudinal: 0,023 - 4,8 mm/Ufeeds - cross: 0,011 - 2,4 mm/Uface slide travel: 300 mmupper slide travel: 140 mmthread - mm pitch: 0,25 - 60 mmthread - inch: 120 - 1/2 Gg/thread - module: 0,125 - 15 mmtailstock quill diameter: 80 mmtailstock quill stroke: 180 mmtailstock taper MT: 5 total power requirement: 7,5 kWweight of the machine ca.: tdimensions of machine L x W x H: 2,42 x 1,23 x 1,93 mmAccessories: 3-jaw chuck 250 mmø, MULTIFIX-toolpost with various inserts, drill chuck, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: 'SPECIFICATIONS Character: Tos Type: SUI 80 Distance between centers: 2,000 mm Height between centers: 400 mm Turning diameter above the bed: ø800 mm Turning diameter above the base: ø540 mm Door outlet: ø80 mm 4-Jaw chuck'weight approx.: 5,440 kg, Approx. Onsite Dimension. (l x w x h): 4,200 x 1,800 x 1,800 mm

1x Lathe Manufacturer: TOS Type : SUI 80/4000 Year of construction: 2020 Commissioning: 09.2020 Turning length: 4000mm Turning diameter over bed: 800mm Turning diameter via slide: 520mm Speed max: 14-1400rpm Through hole: 92mm Spindle bearing diameter: 140 mm Accessories: - retrofitted frequency converter, - Position indicator 3-AX Heidenhain ND7013, - Quick release head system Multifix D + holder D1D 40180 Machine condition: almost New Delivery time: March 2023

Swing over bed 840 mm Swing over support 530 mm Center distance 2000 mm Spindle bore 82 mm Spindle diameter in front bearing 160 mm Spindle taper - metric 100 Morse Tailstock 6 Maximum workpiece weight at the lowest speed of 6000 kg Largest blade profile 40 x 40 mm Electric motor for headstock drive 18.5 kW Machine dimensions L x W 3420 x 1880 mm Machine weight (according to the spike distance) 5700 kg

turning diameter over bed: 655 mmturning diameter over slide rest: 390 mmturning length: 1250 mmspindle bore: 82 mmspindle turning speed range: 9-1120 U/minfeeds: 0,049-3 mm/Utotal power requirement: 12 kWweight of the machine ca.: 5,2 trequired space: 3,5 x 1,9 x 1,7 m mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 180 mm, 360 mm, 14 U/min

Center height 180 mm Center width 750 mm Circulation diameter over bed 360 mm Spindle bore 41 mm Spindle speed range, stepped 14 – 2,800 rpm Machine weight 1.9 t Connected load 6.5 kW

Height tips 220 mm Useful length 1,000 mm 42 mm bar pass

: 0500 mm: 270 mm: 2000 mm: 250 mm: 73,5 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Turning diameter in the offset 1000 mm , including: surface plate, diameter 850 mm one 3-jaw chuck, diameter 400 mm , clamping jaws one tailstock Drehlänge: 1,300 mm, turning diameter over bed: 700 mm, turning diameter over slide: 500 mm, spindle bore: 80 mm, weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 3,400 x 1,600 x 1,700 mm

Description: Spindle speeds: 65 - 1146 rpm Center length: 800 mm Center height above bed: 150 mm Turning diameter over bed: approx. 300 mm Center height above support: approx. 100 mm Turning diameter above support: approx. 200 mm Spindle clearance: approx. 46 mm The machine is equipped with a tailstock, a Multifix steel holder and a three-jaw chuck (diameter 120 mm) Incl. various machine accessories such as additional jaw chucks, a quick-release clamp, collets and various spare partsweight approx.: 800 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 500 x 1,500 mm

Description: mounting plate Length 2100mm width 935mm Height 210mm Weight 850kgweight approx.: 850 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 935 x 210 mm

: . max. swing diameter: 350 mmcentre distance: 1000 mm: 1980 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: SINO digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 250mm bezel fixed Quick-change steel holder with 4 pcs. steel holder machine light Chip tray, chip protection wall Hardened and ground bed tracks lining protection machine tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Turning diameter in the offset 320 mm Speed 75 - 2000 rpm Center height 160 mm Spindle bore 38 mm Tailstock quill mount MT 3 Connection voltage 400 V Total power requirement 1.5 kWweight approx.: 400 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 750 x 1,700 mm

Description: 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Space requirement approx. 1.9 x 0.8 x 1.56 mweight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 800 x 1,560 mm

Center height: approx. 250 mm, max. turning length: approx. 2000 mm, hollow spindle diameter: approx. 12 mm, with 3-axis digital display, Fabr. HEIDENHAIN, machine light, Multifix quick-release system

turning diameter over bed: 500 mmturning diameter over slide rest: 285 mmturning length: 1500 mmmax. workpiece weight between centres: 500 kgspindle bore: 62 mmspindle turning speed range: (24) 11,2 - 2240 U/minfeeds - longitudinal: 0,063 - 56 mm/Ufeeds - cross: 0,0315 - 28 mm/Ubed width: 360 mmtailstock quill diameter: 80 mmtailstock quill adjustment: 190 mmtailstock quill taper MT: 5 power capacity: 11 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: 4,0 x 1,5 x 1,4 m 2-axes D.R.O. 3-jaw-chuck FORKARDT F250 Faceplate Rapid traverse Multifix toolholder 2 x steady-rest Coolant equipment DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 570 mmturning diameter over slide rest: 365 mmturning length: 1500 mmcentre distance: 1800 mmspindle turning speed range: 11-2240 U/minspindle bore: 62 mmweight of the machine ca.: 4 tMisc accessoriesMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500-600 mmturning diameter over slide rest: / mmturning length: 2800 mmbore diameter: 130 mmtotal power requirement: / kWweight of the machine ca.: 5,25 trequired space: / mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Leit- und Zugspindeldrehmaschine - 3-Backen-Futter 250mm - Multifix-Stahlhalter - Kühlmittelanlage - Futterschutz - Maschinenleuchte Drehdurchmesser über Bett 380 mm Drehdurchmesser über Support 200 mm Drehlänge 600 mm Drehzahl 40 - 1800 U/min Spitzenhöhe 190 mm Spindelbohrung 56 mm Gesamtleistungsbedarf 5,5 kW Maschinengewicht ca. 1,65 t Raumbedarf ca. 2,55 x 1,35 x 1,5 mweight approx.: 1,650 kg, Approx. Onsite Dimension. (l x w x h): 2,550 x 1,350 x 1,500 mm